View PC3SD12NTZA_316068.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PC3SD12NTZA
PC3SD12NTZA
s Features
1. Isolation voltage between input and output (Viso (rms):5kV) 2. High critical rate of rise of OFF-state voltage (dV/dt:MIN. 1 000V/s) 3. Recognized by UL, file No. E64380 PC3SD12NTZA is for 200V line
Phototriac Coupler for Triggering
s Outline Dimensions
6 5 4
(Unit : mm)
Internal connection diagram
6 5 4
6.50.3
Anode mark
3SD12
s Applications
1. Home appliances 2. OA equipment, FA equipment 3. SSRs
1
2
3
0.60.2 1.20.3 3.50.5
N.C.
1 2 3
7.120.3
7.620.3 0.5TYP.
s Absolute Maximum Ratings
(Ta=25C) Unit mA V A A V kV C C C
Parameter Symbol Rating *1 50 Forward current IF Input Reverse voltage VR 6 *1 RMS ON-state current IT (rms) 0.1 Output Peak one cycle surge current Isurge 1.2 (50Hz sine wave) Repetitive peak OFF-state voltage VDRM 600 *2 Isolation voltage Viso (rms) 5 Operating temperature -30 to +100 Topr Storage temperature -55 to +125 Tstg Soldering temperature Tsol 260 (For 10s)
2.90.5
3.250.5
0.50.1 2.540.25
1 2 3
0.260.1 =0 to 13
Anode Cathode NC
4 5 6
Anode, Cathode No external connection Anode, Cathode
Pin
5
is not allowed external connection
*1 The derating factors of absolute maximum ratings due to ambient temperature are shown in Fig.1, 2 *2 AC for 1 min, 40 to 60%RH, f=60Hz
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
PC3SD12NTZA s Electro-optical Characteristics
Input Symbol Parameter VF Forward voltage Reverse current IR Repetitive peak OFF-state current IDRM ON-state voltage VT IH Holding current Critical rate of rise of OFF-state voltage dV/dt Minimum trigger current Isolation resistance Turn-on time IFT RISO ton Conditions IF=20mA VR=3V VD=VDRM IT=0.1A VD=6V - VD=1/2 * VDRM VD=6V, RL=100 DC=500V, 40 to 60%RH VD=6V, RL=100, IF=20mA MIN. - - - - 0.1 1 000 - 5x1010 - TYP. 1.2 - - - - 2 000 - 1011 - MAX. 1.4 10-5 10-6 2.5 3.5 - 10 - 50 (Ta=25C) Unit V A A V mA V/s mA s
Output
Transfer characteristics
Fig.1 RMS ON-state Current vs. Ambient Temperature
175 RMS ON-state current IT (rms) (mA) 150
Fig.2 Forward Current vs. Ambient Temperature
70 60 Forward current IF (mA) 50 40 30 20 10 0 -30-20-10 0 10 20 30 40 50 60 70 80 90 100 Ambient temperature Ta (C)
125 100 75 50 25 0 -30-20-10 0 10 20 30 40 50 60 70 80 90 100 Ambient temperature Ta (C)
Fig.3 Forward Current vs. Forward Voltage
200 100
Fig.4 Minimum Trigger Current vs. Ambient Temperature
10 9 Minimum trigger current IFT (mA) VD=6V RL=100
Forward current IF (mA)
50
Ta=100C 75C 50C 25C 0C -30C
8 7 6 5 4 3 2 1
20 10 5
2 1 0 0.5 1 1.5 2 2.5 3 Forward voltage VF (V)
0 -40
-20
0
20
40
60
80
100
Ambient temperature Ta (C)
PC3SD12NTZA Fig.5 A ON-state Voltage vs. Ambient Temperature
2 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1 -40 -20 0 20 40 60 80 100 0.1 -40 -20 0 20 40 60 80 100 Holding current IH (mA) ON-state voltage VT (V) IT=100mA
Fig.6 Holding Current vs. Ambient Temperature
10 VD=6V
1
Ambient temperature Ta (C)
Ambient temperature Ta (C)
Fig.7 Repetitive Peak OFF-state Current vs. Ambient Temperature
1 Repetitive peak OFF-state current IDRM (A) VD=600V
Fig.8 Relative Repetitive Peak OFF-state Voltage vs. Ambient Temperature
1.3 Relative repetitive peak OFF-state voltage VDRM (Tj=Ta) / VDRM (Tj=25C)
1.2
0.1
1.1
0.01
1
0.9
0.001
0.8 0.7 -40
0.0001 -40
-20
0
20
40
60
80
100
-20
0
20
40
60
80
100
Ambient temperature Ta (C)
Ambient temperature Ta (C)
Fig.9 Turn-on Time vs. Forward Current
1 000 VD=6V RL=100 Ta=25C
Turn-on time ton (s)
100
10 1 10 Forward current IF (mA) 100
Application Circuits
NOTICE
qThe circuit application examples in this publication are provided to explain representative applications of SHARP devices and are not intended to guarantee any circuit design or license any intellectual property rights. SHARP takes no responsibility for any problems related to any intellectual property right of a third party resulting from the use of SHARP's devices. qContact SHARP in order to obtain the latest device specification sheets before using any SHARP device. SHARP reserves the right to make changes in the specifications, characteristics, data, materials, structure, and other contents described herein at any time without notice in order to improve design or reliability. Manufacturing locations are also subject to change without notice. qObserve the following points when using any devices in this publication. SHARP takes no responsibility for damage caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used specified in the relevant specification sheet nor meet the following conditions: (i) The devices in this publication are designed for use in general electronic equipment designs such as: --- Personal computers --- Office automation equipment --- Telecommunication equipment [terminal] --- Test and measurement equipment --- Industrial control --- Audio visual equipment --- Consumer electronics (ii)Measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when SHARP devices are used for or in connection with equipment that requires higher reliability such as: --- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.) --- Traffic signals --- Gas leakage sensor breakers --- Alarm equipment --- Various safety devices, etc. (iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety such as: --- Space applications --- Telecommunication equipment [trunk lines] --- Nuclear power control equipment --- Medical and other life support equipment (e.g., scuba). qContact a SHARP representative in advance when intending to use SHARP devices for any "specific" applications other than those recommended by SHARP or when it is unclear which category mentioned above controls the intended use. qIf the SHARP devices listed in this publication fall within the scope of strategic products described in the Foreign Exchange and Foreign Trade Control Law of Japan, it is necessary to obtain approval to export such SHARP devices. qThis publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of SHARP. Express written permission is also required before any use of this publication may be made by a third party. qContact and consult with a SHARP representative if there are any questions about the contents of this publication.
115

▲Up To Search▲

Price & Availability of PC3SD12NTZA

	To Download PC3SD12NTZA Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .