|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
O PTREX w w w .D om Technical Specification LCD.c Module U t4 T-51383L070J-FW-P-AA ee Sh ta a Prepared by (Production Div.) First Edition Jan 1, 2001 Final Revision ****** Checked by (Quality Assurance Div.) Checked by (Design Engineering Div.) Table of Contents 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Applications........................................................................................................................................................... 2 Features ..................................................................................................................................................................... 2 Mechanical Specifications ......................................................................................................................... 2 Mechanical Drawing TFT LCD Module..................................................................................... 3 Input / Output Terminals.......................................................................................................................... 4 Absolute Maximum Ratings ..................................................................................................................... 6 Electrical Characteristics............................................................................................................................... 6 Power Sequence......................................................................................................................................... 15 Optical Characteristics................................................................................................................................ 16 Handing Cautions........................................................................................................................................... 17 Reliability TEST ............................................................................................................................................. 22 Block Diagram....................................................................................................................................................23 Revision History Rev. Date w w w .D Page t a S a e h t e U 4 .c m o Comment T-51383L070J-FW-P-AA OPTREX CORPORATION w w w .D at Sh a et e 4U . om c Page-1/22 1. Application This technical specification applies to 7.0" color TFT-LCD module. The applications of the panel are car TV, portable DVD,GPS, multimedia applications and others AV system. 2. Features . Compatible with NTSC & PAL system . Pixel in stripe configuration . Slim and compact . High Brightness . Image Reversion Up/Down and Left/Right . Multi Video Display Mode 3. Mechanical Specifications Parameter Screen Size Display Format Active Area Dot Pitch Pixel Configuration Outline Dimension Surface Treatment Weight Specifications 7.0 (16:9 diagonal) 1440 (H) 154.08 (H) 234(V) 87.05 (V) Unit inch dot mm mm mm g 0.107(H) 0.372 (V) Stripe 167.1 (W)x102.0 (H)x12.0 (D)(typ.) Anti-Glare and Hard Coating 20510 T-51383L070J-FW-P-AA OPTREX CORPORATION Page-2/22 4. Mechanical Drawing of TFT-LCD Module T-51383L070J-FW-P-AA OPTREX CORPORATION Page-3/22 5. Input / Output Terminals 5-1) TFT-LCD Panel Driving The interface connector is 6210-30P Series manufactured by ELCO or equivalent. (0.5mm pitch 30 pin) The connector interface pin assignments are listed in the Table below. Pin No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Symbol PSI VR VG VB GND CSY NC NC NC NC MODE 1 MODE 2 MODE 3 GND BLK HSY VSY VDD NC FRP GND U/D L/R N/P NC NC GND VCC VGH VGL I I I I O I I I I I I I I O O O I I/O O I I I I I Red Video Input Green Video Input Blue Video Input Ground Composite Sync Input No Connection No Connection No Connection No Connection Display mode selection pin 1 (refer to 5.2) Display mode selection pin 2 (refer to 5.2) Display mode selection pin 3 (refer to 5.2) Ground Video Signal Mask Timing Output Horizontal Sync Output Vertical Sync Output Input Voltage For Logic/Logic Voltage For Source Driver No Connection Video Polarity Control Signal Ground Scanning Direction : (Low : Normal , High : Reverse) Scanning Direction : (Low : Normal , High : Reverse) NTSC/PAL Selection Signal(Low : PAL , High : NTSC) No Connection No Connection Ground Analog Voltage For Source Driver/Logic Voltage For Gate Positive Voltage For Gate Driver Negative Voltage For Gate Driver Description Synchronize Pulse for Decoder Remark T-51383L070J-FW-P-AA OPTREX CORPORATION Page-4/22 5.2)Display Mode NO:11 Display Mode Display (Input Signal of 4:3 Aspect Ratio) Mode 1 NO:12 Mode 2 NO:13 Note Mode 3 Full Low Low Low Input Video Signals Are Displayed In Full Screen. Normal Center High Low Low Input Video Signals Are Displayed In The Center Screen.(4:3 Aspect Ratio) Zoom 1 High High Low Input Video Signal Of Central 176 Lines Are Display In Full Screen.(Vertically Extension) Input Video Signals Are Displayed In Full Screen. (Horizontal Modification) Wide Low High Low Normal Left High Low High Input Video Signals Are Display In the Left Screen. (4:3 Aspect Ratio) Normal Right Low High High Input Video Signals Are Display In the Right Screen. (4:3 Aspect Ratio) Input Video Signal Of Zoom 2 Low Low High Central 204 Lines Are Display In Full Screen.(Vertically Extension Same As Zoom 2 Mode Vertically Offset Centered Zoom 3 High High High T-51383L070J-FW-P-AA OPTREX CORPORATION Page-5/22 6 Absolute Maximum Ratings: The followings are maximum values , which if exceeded, may cause faulty operation or damage to the unit. Parameter Supply Voltage For Source Driver Symbol VCC VDD VGH- VGL Supply Voltage For Gate Driver H Level VGH L Level Analog Signal Input Level Digital Input Signals Digital Output Signals Storage Temperature Operation Temperature VGL VR,VG,VB MIN. -0.5 -0.5 -0.3 0 -20 -0.3 -0.3 -0.3 -30 -20 MAX. 7 7 40 40 0 7.0 5.5 5.5 +80 +70 Note 6-2 Unit V V V V V V V V Note 6-1 Remark Notes:6-1 Analog Input Voltage means VR,VG,VB. Notes:6-2 Operating Temperature define that contrast, response time, other display optical character are Ta=+25. 7 Electrical Characteristics 7-1) Recommended Driving condition for TFT-LCD panel Parameter Supply Voltage For Source Driver Supply Voltage For Gate Driver Supply Voltage For controller Analog Signal input Level Digital input voltage Digital output voltage Amplitude H level L level H level L level Analog Logic H level L level Symbol MIN. VCC VDD VGH VGL VDD VIN VIL VOH VOL 4.5 4.5 +15 -16 4.5 0.3 0.7 V -0.3 0.7 V -0.3 Typ 5.0 5.0 +17 -15 5.0 - MAX 5.5 5.5 +19 -14 5.5 VCC-0.3 VDD 0.3 VDD VDD 0.3 VDD Unit V V V V V V V V V V Remark 7-2) Backlight driving & Power Consumption Pin No 1 2 3 Symbol VL1 NC VL2 Description Input terminal (Hi voltage side) No Connection Input terminal (Low voltage side) Remark Wire color: pink Wire color: white Note 7-1 T-51383L070J-FW-P-AA OPTREX CORPORATION Page-6/22 Note 7-1 Low voltage side of backlight inverter connects with Ground of inverter circuits. Recommended Driving condition for backlight Parameter Symbol Min. Lamp voltage VL Lamp current IL 4.5 Lamp frequency PL 35 Vs TBD ) Kick-off voltage(25 Vs TBD Kick-off voltage(0 ) Ta= 25 Remark IL=6mA Note 7-2 Note 7-3 Note 7-3 Typ. 810 6 TBD TBD Max. 7 60 1095 1340 Unit Vrms mA KHz Vrms Vrms Note 7-2 : The waveform of lamp driving voltage should be as closed to a perfect sine wave as possible. Note 7-3 : The Kick-off times 1sec. Power Consumption Parameter Supply current for Gate Driver (Hi level) Supply current for Source Driver Supply current for controller LCD Panel Power Consumption Backlight Lamp Power Consumption Ta= 25 MAX Unit Remark 0.2 mA 50 30 30 mA mA mA W W Note 7-4 Note 7-5 Symbol Conditions IGH +17V VGH Supply current for Gate Driver (Low level) IGL VGL -15V ICC IDD VCC VDD +5V +5V TYP. 0.15 20 20 20 0.50 4.86 Note 7-4 The power consumption for backlight is not included. Note 7-5 Backlight lamp power consumption is calculated by IL VL. 7-4) Input / Output Connector A) LCD Module Connector The interface connector is 6210-30p Series manufactured by Elco or equivaleut (0.5mm pitch 30pin) B) Backlight Connector, JST BHR-03VS-1. Pin No. 3, Pitch 4 mm 7-5) Pixel Arrangement and Output Interface Pin 1 2 3 1 R R R 2 G G G 3 B B B 4 R R R 5 G G G 6 B B B 1438 1439 1440 R R R G G G B B B 233 R 234 R G G B B R R G G B B R R G G B B T-51383L070J-FW-P-AA OPTREX CORPORATION Page-7/22 7-6)Signal Timing Waveforms Timing Specification [Horizontal] Parameter Horizontal Start Position Horizontal Display Area Symbol HPOS HDIS Condition NTSC 11.35 50.01 PAL 11.54 50.36 Unit usec usec Notes Note7-6 Notes :7-6 1. Sampling start based on the composite sync falling edge. 2. This value is default , if you want to charge ,please contact PVI. [Vertical] Display Mode Paramet er Symbol Condition Full Normal NTSC ODD EVEN Wide Zoom 1 52 315 62 375 176 Zoom 2 38 301 50 363 204 Zoom 3 53 315 62 375 204 Unit Notes 22 286 26 339 234 22 286 26 363 234 Vertical Start Position VPOS PAL Line Note 7-7 ODD EVEN Line Note 7-7 Vertical Display Position VDIS NTSC Line PAL 281 281 210 234 234 Line Notes :7-7 Sampling start line number base on the vertical sync pulse (SYNC). 4.67(4.70)usec SYNC 1.0 Vp-p 3.12(3.32)usec 5V HSY 0V 4.67(4.70)usec 1 Line = 63.56 (64.00)usec +0.7V R,G,B 0V 50.01(50.36)usec Display Area 11.35(11.54)usec Note:7-7 Values in brackets correspond to PAL mode (fH=15.734(15.625)KHZ ). T-51383L070J-FW-P-AA OPTREX CORPORATION Page-8/22 7-7) Display Time Range A) When sync. signal of NTSC system is applied. a) Horizontally 11.35 ~ 61.36 s. b) Vertical 22 ~ 255 H B) When sync. signal of PAL system is applied. a) Horizontally 11.54 ~ 61.9 s b) Vertical 28 ~ 300 H T-51383L070J-FW-P-AA OPTREX CORPORATION Page-9/22 EVEN FIELD ODD FIELD NTSC FIELD 1 ODD FIELD Vin 524 525 1 2 3 4 5 6 7 8 9 10 23 24 25 26 CSY C) NTSC System Timing Reference T-51383L070J-FW-P-AA Tvpo=63.5gS Typ Tvpo Tvo=254gS Typ Tvo Th CMOS output 260 261 262 1 2 3 4 5 6 7 20 21 22 Black White White Black First Line HSY VSY Th=63.5gS Typ FRP 23 258 259 OPTREX CORPORATION RGB Page-10/22 Timing chart of I/O and RGB signal EVEN FIELD FIELD 2 Vin NTSC 262 263 264 265 266 267 268 269 270 271 272 285 286 287 288 ODD FIELD EVEN FIELD T-51383L070J-FW-P-AA Tvpe=95gS Typ Tvpe Tvo=254gS Typ Tvo 262 263 1 2 3 4 5 6 19 20 21 22 Black White Black White First line CSY HSY VSY FRP OPTREX CORPORATION 259 260 261 RGB Page-11/22 Timing chart of I/O and RGB signal EVEN FIELD ODD FIELD FIELD 1 ODD FIELD Vin PAL 622 21 22 623 624 625 1 2 3 4 5 6 7 23 24 25 26 27 28 D) PAL System Timing Reference T-51383L070J-FW-P-AA Tvpo=64gS Typ Tvpo Tvo=318gS Typ Tvo CMOS output Th=63.5gS Typ Th 1 2 3 4 5 6 7 21 22 23 24 25 26 27 28 Black Black White White First Line CSY HSY VSY FRP 310 311 312 313 OPTREX CORPORATION RGB Timing chart of I/O and RGB signal Page-12/22 309 335 310 311 312 313 314 315 316 317 318 336 337 338 339 340 341 ODD FIELD EVEN FIELD T-51383L070J-FW-P-AA Tvpe=32gS Typ Tvo=318gS Typ Tvpe Tvo 310 311 312 1 2 3 4 5 22 23 24 25 26 27 White Black White White Black CSY HSY VSY FRP 28 29 308 309 Black RGB OPTREX CORPORATION White First line Timing chart of I/O and RGB signal Page-13/22 EVEN FIELD ODD FIELD NTSC FIELD 1 ODD FIELD Vin 524 525 1 2 3 4 5 6 7 8 9 10 23 24 25 26 E) Display Timing (NTSC) T-51383L070J-FW-P-AA Tvpo=63.5gS Typ Tvpo Tvo=254gS Typ Tvo Th CMOS output 261 262 1 2 3 4 5 6 7 20 21 22 23 Black White White Black First Line CSY HSY VSY Th=63.5gS Typ FRP 258 259 260 OPTREX CORPORATION RGB Page-14/22 Timing chart of I/O and RGB signal 64s (1) Horizontal Timing Sampling Clock: 9.53MHz Tho=4.7s 50.36 s 11.54s 2.1s F) Display Timing (PAL) (2) Vertical Timing 50.36/64=79% Display Time T-51383L070J-FW-P-AA ODD FIELD FIELD 1 1 2 3 4 5 6 7 22 23 24 25 Tvpo=1H Typ Tvpo Tvo=5H Typ Tvo EVEN FIELD FIELD 2 313 314 315 316 317 318 333 334 335 336 33 7 338 339 Tvpe=0.5H Typ Tvo=5H Typ Tvpe Tvo EVEN FIELD ODD FIELD Vin PAL 622 623 624 625 VSY Vin PAL OPTREX CORPORATION 28H 309 310 311 312 ODD FIELD EVEN FIELD VSY Not Display Time 79.4/317.5=25% Display Time 234/317.5=75% 234 H 8.5H Page-15/22 28.5H First Line 8.Power Sequence 1) 10ms 2) 10ms T1 T2 T3 T4 T5 T6 T-51383L070J-FW-P-AA OPTREX CORPORATION Page-16/22 9.Optical Characteristics 9-1) Specification: Parameter Viewing Angle Horizontal Vertical Symbol 21, 12 11 CR Tr Tf 350 x y +25 10,000 400 0.285 0.295 22 CR 10 Conditio n MIN. 45 10 30 70 =0 TYP. 55 15 35 150 30 50 ms ms cd/ MAX. Unit Ta = 25 Remarks deg Note 9-1 deg Note 9-1 deg Note 9-1 Note 9-2 Note 9-4 Note 9-3 Note 9-3 Contrast Ratio Response time Rise Fall Brightness White Chromaticity Lamp Life Time hr Note 9-1: The definitions of viewing angles T-51383L070J-FW-P-AA OPTREX CORPORATION Page-17/22 Note 9-2 CR Luminance when Testing point is White Luminance when Testing point is Black (Testing configuration see 8-2 ) Contrast Ratio is measured in optimum common electrode voltage. field of view is used in the testing (after Note 9-3 Topcon BM-7(fast) luminance meter 2 20~30 minutes operation). Lamp Current 6mA Note 9-4: The definition of response time: White 100% 90% Brightness 10% 0% Tr Black White Tf T-51383L070J-FW-P-AA OPTREX CORPORATION Page-18/22 9-2) Testing configuration BM-7(fast) Caution: 1. Environmental illumination 1 lux 2. Before test CR, Vcom voltage must be adjusted carefully to get the best 500mm CR. R,G,B signal input LCD Backlight Pattern generator LCD Display Testing Point Testing Point Pattern A R, G, B Waveform of Pattern A at Testing Point 16ms 16ms Pattern B RGB waveform Vcom R, G, B Waveform of Pattern B at Testing Point 16ms 16ms RGB waveform Vcom T-51383L070J-FW-P-AA OPTREX CORPORATION Page-19/22 10. Handling Cautions 10-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Please connect the ground pattern of the inverter circute surely. If the connection is not perfect, some following problems may happen possibly. 1.The noise from the backlight unit will increase. 2.The output from inverter circuit will be unstable. 3.In some cases a part of module will heat. c) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. d) Protective film (Laminator) is applied on surface to protect it against scratches and dirts. It is recommended to peel off the laminator before use and taking care of static electricity. 10-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 10-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 10-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many Hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel.Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module. T-51383L070J-FW-P-AA OPTREX CORPORATION Page-20/22 11. Reliability Test No 1 2 3 4 5 6 Test Item Ta = +80 Ta = +70 Ta = -20 Test , 240 hrs , 240 hrs , 240 hrs Ta = -30 , 240 hrs Condition High Temperature Storage Test Low Temperature Storage Test High Temperature Operation Test Low Temperature Operation Test High Temperature & High Humidity Operation Test Thermal Cycling Test (non-operating) Vibration Test (non-operating) Ta = +60 , 95%RH, 240 hrs -25 +25 30 min +70 , 200 Cycles 5min 30 min Frequency 10 ~ 55 HZ 7 Amplitude 1.5 mm Sweep time: 11 mins Test Period: 6 Cycles for each direction of X, Y, Z 8 Shock Test (non-operating) Electrostatic Discharge Test (non-operating) Ta: ambient temperature 100G, 6ms Direction: 150pF, 330 Air: 15KV; Contact: 8KV 10 times/point, 9 points/panel face X, Y, Z Cycle: 3 times 9 [Criteria] Under the display quality test conditions with normal operation state, there should be no change which may affect practical display function. T-51383L070J-FW-P-AA OPTREX CORPORATION Page-21/22 11. Block Diagram T-51383L070J-FW-P-AA OPTREX CORPORATION Page-22/22 |
Price & Availability of T-51383070J-FWPAA |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |