 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Filename: tfs 456q.doc Version 1.2 08.12.2006 VI TELEFILTER Measurement condition Ambient temperature: Input power level: Terminating impedance: * Input: Output: 23 0 C dBm Filter specification TFS 456Q 1/5 264 || -6,6 pF 300 || -5,7 pF Characteristics Remark: Reference level for the relative attenuation arel of the TFS 456Q is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined as the insertion loss ae. The centre frequency fC is the arithmetic mean value of the upper and lower frequencies at the 1dB filter attenuation level relative to the insertion loss ae. The nominal frequency fN is fixed at 456,0 MHz without tolerance. The given values for the relative attenuation arel and for the group delay ripple have to be reached at the frequencies given below even if the centre frequency fC is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fC. Data Insertion loss (reference level) Nominal frequency Centre frequency Passband Pass band ripple 1 dB bandwidth ae = amin typ. value 10 456 14 0,2 14 14 MHz MHz dB MHz MHz dB tolerance / limit max. 13,0 456,0 dB MHz fN fC PB min. max. min. max. fN 6,3 1,0 12,6 14,6 MHz dB MHz MHz Relative attenuation fN fN fN fN fN fN + + 455 200 104 47 14 200 MHz MHz MHz MHz MHz MHz ... ... ... ... ... ... fN fN fN fN fN fN + + 200 104 47 14 200 400 arel MHz MHz MHz MHz MHz MHz 70 65 55 50 50 70 40 15 OTR TCf ** -18 ppm/k dB dB dB dB dB dB ns dB min. min. min. min. min. min. max. min. max. 30 40 50 40 40 30 200 10 15 dB dB dB dB dB dB ns dB dBm Group delay ripple within PB Return loss within PB Input power level Operating temperature range Storage temperature range Temperature coefficient of frequency - 40 C ... + 85C - 45 C ... + 85C - *) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team. **) fc(Hz) = TCf(ppm/K) x (T - To) x fTo (MHz). Generated: Checked / Approved: Tele Filter GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 456q.doc Version 1.2 08.12.2006 VI TELEFILTER Filter characteristic 0 Filter specification TFS 456Q 2/5 0 1.75 -8 -1 1.6 -16 -2 1.45 -24 -3 1.3 magnitude in dB magnitude in dB -32 -4 1.15 delay in s -40 -5 1 -48 -6 0.85 -56 -7 0.7 -64 -8 0.55 -72 -9 0.4 -80 396 408 420 432 444 456 468 frequency in MHz 480 492 504 516 -10 447 448.8 450.6 452.4 454.2 456 457.8 frequency in MHz 459.6 461.4 463.2 0.25 465 Construction and pin connection (All dimensions in mm) 7 5 456Q U49 1 3 1 2 3 4 5 6 7 8 Date code Ground Input RF Return Input Ground Ground Output RF Return Output Ground 2,54 1 3 1,2 Max. SQ 3,81 +0,2/-0,1 Date code: U V W ... Year + week 2006 2007 2008 12 0% % d 7 1,78 5 50 Ohm Test circuit 0,1 1,78 0,6 L1 3 2 7 L2 SAW 6 C2 C1 1, 4, 5, 8 Tele Filter GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 456q.doc Version 1.2 08.12.2006 VI TELEFILTER Stability characteristics, reliability Filter specification TFS 456Q 3/5 After the following tests the filter shall meet the whole specification: 1. Shock: 2. Vibration: 3. Change of temperature: 4. Resistance to solder heat (reflow): 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 -55 C to 125C / 30 min. each / 10 cycles DIN IEC 68 part 2 - 14 Test N reflow possible: three times max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; This filter is RoHS compliant (2002/95/EG, 2005/618/EG) Packing Tape & Reel: IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer: Pull Off Direction 3000 min. 300 mm min. 500 mm min. 300 mm Tape (all dimensions in mm) W : 12,00 0,3 Po : 4,00 0,1 Do : 1,50 +0,1/-0 E : 1,75 0,1 F : 5,50 0,05 G(min) : 0,75 P2 : 2,00 0,05 P1 : 8,00 0,1 D1(min) : 1,50 Ao : 4,30 0,1 Bo : 4,30 0,1 Ct : 9,5 0,1 P1 t Do PIN Marker Po P2 E G Ct Bo F Ko Date Code Typ D1 Ao W2 Reel (all dimensions in mm) A : 330 W1 : 12,4 +2/-0 W2(max) : 18,4 N(min) : 50 C : 13,0 +0,5/-0,2 C A N W1 The minimum bending radius is 45 mm. Tele Filter GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. G W Filename: tfs 456q.doc Version 1.2 08.12.2006 VI TELEFILTER Air reflow temperature conditions Filter specification TFS 456Q 4/5 Conditions Average ramp-up rate (30C to 217C) > 100C > 150C > 217C Peak temperature Time within 5C of actual peak temperature Cool-down rate (Peak to 50C) Time from 30C to Peak temperature Exposure less than 3C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260C between 10 and 30 seconds less than 6C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / C max. 260C 217C max. 300 s 10 ... 30 s 30 ... 150 s Time / s Tele Filter GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 456q.doc Version 1.2 08.12.2006 VI TELEFILTER History Version 1.0 Filter specification TFS 456Q 5/5 Reason of Changes - generation of filter specification - added termination impedances - added typical values - added filter characteristic - added test circuit - changed typical values - changed filter characteristic - changed termination impedances - add input power level Name E. Chilla Date 15.12.2005 1.1 E. Chilla 03.04.2006 1.2 Strehl 08.12.2006 Tele Filter GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. |
Price & Availability of TFS456Q
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |