 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Surface Mount Optically Coupled Isolator 4N22U, 4N23U, 4N24U (COTS, TX, TXV) 4N47U, 4N48U, 4N49U (COTS, TX, TXV) Features: * * * * Surface Mount (SM), Leadless Chip Carrier (LCC) 1 kV electrical isolation Base contact provided for conventional transistor biasing TX and TXV devices processed to MIL-PRF-19500 Description: Each isolator in this series has a 890 nm (for the 4N2_U series) and 935nm (for the 4N4_ series) wavelength infrared emitting diode and a NPN silicon phototransistor, which are mounted in a hermetically sealed Surface Mount, 6 Pin package. Devices are designed for military and/or harsh environments. Burn-in condition is VCE = 10V, IF = 40mA, PD = 275 mW, TA = 25 C. The 4N22U, 4N23U and 4N24U (TX, TXV) devices are processed to MIL-PRF-19500/486. The 4N47U, 4N48U and 4N48U (TX, TXV) devices are processed to MIL-PRF-19500/548. Please contact your local representative or OPTEK for more information. Ordering Information Applications: * * * * * * * Military equipment High-Reliability environments High voltage isolation between input and output Electrical isolation in dirty environments Industrial equipment Medical equipment Office equipment 4N22U 4N22UTX 4N22UTXV 4N23U 4N23UTX 4N23UTXV 4N24U 4N24UTX 4N24UTXV 4N47U 4N47UTX 4N47UTXV 4N48U 4N48UTX 4N48UTXV 4N49U 4N49UTX 4N49UTXV 200 935 nm 100 50 Transistor 1 100 10 / 40 890 nm 60 25 Part Number LED Peak Wavelength Sensor Isolation Voltage (kV) CTR % Minimum IF (mA) Typ / Max VCE (Volts) Max Processing MIL-PRF195000 COTS 486 COTS 35 486 COTS 486 COTS 548 COTS 45 548 COTS 548 RoHS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .1 03/09 Page 1 of 5 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Surface Mount Optically Coupled Isolator 4N22U, 4N23U, 4N24U (COTS, TX, TXV) 4N47U, 4N48U, 4N49U (COTS, TX, TXV) Absolute Maximum Ratings (TA = 25o C unless otherwise noted) Storage Temperature Operating Temperature Input-to-Output Isolation Voltage (1)(2) (3) -65 C to +150 C -55 C to +125 C 1 kVDC 260 C 50 mA 2V 300 mW 35 V 7.0 V 100 mW Lead Soldering Temperature (1/16" (1.6 mm) from case for 5 seconds with soldering iron) Input Diode Forward DC Current(4) Reverse DC Voltage Power Dissipation (5) Output Photosensor Collector-Emitter Voltage Emitter-Collector Voltage Power Dissipation (6) Forward Voltage vs Forward Current vs Temperature 1.5 1.6 Collector Current vs Forward Current vs Temperature Normalized at +25C and IF = 20 Normalized - IC(ON) - Collector Current (mA) 1.4 1.4 VF - Forward Voltage (V) 1.3 1.2 1.0 1.2 -55 1.1 -35 -15 +5 1.0 +25 +45 +65 0.9 +85 +105 0.8 0 5 10 15 20 +125 25 0.8 0.6 -55 -35 -15 +5 +25 +45 +65 +85 +105 +125 0.4 0.2 0.0 0 5 10 15 20 25 IF - Forward Current (mA) IF - Forward current (mA) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.1 03/09 Page 2 of 5 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Surface Mount Optically Coupled Isolator 4N22U, 4N23U, 4N24U (COTS, TX, TXV) 4N47U, 4N48U, 4N49U (COTS, TX, TXV) Electrical Characteristics (TA = 25o C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode (See OP165 or OP265 for additional information - for reference only) Forward Voltage 4N22, 4N23, 4N24 [A] (COTS, TX, TXV) 4N22, 4N23, 4N24 [A] (COTS, TX, TXV) 4N22, 4N23, 4N24 [A] (COTS, TX, TXV) 4N47, 4N48, 4N49 [A] (COTS, TX, TXV) 4N47, 4N48, 4N49 [A] (COTS, TX, TXV) 4N47, 4N48, 4N49 [A] (COTS, TX, TXV) Reverse Current 0.80 1.00 0.70 0.80 1.00 0.70 1.30 1.50 1.20 1.50 1.70 1.30 100 IF = 10.0 mA IF = 10.0 mA, TA = -55 C(1) IF = 10.0 mA, TA = -100 C(1) IF = 10.0 mA IF = 10.0 mA, TA = -55 C(1) IF = 10.0 mA, TA = -100 C(1) VR = 2.0 V VF V IR A Output Photosensor (See OP505 for additional information - for reference only) V(BR)CEO Collector-Emitter Breakdown Voltage 4N22U Series 4N47U Series Emitter-Collector Breakdown Voltage 4N22U Series 4N47U Series Collector-Emitter Dark Current Collector Saturation Voltage 35 40 4 7 80 90 6 10 20 0.2 100 100 0.3 V IC = 100 A, IF = 0 V(BR)ECO ICEO VCE(SAT) Notes: (1) (2) (3) (4) (5) (6) V nA A V IE = 100 A, IF = 0 VCE = 20 V, IF = 0 IB= 0 TA = 25C VCE = 20 V, IF = 0 IB= 0 TA = 100C IF = 20 mA, IC = 2 mA Measured with input and output leads shorted. Typical input/output capacitance is 0.06 pF. UL recognition is for 3500 VAC for one minute. RMA flux is recommended. The duration can be extended to 10 seconds maximum when flow soldering. Derate linearly 0.67 mA/C above 25C. Derate linearly 0.83 mA/C above 25C. Derate linearly 1.67 mA/C above 25C. 0.090 [2.29] 0.245 [6.22] 0.073 [1.85] 0.025 [0.64] 2 1 6 0.065 [1.65] 1 3 4 5 0.170 [4.32] 0.050 [1.27] Pin 1 Identifier DIMENSIONS ARE IN: [MILLIMETERS] INCHES 3 Pin # 4 LED N/A Anode Cathode Pin # 3 4 5 Transistor Collector Base Emitter 2 1 6 6 5 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .1 03/09 Page 3 of 5 Surface Mount Optically Coupled Isolator 4N22U, 4N23U, 4N24U (COTS, TX, TXV) 4N47U, 4N48U, 4N49U (COTS, TX, TXV) Coupled 4N22U 4N23U 4N24U 4N47U 4N48U 4N49U 4N22U 25 60 100 50 100 200 0.15 2.50 1.00 1.00 0.2 6.0 2.5 2.5 0.4 10.0 4.0 4.0 0.5 0.7 0.5 1.0 1.4 1.0 2.0 2.8 2.0 200 300 400 100 100 100 1011 5.0 10.0 0.3 0.3 0.3 0.3 0.3 0.3 15 15 20 20 20 20 5.0 % IF = 10 mA, VCE = 5 V IC/IF DC Current Transfer Ratio % IF = 2 mA, VCE = 5 V VCE = 10 V, IB = 0, IF = 2.0 mA TA = 25C VCE = 10 V, IB = 0, IF = 10.0 mA TA = 25C VCE = 10 V, IB = 0, IF = 10.0 mA TA = -55C VCE = 10 V, IB = 0, IF = 10.0 mA TA = 100C VCE = 10 V, IB = 0, IF = 2.0 mA TA = 25C VCE = 10 V, IB = 0, IF = 10.0 mA TA = 25C VCE = 10 V, IB = 0, IF = 10.0 mA TA = -55C VCE = 10 V, IB = 0, IF = 10.0 mA TA = 100C VCE = 10 V, IB = 0, IF = 2.0 mA TA = 25C VCE = 10 V, IB = 0, IF = 10.0 mA TA = 25C VCE = 10 V, IB = 0, IF = 10.0 mA TA = -55C VCE = 10 V, IB = 0, IF = 10.0 mA TA = 100C VCE = 5 V, IB = 0, IF = 1.0 mA TA = 25C VCE = 5 V, IB = 0, IF = 2.0 mA TA = -55C VCE = 5 V, IB = 0, IF = 2.0 mA TA = 100C VCE = 5 V, IB = 0, IF = 1.0 mA TA = 25C VCE = 5 V, IB = 0, IF = 2.0 mA TA = -55C VCE = 5 V, IB = 0, IF = 2.0 mA TA = 100C VCE = 5 V, IB = 0, IF = 1.0 mA TA = 25C VCE = 5 V, IB = 0, IF = 2.0 mA TA = -55C VCE = 5 V, IB = 0, IF = 2.0 mA TA = 100C IC = 2.5 mA, IB = 0, IF = 20 mA IC = 5.0 mA, IB = 0, IF = 20 mA IC = 10.0 mA, IB = 0, IF = 20 mA IC = 0.5 mA, IB = 0, IF = 2.0 mA IC = 1.0 mA, IB = 0, IF = 2.0 mA IC = 2.0 mA, IB = 0, IF = 2.0 mA mA 4N23U mA IC(ON) On-State Collector Current 4N24U mA 4N47U mA 4N48U mA 4N49U 4N22U 4N23U 4N24U 4N47U 4N48U 4N49U 4N22U 4N23U 4N24U 4N47U 4N48U 4N49U 4N22U 4N23U 4N24U 4N47U 4N48U 4N49U mA VCE(SAT) Collector Saturation Voltage V V hFE DC Current Gain - VCE = 5 V, IC = 10 mA, IF = 0 mA s VCC = 10 V, IF = 10 mA, RL = 100, Pulse width = 100 ms, Duty cycle = 1% VCC = 10 V, IF = 5 mA, RL = 100, Pulse width = 100 ms, Duty cycle = 1% VIO = 1,000 Vdc VIO = 0 Vdc, f = 1.0 MHz tr & tf Rise and Fall Time s pF RIO CIO Resistance (Input to Output) Capacitance (Input to Output) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.1 03/09 Page 4 of 5 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Surface Mount Optically Coupled Isolator 4N22U, 4N23U, 4N24U (COTS, TX, TXV) 4N47U, 4N48U, 4N49U (COTS, TX, TXV) Electrical Characteristics (TA = 25C unless otherwise noted) SYMBO L Coupled On-State Collector Current 4N22, 4N22A (COTS, TX, TXV) 4N22, 4N22A (COTS, TX, TXV) 4N22, 4N22A (COTS, TX, TXV) 4N22, 4N22A (COTS, TX, TXV) 4N23, 4N23A (COTS, TX, TXV) 4N23, 4N23A (COTS, TX, TXV) 4N23, 4N23A (COTS, TX, TXV) 4N23, 4N23A (COTS, TX, TXV) IC(ON) 4N24, 4N24A (COTS, TX, TXV) 4N24, 4N24A (COTS, TX, TXV) 4N24, 4N24A (COTS, TX, TXV) 4N24, 4N24A (COTS, TX, TXV) 4N47, 4N47A (COTS, TX, TXV) 4N47, 4N47A (COTS, TX, TXV) 4N47, 4N47A (COTS, TX, TXV) 4N48, 4N48A (COTS, TX, TXV) 4N48, 4N48A (COTS, TX, TXV) 4N48, 4N48A (COTS, TX, TXV) 4N49, 4N49A (COTS, TX, TXV) 4N49, 4N49A (COTS, TX, TXV) 4N49, 4N49A (COTS, TX, TXV) ICB(ON) On-State Collector Base 4N47, 4N48, 4N49 [A] (COTS, TX, TXV) Collector-Emitter Saturation Voltage 4N22, 4N23, 4N24 [A] (COTS, TX, TXV) 4N22, 4N23, 4N24 [A] (COTS, TX, TXV) 4N22, 4N23, 4N24 [A] (COTS, TX, TXV) 4N47, 4N47A (COTS, TX, TXV) 4N48, 4N48A (COTS, TX, TXV) 4N49, 4N49A (COTS, TX, TXV) DC Current Gain 4N22, 4N22A (COTS, TX, TXV) 4N23, 4N23A (COTS, TX, TXV) 4N24, 4N24A (COTS, TX, TXV) 4N47, 4N48, 4N49 [A] (COTS, TX, TXV) Resistance (Input-to-Output) 4N22, 4N23, 4N24 [A] (COTS, TX, TXV) 4N47, 4N48, 4N49 [A] (COTS, TX, TXV) Capacitance (Input-to-Output) PARAMETER MIN TYP MAX UNITS TEST CONDITIONS 0.15 2.50 1.00 1.00 0.20 6.00 2.50 2.50 0.40 10.0 4.00 4.00 0.50 0.70 0.50 1.00 1.40 1.00 2.00 2.80 2.00 30 200 300 400 100 1011 1011 - - 5 10 0.30 0.30 0.30 0.30 0.30 0.30 5 A IF = 2.0 mA , VCE = 5 V, IB = 0 IF = 10.0 mA , VCE = 5 V, IB = 0 (1) IF = 10.0 mA , VCE = 5 V, IB = 0, TA = -55 C (1) IF = 10.0 mA , VCE = 5 V, IB = 0, TA = 100 C IF = 2.0 mA , VCE = 5 V, IB = 0 IF = 10.0 mA , VCE = 5 V, IB = 0 (1) IF = 10.0 mA , VCE = 5 V, IB = 0, TA = -55 C (1) IF = 10.0 mA , VCE = 5 V, IB = 0, TA = 100 C IF = 2.0 mA , VCE = 5 V, IB = 0 IF = 10.0 mA , VCE = 5 V, IB = 0 (1) IF = 10.0 mA , VCE = 5 V, IB = 0, TA = -55 C (1) IF = 10.0 mA , VCE = 5 V, IB = 0, TA = 100 C IF = 1.0 Ma, VCE = 5.0 V, IB = 0 (1) IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = -55 C (1) IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = 100 C IF = 1.0 mA, VCE = 5.0 V, IB = 0 (1) IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = -55 C (1) IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = 100 C IF = 1.0 mA, VCE = 5.0 V, IB = 0 (1) IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = -55 C (1) IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = 100 C VCB = 5 V, IE = 0, IF = 10 mA IF = 20 mA , IC = 2.5 mA, IB = 0 IF = 20 mA , IC = 5.0 mA, IB = 0 IF = 20 mA , IC = 10.0 mA, IB = 0 IF = 2.0 mA, IC = 0.5 mA, IB = 0 IF = 2.0 mA, IC = 1.0 mA, IB = 0 IF = 2.0 mA, IC = 2.0 mA, IB = 0 VCE = 5.0 V , IC = 10.0 mA, IF = 0 mA VCE = 5.0 V , IC = 10.0 mA, IF = 0 mA VCE = 5.0 V , IC = 10.0 mA, IF = 0 mA VCE = 5.0 V , IC = 10.0 mA, IF = 0 mA V10 = 1.0 VDC(3) VI-O = 1000 VDC(3) VI-O = 0 V, f = 1.0 MHz(3) mA VCE(SAT) V HFE V RIO CIO pF OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .1 03/09 Page 5 of 5 |
Price & Availability of 4N22U
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |