View LA38B-86-RGY-1-PF_5051996.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
LED ARRAY
Pb
Lead-Free Parts
LA38B-86/RGY-1-PF
DATA SHEET
DOC. NO : REV. DATE : :
QW0905-LA 38B-86/RGY-1-PF A 04 - May - 2007
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LA38B-86/RGY-1-PF Page 1/7
Package Dimensions
5.0 5.9
7.6
8.6
7.5
5.8
25.0MIN
0.5 TYP 1 234
1.0MIN 4-1.27TYP
1.CATHODE RED 2.COMMON ANODE 3.CATHODE YELLOW 4.CATHODE GREEN
1.0MIN 1.0MIN
LRGY3393-A/NP
5.0 5.9
7.6
8.6
1.5MAX
25.0MIN
0.5 TYP 1 234
1.0MIN 4-1.27TYP
1.CATHODE RED 2.COMMON ANODE 3.CATHODE YELLOW 4.CATHODE GREEN
1.0MIN 1.0MIN
Note : 1.All dimension are in millimeter tolerance is 0.25mm unless otherwise noted. 2.Specifications are subject to change without notice.
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LA38B-86/RGY-1-PF Page 2/7
Absolute Maximum Ratings at Ta=25
Ratings Parameter Symbol UR Forward Current Peak Forward Current Duty 1/10@10KHz Power Dissipation Electrostatic Discharge( * ) Reverse Current @5V Operating Temperature Storage Temperature IF IFP PD ESD Ir Topr Tstg 40 120 120 DGM 30 100 120 150 50 -20 ~ +80 -30 ~ +100 UYR 50 90 120 2000 10 mA mA mW V UNIT
---10
A
Static Electricity or power surge will the Use of anti-electrosatic * glove is recommended when handingdamageLED.LED.devices, a conductive wrist band or must be properly these All equipment and machinery grounded.
Typical Electrical & Optical Characteristics (Ta=25 )
PART NO
MATERIAL
COLOR
Peak Dominant Spectral wave halfwidth wave length nm length
Forward voltage @20mA(V)
Pnm
Dnm
Luminous Viewing intensity angle @20mA(mcd) 2 1/2 (deg)
Emitted GaAlAs
LA38B-86/RGY-1-PF
Lens 660 518
Min. Typ. Max. Min. Typ.
Red
---525 590
20 36 20
1.5 ---- 2.4 550 1100 ---- 3.5 4.0 900 1500 1.7 --2.6 900 1500
32 24 24
InGaN/GaN Green Water Clear AlGaInP Yellow
----
Note : 1.The forward voltage data did not including 0.1V testing tolerance. 2. The luminous intensity data did not including 15% testing tolerance.
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LA38B-86/RGY-1-PF Page 3/7
Typical Electro-Optical Characteristics Curve
UR CHIP
Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current
1000
3.0
Forward Current(mA)
100 10 1 01 1.0 2.0 3.0 4.0 5.0
Relative Intensity Normalize @20mA
2.5 2.0 1.5 1.0 0.5 0.0 1 10 100 1000
Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature
1.2
Forward Current(mA) Fig.4 Relative Intensity vs. Temperature
Forward Voltage@20mA Normalize @25
Relative Intensity@20mA Normalize @25
-40 -20 20 40 60 80 100
3.0 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100
1.1
1.0 0.9
0.8 0
Ambient Temperature()
Ambient Temperature()
Fig.5 Relative Intensity vs. Wavelength
Fig.6 Directive Radiation
Relative Intensity@20mA
1.0
0 -30
0.5
30
-60
60
0.0 600 650 700 750
100% 75% 50%
25%
0
25%
50% 75% 100%
Wavelength (nm)
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LA38B-86/RGY-1-PF Page 4/7
Typical Electro-Optical Characteristics Curve
DGM CHIP
Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current
1000
3.0
Forward Current(mA)
100
Relative Intensity Normalize @20mA
1.0 2.0 3.0 4.0 5.0
2.5 2.0 1.5 1.0 0.5 0.0 1.0 10 100 1000
10
1.0
0.1
Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature
1.2
Forward Current(mA) Fig.4 Relative Intensity vs. Temperature
3.0
Forward Voltage@20mA Normalize @25
Relative Intensity@20mA Normalize @25
-40 -20 0 20 40 60 80 100
1.1
2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100
1.0
0.9 0.8
Ambient Temperature()
Ambient Temperature()
Fig.5 Relative Intensity vs. Wavelength
1.0
Fig.6 Directive Radiation
Relative Intensity@20mA
0 -30
0.5
30
-60
60
0.0 450 500 550 600
100% 75% 50%
25%
0
25%
50% 75% 100%
Wavelength (nm)
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LA38B-86/RGY-1-PF Page 5/7
Typical Electro-Optical Characteristics Curve
UYR CHIP
Fig.1 Forward current vs. Forward Voltage Fig.2 Luminous Intensity vs. Forward Current
Forward Current(mA)
150
5.0
Luminous Intensity Normalize @20mA
4.0 3.0 2.0 1.0 0.0 0 50 100 150
100
50
0 0 0.5 1.0 1.5 2.0 2.5 3.0
Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature
Forward Current(mA) Fig.4 Luminous Intensity vs. Temperature
1.06 1.04 1.02 1.00 0.98 0.96 0.94 -40 -20 0 20 40 60 80 100
Luminous Intensity@20mA Normalize @25
Forward Voltage@20mA Normalize @25
1.5
1.0
0.5
0.0 -40 -20 0 20 40 60 80 100
Ambient Temperature()
Ambient Temperature()
Fig.5 Relative Intensity vs. Wavelength
1.0
Fig.6 Directive Radiation
Relative Intensity@20mA
0 -30 30
0.5
-60
60
0.0 500 550 600 650
100% 75% 50%
25%
0
25%
50% 75% 100%
Wavelength (nm)
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LA38B-86/RGY-1-PF Page 6/7
Soldering Condition(Pb-Free) 1.Iron: Soldering Iron:30W Max Temperature 350C Max Soldering Time:3 Seconds Max(One time only) Distance:2mm Min(From solder joint to case)
2.Wave Soldering Profile Dip Soldering Preheat: 120C Max Preheat time: 60seconds Max Ramp-up 2 C/sec(max) Ramp-Down:-5C/sec(max) Solder Bath:260C Max Dipping Time:3 seconds Max Distance:2mm Min(From solder joint to case)
Temp( C) 260 C3sec Max
260
5 /sec max
120
2 /sec max Preheat 60 Seconds Max
25 0 0
50
100
150
Time(sec)
Note: 1.Wave solder should not be made more than one time. 2.You can just only select one of the soldering conditions as above.
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LA38B-86/RGY-1-PF Page 7/7
Reliability Test:
Test Item
Test Condition
1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs)
Description
This test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed.
Reference Standard
MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1
Operating Life Test
High Temperature Storage Test
1.Ta=105 5 2.t=1000 hrs (-24hrs, +72hrs)
The purpose of this is the resistance of the device which is laid under condition of high temperature for hours.
MIL-STD-883:1008 JIS C 7021: B-10
Low Temperature Storage Test
1.Ta=-40 5 2.t=1000 hrs (-24hrs, +72hrs)
The purpose of this is the resistance of the device which is laid under condition of low temperature for hours.
JIS C 7021: B-12
High Temperature High Humidity Test
1.Ta=65 5 2.RH=90 %~95% 3.t=240hrs 2hrs
The purpose of this test is the resistance of the device under tropical for hours.
MIL-STD-202:103B JIS C 7021: B-11
Thermal Shock Test
1.Ta=105 5&-405 (10min) (10min) 2.total 10 cycles
The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire.
MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011
Solder Resistance Test
1.T.Sol=260 5 2.Dwell time= 10 1sec.
MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1
Solderability Test
1.T.Sol=230 5 2.Dwell time=5 1sec
This test intended to see soldering well performed or not.
MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2

▲Up To Search▲

Price & Availability of LA38B-86-RGY-1-PF

	To Download LA38B-86-RGY-1-PF Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .