 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| www..com PMEGxx05ET series 0.5 A very low VF MEGA Schottky barrier rectifiers in SOT23 package Rev. 01 -- 15 July 2005 Product data sheet 1. Product profile 1.1 General description Planar Maximum Efficiency General Application (MEGA) Schottky barrier rectifier with an integrated guard ring for stress protection, encapsulated in a SOT23 small Surface Mounted Device (SMD) plastic package. Table 1: Product overview Package Philips PMEG2005ET PMEG3005ET PMEG4005ET SOT23 SOT23 SOT23 JEITA single diode single diode single diode Configuration Type number 1.2 Features s Forward current: 0.5 A s Very low forward voltage s Small SMD plastic package 1.3 Applications s s s s s Low voltage rectification High efficiency DC-to-DC conversion Switch mode power supply Inverse polarity protection Low power consumption applications www..com Philips Semiconductors PMEGxx05ET series 0.5 A very low VF MEGA Schottky barrier rectifiers in SOT23 package 1.4 Quick reference data Table 2: Symbol IF VR Quick reference data Parameter forward current reverse voltage PMEG2005ET PMEG3005ET PMEG4005ET VF forward voltage PMEG2005ET PMEG3005ET PMEG4005ET [1] Pulse test: tp 300 s; 0.02. Conditions Min - Typ 355 380 420 Max 0.5 20 30 40 390 430 470 Unit A V V V mV mV mV IF = 500 mA [1] - 2. Pinning information Table 3: Pin 1 2 3 Pinning Description anode not connected cathode 1 2 3 Simplified outline 3 Symbol 1 2 n.c. mlc357 3. Ordering information Table 4: Ordering information Package Name PMEG2005ET PMEG3005ET PMEG4005ET Description plastic surface mounted package; 3 leads plastic surface mounted package; 3 leads plastic surface mounted package; 3 leads Version SOT23 SOT23 SOT23 Type number 9397 750 15183 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 01 -- 15 July 2005 2 of 12 www..com Philips Semiconductors PMEGxx05ET series 0.5 A very low VF MEGA Schottky barrier rectifiers in SOT23 package 4. Marking Table 5: Marking codes Marking code [1] P3* P4* P5* Type number PMEG2005ET PMEG3005ET PMEG4005ET [1] * = -: made in Hong Kong * = p: made in Hong Kong * = t: made in Malaysia * = W: made in China 5. Limiting values Table 6: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter VR reverse voltage PMEG2005ET PMEG3005ET PMEG4005ET IF IFRM IFSM Ptot Tj Tamb Tstg [1] [2] Conditions Min - Max 20 30 40 0.5 3.9 10 280 420 150 +150 +150 Unit V V V A A A mW mW C C C forward current repetitive peak forward current non-repetitive peak forward current total power dissipation junction temperature ambient temperature storage temperature tp 1 ms; 0.5 tp = 8 ms square wave Tamb 25 C [1] -65 -65 [1] [2] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint. Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm2. 6. Thermal characteristics Table 7: Symbol Rth(j-a) Thermal characteristics Parameter thermal resistance from junction to ambient Conditions in free air [1] [2] [1] [3] Min - Typ - Max 440 300 Unit K/W K/W [1] For Schottky barrier diodes thermal run-away has to be considered, as in some applications the reverse power losses PR are a significant part of the total power losses. Nomograms for determining the reverse power losses PR and IF(AV) rating will be available on request. Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm2. (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. [2] [3] 9397 750 15183 Product data sheet Rev. 01 -- 15 July 2005 3 of 12 www..com Philips Semiconductors PMEGxx05ET series 0.5 A very low VF MEGA Schottky barrier rectifiers in SOT23 package 7. Characteristics Table 8: Characteristics Tamb = 25 C unless otherwise specified. Symbol VF Parameter forward voltage PMEG2005ET IF = 0.1 mA IF = 1 mA IF = 10 mA IF = 100 mA IF = 500 mA PMEG3005ET IF = 0.1 mA IF = 1 mA IF = 10 mA IF = 100 mA IF = 500 mA PMEG4005ET IF = 0.1 mA IF = 1 mA IF = 10 mA IF = 100 mA IF = 500 mA IR reverse current PMEG2005ET PMEG3005ET PMEG4005ET Cd diode capacitance PMEG2005ET PMEG3005ET PMEG4005ET [1] Pulse test: tp 300 s; 0.02. Conditions [1] Min - Typ 90 150 210 280 355 90 150 215 285 380 95 155 220 295 420 15 40 12 40 7 30 66 55 43 Max 130 190 240 330 390 130 200 250 340 430 130 210 270 350 470 40 200 30 150 20 100 80 70 50 Unit mV mV mV mV mV mV mV mV mV mV mV mV mV mV mV A A A A A A pF pF pF VR = 10 V VR = 20 V VR = 10 V VR = 30 V VR = 10 V VR = 40 V VR = 1 V; f = 1 MHz 9397 750 15183 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 01 -- 15 July 2005 4 of 12 www..com Philips Semiconductors PMEGxx05ET series 0.5 A very low VF MEGA Schottky barrier rectifiers in SOT23 package 104 IF (mA) 103 006aaa517 IR (A) 105 (1) 006aaa518 104 103 102 (2) (3) (4) 102 10 1 (1) (2) (3) (4) (5) 10 10-1 (5) 10-2 1 0 0.2 0.4 VF (V) 0.6 10-3 0 5 10 15 VR (V) 20 (1) Tamb = 150 C (2) Tamb = 125 C (3) Tamb = 85 C (4) Tamb = 25 C (5) Tamb = -40 C (1) Tamb = 150 C (2) Tamb = 125 C (3) Tamb = 85 C (4) Tamb = 25 C (5) Tamb = -40 C Fig 1. PMEG2005ET: Forward current as a function of forward voltage; typical values 120 Cd (pF) 80 Fig 2. PMEG2005ET: Reverse current as a function of reverse voltage; typical values 006aaa249 40 0 0 4 8 12 16 VR (V) 20 Tamb = 25 C; f = 1 MHz Fig 3. PMEG2005ET: Diode capacitance as a function of reverse voltage; typical values 9397 750 15183 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 01 -- 15 July 2005 5 of 12 www..com Philips Semiconductors PMEGxx05ET series 0.5 A very low VF MEGA Schottky barrier rectifiers in SOT23 package 104 IF (mA) 103 006aaa519 IR (A) 105 104 103 102 006aaa520 (1) (2) (3) (4) 102 10 1 (1) (2) (3) (4) (5) 10 10-1 10-2 (5) 1 0 0.2 0.4 0.6 VF (V) 0.8 10-3 0 5 10 15 20 25 30 VR (V) (1) Tamb = 150 C (2) Tamb = 125 C (3) Tamb = 85 C (4) Tamb = 25 C (5) Tamb = -40 C (1) Tamb = 150 C (2) Tamb = 125 C (3) Tamb = 85 C (4) Tamb = 25 C (5) Tamb = -40 C Fig 4. PMEG3005ET: Forward current as a function of forward voltage; typical values 120 Cd (pF) 80 Fig 5. PMEG3005ET: Reverse current as a function of reverse voltage; typical values 006aaa252 40 0 0 10 20 VR (V) 30 Tamb = 25 C; f = 1 MHz Fig 6. PMEG3005ET: Diode capacitance as a function of reverse voltage; typical values 9397 750 15183 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 01 -- 15 July 2005 6 of 12 www..com Philips Semiconductors PMEGxx05ET series 0.5 A very low VF MEGA Schottky barrier rectifiers in SOT23 package 104 IF (mA) 103 006aaa521 IR (A) 105 (1) 006aaa522 104 103 102 (2) (3) (4) 102 10 1 (1) (2) (3) (4) (5) 10 10-1 (5) 10-2 1 0 0.2 0.4 0.6 0.8 VF (V) 1.0 10-3 0 10 20 30 VR (V) 40 (1) Tamb = 150 C (2) Tamb = 125 C (3) Tamb = 85 C (4) Tamb = 25 C (5) Tamb = -40 C (1) Tamb = 150 C (2) Tamb = 125 C (3) Tamb = 85 C (4) Tamb = 25 C (5) Tamb = -40 C Fig 7. PMEG4005ET: Forward current as a function of forward voltage; typical values 100 Cd (pF) 80 Fig 8. PMEG4005ET: Reverse current as a function of reverse voltage; typical values 006aaa255 60 40 20 0 0 10 20 30 VR (V) 40 Tamb = 25 C; f = 1 MHz Fig 9. PMEG4005ET: Diode capacitance as a function of reverse voltage; typical values 9397 750 15183 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 01 -- 15 July 2005 7 of 12 www..com Philips Semiconductors PMEGxx05ET series 0.5 A very low VF MEGA Schottky barrier rectifiers in SOT23 package 8. Package outline 3.0 2.8 3 1.1 0.9 0.45 0.15 2.5 1.4 2.1 1.2 1 2 1.9 Dimensions in mm 0.48 0.38 0.15 0.09 04-11-04 Fig 10. Package outline SOT23 (TO-236AB) 9. Packing information Table 9: Packing methods The -xxx numbers are the last three digits of the 12NC ordering code. [1] Type number PMEG2005ET PMEG3005ET PMEG4005ET [1] For further information and the availability of packing methods, see Section 16. Package SOT23 Description 4 mm pitch, 8 mm tape and reel Packing quantity 3000 -215 10000 -235 9397 750 15183 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 01 -- 15 July 2005 8 of 12 www..com Philips Semiconductors PMEGxx05ET series 0.5 A very low VF MEGA Schottky barrier rectifiers in SOT23 package 10. Soldering 2.90 2.50 solder lands solder resist 0.85 3.00 0.85 1.30 3 0.60 (3x) 0.50 (3x) 0.60 (3x) 1.00 3.30 MSA439 2 1 2.70 occupied area solder paste Reflow soldering is the only recommended soldering method. Dimensions in mm Fig 11. Reflow soldering footprint SOT23 (TO-236AB) 9397 750 15183 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 01 -- 15 July 2005 9 of 12 www..com Philips Semiconductors PMEGxx05ET series 0.5 A very low VF MEGA Schottky barrier rectifiers in SOT23 package 11. Revision history Table 10: Revision history Release date Data sheet status Product data sheet Change notice Doc. number 9397 750 15183 Supersedes Document ID PMEGXX05ET_SER_1 20050715 9397 750 15183 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 01 -- 15 July 2005 10 of 12 www..com Philips Semiconductors PMEGxx05ET series 0.5 A very low VF MEGA Schottky barrier rectifiers in SOT23 package 12. Data sheet status Level I II Data sheet status [1] Objective data Preliminary data Product status [2] [3] Development Qualification Definition This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). III Product data Production [1] [2] [3] Please consult the most recently issued data sheet before initiating or completing a design. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 13. Definitions Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 15. Trademarks Notice -- All referenced brands, product names, service names and trademarks are the property of their respective owners. 14. Disclaimers Life support -- These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors 16. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com 9397 750 15183 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 01 -- 15 July 2005 11 of 12 www..com Philips Semiconductors PMEGxx05ET series 0.5 A very low VF MEGA Schottky barrier rectifiers in SOT23 package 17. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description. . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data. . . . . . . . . . . . . . . . . . . . . 2 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3 Thermal characteristics. . . . . . . . . . . . . . . . . . . 3 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8 Packing information. . . . . . . . . . . . . . . . . . . . . . 8 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 10 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 11 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Contact information . . . . . . . . . . . . . . . . . . . . 11 (c) Koninklijke Philips Electronics N.V. 2005 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 15 July 2005 Document number: 9397 750 15183 Published in The Netherlands |
Price & Availability of PMEG2005ET
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |