 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| New Product SI7145DP www..com Vishay Siliconix P-Channel 30-V (D-S) MOSFET FEATURES ID (A) - 60d - 60d Qg (Typ.) 129 nC PRODUCT SUMMARY VDS (V) - 30 RDS(on) () 0.0026 at VGS = - 10 V 0.00375 at VGS = - 4.5 V PowerPAK SO-8 * Halogen-free According to IEC 61249-2-21 Definition * TrenchFET(R) Power MOSFET * 100 % Rg Tested * 100 % UIS Tested * Compliant to RoHS Directive 2002/95/EC APPLICATIONS 6.15 mm S 1 2 3 4 D 8 7 6 5 D D D S S G S 5.15 mm * Adaptor Switch - Notebook Computers G Bottom View D P-Channel MOSFET Ordering Information: SI7145DP-T1-GE3 (Lead (Pb)-free and Halogen-free) ABSOLUTE MAXIMUM RATINGS TA = 25 C, unless otherwise noted Parameter Drain-Source Voltage Gate-Source Voltage TC = 25 C TC = 70 C TA = 25 C TA = 70 C TC = 25 C TA = 25 C L = 0.1 mH TC = 25 C TC = 70 C TA = 25 C TA = 70 C Symbol VDS VGS Limit - 30 20 - 60d - 36.5a, b - 29.2a, b - 100 - 60d - 5.6a, b - 50 125 104 66.6 6.25a, b 4.0a, b - 55 to 150 260 60d Unit V Continuous Drain Current (TJ = 150 C) ID Pulsed Drain Current Continuous Source-Drain Diode Current Avalanche Current Single-Pulse Avalanche Energy IDM IS IAS EAS A mJ Maximum Power Dissipation PD W Operating Junction and Storage Temperature Range Soldering Recommendations (Peak Temperature)e, f TJ, Tstg C THERMAL RESISTANCE RATINGS Parameter Maximum Junction-to-Ambienta, c Maximum Junction-to-Case t 10 s Steady State Symbol RthJA RthJC Typical 15 0.9 Maximum 20 1.2 Unit C/W Notes: a. Surface mounted on 1" x 1" FR4 board. b. t = 10 s. c. Maximum under Steady State conditions is 54 C/W. d. Package limited. e. See Solder Profile (www.vishay.com/doc?73257). The PowerPAK SO-8 is a leadless package. The end of the lead terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper tip cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection. f. Rework Conditions: manual soldering with a soldering iron is not recommended for leadless components. Document Number: 64814 S09-0872-Rev. A, 18-May-09 www.vishay.com 1 New Product SI7145DP www..com Vishay Siliconix SPECIFICATIONS TJ = 25 C, unless otherwise noted Parameter Static Drain-Source Breakdown Voltage VDS Temperature Coefficient VGS(th) Temperature Coefficient Gate-Source Threshold Voltage Gate-Source Leakage Zero Gate Voltage Drain Current On-State Drain Currenta Drain-Source On-State Resistancea Forward Transconductancea Dynamicb Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge Gate-Source Charge Gate-Drain Charge Gate Resistance Turn-On Delay Time Rise Time Turn-Off DelayTime Fall Time Turn-On Delay Time Rise Time Turn-Off DelayTime Fall Time Drain-Source Body Diode Characteristics Continous Source-Drain Diode Current Pulse Diode Forward Current Body Diode Voltage Body Diode Reverse Recovery Time Body Diode Reverse Recovery Charge Reverse Recovery Fall Time Reverse Recovery Rise Time IS ISM VSD trr Qrr ta tb IF = - 10 A, dI/dt = 100 A/s, TJ = 25 C IS = - 5 A, VGS = 0 V - 0.69 42 44 20 22 TC = 25 C - 60 - 100 - 1.1 80 84 A V ns nC ns VDS VDS/TJ VGS(th)/TJ VGS(th) IGSS IDSS ID(on) RDS(on) gfs Ciss Coss Crss Qg Qgs Qgd Rg td(on) tr td(off) tf td(on) tr td(off) tf VDD = - 15 V, RL = 1.5 ID - 10 A, VGEN = - 4.5 V, Rg = 1 VDD = - 15 V, RL = 1.5 ID - 10 A, VGEN = - 10 V, Rg = 1 f = 1 MHz 0.4 VDS = - 15 V, VGS = - 10 V, ID = - 20 A VDS = - 15 V, VGS = - 4.5 V, ID = - 20 A VDS = - 15 V, VGS = 0 V, f = 1 MHz VGS = 0 V, ID = - 250 A ID = - 250 A VDS = VGS, ID = - 250 A VDS = 0 V, VGS = 20 V VDS = - 30 V, VGS = 0 V VDS = - 30 V, VGS = 0 V, TJ = 55 C VDS - 10 V, VGS = - 10 V VGS = - 10 V, ID = - 25 A VGS = - 4.5 V, ID = - 20 A VDS = - 10 V, ID = - 25 A - 40 0.0021 0.0030 110 15 660 1335 1570 275 129 37 40 1.6 27 13 130 27 125 110 107 43 3.2 50 26 220 50 210 190 180 80 ns 413 194 nC pF 0.0026 0.00375 - 1.0 - 30 - 18 5.1 - 2.3 100 -1 -5 V mV/C V nA A A S Symbol Test Conditions Min. Typ. Max. Unit Notes: a. Pulse test; pulse width 300 s, duty cycle 2 %. b. Guaranteed by design, not subject to production testing. Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. www.vishay.com 2 Document Number: 64814 S09-0872-Rev. A, 18-May-09 New Product SI7145DP www..com Vishay Siliconix TYPICAL CHARACTERISTICS 25 C, unless otherwise noted 100 VGS = 3 V VGS = 10 V thru 4 V 80 I D - Drain Current (A) I D - Drain Current (A) 8 10 60 6 40 4 TC = 25 C 2 TC = 125 C TC = - 55 C 20 0 0.0 0.5 1.0 1.5 2.0 2.5 0 0.0 0.8 1.6 2.4 3.2 4.0 VDS - Drain-to-Source Voltage (V) VGS - Gate-to-Source Voltage (V) Output Characteristics 0.0035 VGS = 4.5 V R DS(on) - On-Resistance () 0.0031 C - Capacitance (pF) 20 000 Transfer Characteristics Ciss 16 000 0.0027 12 000 0.0023 VGS = 10 V 8000 0.0019 4000 Crss Coss 0.0015 0 16 32 48 64 80 0 0 6 12 18 24 30 ID - Drain Current (A) VDS - Drain-to-Source Voltage (V) On-Resistance vs. Drain Current 10 ID = 20 A VGS - Gate-to-Source Voltage (V) 8 R DS(on) - On-Resistance 1.3 1.5 ID = 25 A Capacitance VGS = 10 V (Normalized) 1.1 VGS = 4.5 V 0.9 6 VDS = 15 V VDS = 10 V 4 VDS = 20 V 2 0.7 0 0 60 120 180 240 300 0.5 - 50 - 25 0 25 50 75 100 125 150 Qg - Total Gate Charge (nC) TJ - Junction Temperature (C) Gate Charge Document Number: 64814 S09-0872-Rev. A, 18-May-09 On-Resistance vs. Junction Temperature www.vishay.com 3 New Product SI7145DP www..com Vishay Siliconix TYPICAL CHARACTERISTICS 25 C, unless otherwise noted 100 TJ = 150 C R DS(on) - On-Resistance () 10 I S - Source Current (A) TJ = 25 C 1 0.012 0.015 ID = 25 A 0.009 0.1 0.006 TJ = 125 C 0.003 TJ = 25 C 0.01 0.001 0.0 0.000 0.2 0.4 0.6 0.8 1.0 1.2 0 1 2 3 4 5 6 7 8 9 10 VSD - Source-to-Drain Voltage (V) VGS - Gate-to-Source Voltage (V) Source-Drain Diode Forward Voltage 0.8 200 On-Resistance vs. Gate-to-Source Voltage 160 0.5 VGS(th) Variance (V) ID = 250 A Power (W) 120 ID = 5 mA 0.2 80 - 0.1 40 - 0.4 - 50 0 - 25 0 25 50 75 100 125 150 0.001 0.01 0.1 Time (s) 1 10 TJ - Temperature (C) Threshold Voltage 100 Limited by RDS(on)* Single Pulse Power, Junction-to-Ambient 1 ms 10 I D - Drain Current (A) 10 ms 100 ms 1s 10 s 0.1 TA = 25 C Single Pulse 0.01 0.01 BVDSS Limited DC 1 0.1 1 10 100 VDS - Drain-to-Source Voltage (V) * VGS > minimum VGS at which RDS(on) is specified Safe Operating Area www.vishay.com 4 Document Number: 64814 S09-0872-Rev. A, 18-May-09 New Product SI7145DP www..com Vishay Siliconix MOSFET TYPICAL CHARACTERISTICS 25 C, unless otherwise noted 180 144 I D - Drain Current (A) 108 72 Package Limited 36 0 0 25 50 75 100 125 150 TC - Case Temperature (C) Current Derating* 125 3.0 100 2.4 Power (W) Power (W) 75 1.8 50 1.2 25 0.6 0 0 25 50 75 100 125 150 0.0 0 25 50 75 100 125 150 TC - Case Temperature (C) TA - Ambient Temperature (C) Power, Junction-to-Case Power Derating, Junction-to-Ambient * The power dissipation PD is based on TJ(max) = 150 C, using junction-to-case thermal resistance, and is more useful in settling the upper dissipation limit for cases where additional heatsinking is used. It is used to determine the current rating, when this rating falls below the package limit. Document Number: 64814 S09-0872-Rev. A, 18-May-09 www.vishay.com 5 New Product SI7145DP www..com Vishay Siliconix TYPICAL CHARACTERISTICS 25 C, unless otherwise noted 1 Duty Cycle = 0.5 Normalized Effective Transient Thermal Impedance 0.2 0.1 0.1 0.05 t1 t2 1. Duty Cycle, D = t1 t2 Notes: PDM 0.02 Single Pulse 0.01 10 -4 10 -3 10 -2 10 -1 1 Square Wave Pulse Duration (s) 10 2. Per Unit Base = RthJA = 54 C/W 3. TJM - TA = PDMZthJA(t) 4. Surface Mounted 100 1000 Normalized Thermal Transient Impedance, Junction-to-Ambient 1 Duty Cycle = 0.5 Normalized Effective Transient Thermal Impedance 0.2 0.1 0.1 0.02 Single Pulse 0.05 0.01 10 -4 10 -3 10 -2 10 -1 Square Wave Pulse Duration (s) 1 10 Normalized Thermal Transient Impedance, Junction-to-Case Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?64814. www.vishay.com 6 Document Number: 64814 S09-0872-Rev. A, 18-May-09 Legal Disclaimer Notice www..com Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of SI7145DP
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |