 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TS63 Vishay Sfernice Multi-Turn Surface Mount Miniature 1/4" Square Cermet Trimmers, Fully Sealed FEATURES * 0.25 W at 85 C * Industrial grade * Multi-turn operation The TS63 multiturn trimmer has been designed for use in PCB surface mounting applications. Three variations are available according to the positioning of the control screw and contact positions. The cermet track gives a high stability performance with an extended ohmic capacity of 10 to 2 M. * A low contact resistance variation (down to 2 % Rn) * Low end contact resistance (1 typical) * Full sealing * Tests according to CECC 41 000 RoHS COMPLIANT DIMENSIONS in millimeters TS63X slot 0.5 x 0.5 5.8 0.10 0.25 5 max RECOMMENDED SOLDERING AREAS 1 1 0.10 c b O 0.45 2.54 2.54 0.20 6.85 max O 1.8 0.7 2.54 c b a 6.85 max 6.7 max 2.54 7.5 TS63Z 6.85 max slot 0.5 x 0.5 3 O 1.8 1.3 0.1 5 max b 9.3 1 0.1 0.25 6.85 max 7.6 max 8.85 max c a O 0.45 5.3 max 2.54 2.54 1 2.54 2.54 TS63Y 2.54 6.85 max c b 1.3 0.1 O 0.45 6.85 max 0.3 2.54 2.54 O 1.8 slot 0.5 x 0.5 5 max c b a 6.85 max 2.54 1 7.5 3 a 1 0.10 6.7 max 8 max CIRCUIT DIAGRAM a (1) b Tolerance unless otherwise specified 0.5 www.vishay.com 30 For technical questions, contact: sfer@vishay.com Document Number: 51011 Revision: 24-Jul-07 cw c (3) TS63 Multi-Turn Surface Mount Miniature 1/4" Square Cermet Trimmers, Fully Sealed ELECTRICAL SPECIFICATIONS Resistive Element Electrical Travel Resistance Range Standard Series Tolerance Power Rating Temperature Coefficient Limiting Element Voltage (Linear Law) Contact Resistance Variation End Resistance (Typical) Dielectric Strength (RMS) Insulation Resistance Standard On request Linear Logarithmic Cermet 13 turns 2 10 to 2 M 1-2-5 10 % 5% 0.25 W at 85 C not applicable See Standard Resistance Element Data 250 V 2 % Rn or 2 1 1000 V 106 M Vishay Sfernice MECHANICAL SPECIFICATIONS Mechanical Travel Operating Torque (max. Ncm) End Stop Torque Unit Weight (max. g) Wiper (actual travel) 15 turns 5 1.5 clutch action 0.5 Positioned at approx. 50 % POWER RATING CHART RATED POWER IN W 0.25 0.125 ENVIRONMENTAL SPECIFICATIONS Temperature Range Climatic Category Sealing - 55 C to + 155 C 55/125/56 sealed container solder immersion IP67 0 0 50 85 100 AMBIENT TEMPERATURE IN C 155 PERFORMANCE CECC 41100 TESTS CONDITIONS Phase A dry heat 125 C Phase B damp heat Phase C cold - 55 C Phase D damp heat 5 cycles 56 days 40 C 93 % RH 200 cycles at rated power 1000 h at rated power 90'/30' - ambient temp. 85 C 5 cycles - 55 C to + 125 C 50 g at 11 ms 3 successive shocks in 3 directions 10 - 55 Hz 0.75 mm or 10 g for 6 hours RT (%) REQUIREMENTS RT R1-2 (%) R1-2 TYPICAL VALUES AND DRIFTS RT (%) RT R1-2 (%) R1-2 Climatic Sequence 2% 3% 0.5 % 1% 2% Dielectric strength: 250 V RMS Insulation resistance: > 100 M 2% Contact res. variat.: < 3 % Rn 2% Contact res. variat.: < 3 % Rn 1.5 % V1-2 V1-3 3% 0.5 % 1% Long Term Damp Heat Rotational Life (Electrical, Mechanical) Load Life Thermal Shock Dielectric strength: 1000 V RMS Insulation resistance: > 104 M (2 % + 3 ) Contact res. variat.: < 1 % Rn 4% 1% 2% Contact res. variat.: < 1 % Rn 0.5 % V1-2 V1-3 <1% 1% Shock 1% V1-2 V1-3 2% 0.1 % V1-2 V1-3 0.2 % Vibration 1% 2% 0.1 % < 0.2 % Document Number: 51011 Revision: 24-Jul-07 For technical questions, contact: sfer@vishay.com www.vishay.com 31 TS63 Vishay Sfernice Multi-Turn Surface Mount Miniature 1/4" Square Cermet Trimmers, Fully Sealed MARKING Printed: VISHAY trademark, model, style, ohmic value (in , k, M), tolerance (in %) only if non standard, manufacturing date, marking of terminal 3. STANDARD RESISTANCE ELEMENT DATA STANDARD RESISTANCE VALUES 10 20 50 100 200 500 1K 2K 5K 10K 20K 25K 50K 100K 200K 250K 500K 1M 2M LINEAR LAW MAX. MAX. MAX. CUR. POWER WORKING THROUGH AT 85 C VOLTAGE WIPER W 0.25 V 1.58 2.23 3.53 5.00 7.07 11.2 15.8 22.3 35.3 50.0 70.7 79.0 112 158 224 250 250 250 250 mA 158 112 77 50 35 22 15.8 11.2 7.1 5.0 3.5 3.2 2.2 1.6 1.1 1.1 0.50 0.25 0.125 TYPICAL TCR - 55 C + 125 C ppm/C SOLDERING RECOMMENDATION Soldering cycle: 10 s at 220 C max or with an 40 W iron: 3 s at 350 C Soldering is recommended by reflow or vapour phase. 100 0.25 0.25 0.13 0.06 0.03 PACKAGING - X, Y and Z types: on tape and reel (Dia. 330 mm) of 500 pieces, code TR500. - On request in magazine pack by 50 pieces (Tube) code TU. Version Z O 13 O 330 22.4 3 16 O 1.5 O 1.5 Version X.Y 4 2 12 O 1.5 + 0.1 -0 6 0.3 12 42 1.8 16 2 0.3 12 MAX 6.05 O 1.5 7.06 www.vishay.com 32 For technical questions, contact: sfer@vishay.com Document Number: 51011 Revision: 24-Jul-07 TS63 Multi-Turn Surface Mount Miniature 1/4" Square Cermet Trimmers, Fully Sealed ORDERING INFORMATION TS63 MODEL Y STYLE 500 k OHMIC VALUE 10 % TOLERANCE TR500 PACKAGING TR500: Tape and reel On request: TU50: Tube e3 LEAD FINISH e3: pure Sn Vishay Sfernice SAP PART NUMBERING GUIDELINES T S 6 3 Y 5 0 4 K R 1 0 MODEL STYLE OHMIC VALUE TOL PACKAGING CODE SPECIAL (IF APPLICABLE) See the end of this data book for conversion tables Document Number: 51011 Revision: 24-Jul-07 For technical questions, contact: sfer@vishay.com www.vishay.com 33 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of TS63
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |