 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| VSKL300-08PBF Vishay High Power Products INT-A-PAK Power Module Thyristor/Diode, 300 A FEATURES * Electrically isolated base plate * 3000 VRMS isolating voltage * Industrial standard package * Simplified mechanical designs, rapid assembly * High surge capability * Large creepage distances * Totally lead (Pb)-free INT-A-PAK RoHS COMPLIANT APPLICATIONS * Battery chargers PRODUCT SUMMARY IT(AV) 300 A * Welders * Power converters * Alternators MAJOR RATINGS AND CHARACTERISTICS SYMBOL VRRM/VDRM IT(AV) CHARACTERISTICS VALUES 800 300 TC 50 Hz 60 Hz 50 Hz 60 Hz 53 6500 6900 214 195 2140 Range - 40 to 140 UNITS V A C A ITSM I2 t I2t TJ kA2s kA2s C ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VRRM/VDRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V 800 VRSM/VDSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V 900 IRRM/IDRM AT 125 C mA 50 VSKL300-08PBF Document Number: 94557 Revision: 29-Sep-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 1 VSKL300-08PBF Vishay High Power Products INT-A-PAK Power Module Thyristor/Diode, 300 A ON-STATE CONDUCTION PARAMETER Maximum average on-state current at case temperature Maximum RMS on-state current Maximum peak, one-cycle on-state, non-repetitive surge current SYMBOL IT(AV) IT(RMS) TEST CONDITIONS 180 conduction half sine wave As AC switch t = 10 ms ITSM t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms Maximum I2t for fusing I2t t = 8.3 ms t = 10 ms t = 8.3 ms Maximum I2t for fusing I2t VT(TO)1 VT(TO)2 rt1 rt2 SCR DIODE VTM VFM No voltage reapplied 100 % VRRM reapplied No voltage reapplied 100 % VRRM reapplied Sine half wave, initial TJ = TJ maximum VALUES 300 53 116 6600 6900 5500 5800 214 195 151 138 2140 0.796 0.868 0.972 m (I > x IT(AV)), TJ maximum TJ = 25 C, 500 A Ipk 0.88 1.35 1.20 V kA2s V kA2s A UNITS A C t = 0.1 to 10 ms, no voltage reapplied (16.7 % x x IT(AV) < I < x IT(AV)), TJ maximum (I > x IT(AV)), TJ maximum (16.7 % x x IT(AV) < I < x IT(AV)), TJ maximum Low level value of threshold voltage High level value of threshold voltage Low level value on-state slope resistance High level value on-state slope resistance Maximum on-state voltage drop SWITCHING PARAMETER Typical delay time Typical turn-off time SYMBOL td tq TEST CONDITIONS Gate current 1 A, dIg/dt = 1 A/s Vd = 0.67 % VDRM, TJ = 25 C ITM = 300 A, TJ = TJ maximum, dI/dt = 20 A/s, VR = 50 V dV/dt = 20 V/s, Gate 0 V 100 , tp = 500 s VALUES 1.0 s 100 UNITS BLOCKING PARAMETER Maximum critical rate of rise of off-state voltage Maximum peak reverse and off-state leakage current RMS insulation voltage SYMBOL dV/dt IDRM, IRRM VINS TEST CONDITIONS TJ = TJ maximum linear to 67 % rated VDRM TJ = TJ maximum, rated VDRM/VRRM applied 50 Hz, circuit to base, all terminal shorted, t = 1 s VALUES 500 50 3000 UNITS V/s mA V www.vishay.com 2 For technical questions, contact: ind-modules@vishay.com Document Number: 94557 Revision: 29-Sep-08 VSKL300-08PBF INT-A-PAK Power Module Thyristor/Diode, 300 A TRIGGERING PARAMETER Maximum peak gate power Maximum average gate power Maximum peak positive gate current Maximum required DC gate voltage to trigger Maximum required DC gate current to trigger Maximum holding current Maximum peak positive gate voltage Maximum peak negative gate voltage DC gate voltage not to trigger DC gate current not to trigger Maximum non-repetitive rate of rise of turned-on current SYMBOL PGM PG(AV) IGM VGT IGT IH +VGM -VGM VGD IGD dI/dt TJ = TJ maximum, tp 5 ms TJ = TJ maximum Maximum gate current/voltage not to trigger is the maximum value which will not trigger any unit with rated VDRM anode to cathode applied Gate drive 20 V, 20 , tr 1 s TJ = TJ maximum, anode voltage 80 % VDRM TJ = 25 C Anode supply: 12 V resistive load TEST CONDITIONS TJ = TJ maximum, tp 5 ms TJ = TJ maximum, f = 50 Hz, d% = 50 TJ = TJ maximum, tp 5 ms VALUES 10.0 2.0 3.0 3 200 600 20 5.0 0.30 10 UNITS W A V mA Vishay High Power Products V V mA 1000 A/s THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER Maximum junction operating temperature range Maximum storage temperature range Maximum thermal resistance, junction to case per junction Maximum thermal resistance, case to heatsink per module Mounting torque 100 % Approximate weight Case style IAP to heatsink busbar to IAP SYMBOL TJ TStg RthJC RthCS DC operation Mounting surface smooth, flat and greased A mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound. Lubricated threads. TEST CONDITIONS VALUES - 40 to 140 - 40 to 150 0.19 K/W 0.035 4 to 6 500 17.8 INT-A-PAK Nm g oz. UNITS C R CONDUCTION PER JUNCTION DEVICES 180 VSKL300 0.019 SINUSOIDAL CONDUCTION AT TJ MAXIMUM 120 0.022 90 0.028 60 0.041 30 0.068 180 0.013 RECTANGULAR CONDUCTION AT TJ MAXIMUM 120 0.023 90 0.031 60 0.043 30 0.069 K/W UNITS Note * Table shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC Document Number: 94557 Revision: 29-Sep-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 3 VSKL300-08PBF Vishay High Power Products INT-A-PAK Power Module Thyristor/Diode, 300 A Maximum Allowable Case Temperature (C) 150 Maximum Average On-state Power Loss (W) 600 500 400 RMS Limit DC 100 30 Conduction Angle 300 Conduction Period 50 60 90 120 180 200 100 0 0 100 200 300 0 0 50 100 150 200 250 300 350 Average On-state Current (A) 180 120 90 60 30 400 500 Average On-state Current (A) Fig. 1 - Current Ratings Characteristics Fig. 4 - On-State Power Loss Characteristics Maximum Allowable Case Temperature (C) Peak Half Sine Wave On-state Current (A) 150 6000 5500 5000 4500 4000 3500 3000 2500 1 10 100 Number of Equal Amplitude Half Cycle Current Pulsed (N) 100 Maximum Non-repetitive Surge Current Versus Pulse Train Duration Initial Tj = 140C No Voltage Reapplied Rated Vrrm reapplied Conduction Angle 30 50 60 90 120 180 0 0 100 200 300 400 500 Average On-state Current (A) Fig. 2 - Current Ratings Characteristics Fig. 5 - Maximum Non-Repetitive Surge Current Maximum Average On-state Power Loss (W) Peak Half Sine Wave On-state Current (A) 500 6500 6000 5500 5000 4500 4000 3500 3000 2500 2000 0.01 0.1 1 10 Maximum Non-repetitive Surge Current Versus Pulse Train Duration Initial Tj = 140C No Voltage Reapplied Rated Vrrm reapplied 400 RMS Limit 300 200 Conduction Angle 100 0 0 50 180 120 90 60 30 100 150 200 250 300 350 Average On-state Current (A) Pulse Train Durations (s) Fig. 3 - On-State Power Loss Characteristics Fig. 6 - Maximum Non-Repetitive Surge Current www.vishay.com 4 For technical questions, contact: ind-modules@vishay.com Document Number: 94557 Revision: 29-Sep-08 VSKL300-08PBF INT-A-PAK Power Module Thyristor/Diode, 300 A 10000 Instantaneous On-state Current (A) Vishay High Power Products 10000 Instantaneous On-state Current (A) 1000 Tj = 140C 1000 100 100 10 Tj = 25C 1 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Instantaneous On-state Voltage (V) 10 Tj = 140C Tj = 25C 1 0.5 1.0 1.5 2.0 2.5 3.0 Instantaneous On-state Voltage (V) Fig. 7 - On-State Voltage Drop Characteristics - SCR Fig. 8 - On-State Voltage Drop Characteristics - DIODE Transient Thermal Impedance Z thJC (K/W) 1 0.1 0.01 0.001 Single Pulse (Thermal Resistance) 0.0001 1E-04 1E-03 1E-02 1E-01 1E+00 1E+01 1E+02 Square Wave Pulse Duration (s) Fig. 9 - Thermal Impedance ZthJC Characteristics ORDERING INFORMATION TABLE Device code VSK 1 1 2 3 4 5 - L 2 300 3 - 08 4 PbF 5 Module type Circuit configuration (L = SCR/diode doubler negative control) Current rating (300 = 300 A) Voltage rating (08 = 800 V) PbF = Lead (Pb)-free Document Number: 94557 Revision: 29-Sep-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 5 VSKL300-08PBF Vishay High Power Products INT-A-PAK Power Module Thyristor/Diode, 300 A CIRCUIT CONFIGURATION 1 ~ ~ 2 + + 3 K2 G2 LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95010 www.vishay.com 6 For technical questions, contact: ind-modules@vishay.com Document Number: 94557 Revision: 29-Sep-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of VSKL300-08PBF
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |