 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Schottky barrier diode RSX301LA-30 Applications General rectification Dimensions (Unit : mm) Land size figure (Unit : mm) 2.0 Features 1) Small and Thin power mold type. (PMDT) 2) Low IR & Low VF 3) High reliability. 1.4 PMD Construction Silicon epitaxial planer Structure Taping specifications (Unit : mm) Absolute maximum ratings (Ta=25C) Parameter Reverse voltage (repetitive peak) Reverse voltage (DC) Average rectified forward current Forward current saurge peak (60Hz / 1cyc Junction temperature Storage temperature Symbol VRM VR Io IFSM Tj Tstg Limits 30 30 3 70 150 -40 to +150 Unit V V A A C C (*1)Tc=90C max Mounted on epoxy board. 180Half sine wave Electrical characteristics (Ta=25C) Parameter Forward voltage Reverse current 1.4 Symbol VF IR1 IR2 Min. - Typ. - Max. 0.42 90 200 Unit V A A Conditions IF=3.0A VR=15V VR=30V www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 1/3 2010.04 - Rev.E 4.4 6 RSX301LA-30 Electrical characteristics curves 10 FORWARD CURRENT:IF(A) Ta=125 1 Ta=150 Ta=25 Ta=-25 Ta=75 1000000 REVERSE CURRENT:IR(uA) 100000 10000 1000 100 10 1 0 100 200 300 400 500 600 0 5 10 Data Sheet Ta=150 Ta=125 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 1000 f=1MH Ta=75 Ta=25 0.1 100 0.01 Ta=-25 0.001 10 15 20 25 30 0 5 10 15 20 25 30 FORWARD VOLTAGE : VF(mV) VF-IF CHARACTERISTICS REVERSE VOLTAGE : VR(V) VR-IR CHARACTERISTICS REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 400 FORWARD VOLTAGE:VF(mV) 390 380 370 360 AVE:379.8mV 350 Ta=25 IF=3A n=30pcs 1000 900 REVERSE CURRENT:IR(uA) 800 700 600 500 400 300 200 100 0 AVE:86.89uA Ta=25 VR=30V n=30pcs 850 840 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 830 820 810 800 790 780 770 760 750 AVE:800.8p Ta=25 f=1MHz VR=0V n=10pcs VF DISPERSION MAP IR DISPERSION MAP Ct DISPERSION MAP 200 RESERVE RECOVERY TIME:trr(ns) Ifsm PEAK SURGE FORWARD CURRENT:IFSM(A) 150 1cyc 8.3ms 30 PEAK SURGE FORWARD CURRENT:IFSM(A) 25 20 15 10 AVE:11.8ns 5 0 Ta=25 IF=0.5A IR=1A Irr=0.25*IR n=10pcs 300 250 200 150 100 50 0 1 10 100 Ifsm 8.3m 8.3m 1cyc 100 AVE:178.0 50 0 IFSM DISRESION MAP trr DISPERSION MAP NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 300 TRANSIENT THAERMAL IMPEDANCE:Rth (/W) 250 PEAK SURGE FORWARD CURRENT:IFSM(A) 200 150 100 50 0 1 10 TIME:t(ms) IFSM-t CHARACTERISTICS 100 Ifsm 1000 Mounted on epoxy board Rth(j-a) 3 t 100 Rth(j-c) FORWARD POWER DISSIPATION:Pf(W) 2 Sin(=180) 1 D=1/2 DC 10 IM=100mA IF=1A 1 1ms time 0.1 0.001 300us 0.1 10 1000 0 0 1 2 3 4 5 TIME:t(s) Rth-t CHARACTERISTICS AVERAGE RECTIFIED FORWARD CURRENT : Io(A) Io-Pf CHARACTERISTICS www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 2/3 2010.04 - Rev.E RSX301LA-30 7 6 AVERAGE RECTIFIED FORWARD CURRENT:Io(A) 0A 0V Io t T DC Sin(=180) Data Sheet 0A 0V DC t T Io VR D=t/T VR=15V Tj=150 5 4 REVERSE POWER DISSIPATION:PR (W) 3 2 1 0 0 10 20 Sin(=180) 30 D=1/2 7 6 AVERAGE RECTIFIED FORWARD CURRENT:Io(A) 5 4 3 2 1 0 0 25 50 75 Sin(=180) 5 4 3 2 1 0 0 25 50 75 100 D=1/2 VR D=t/T VR=15V Tj=150 DC D=1/2 125 150 100 125 150 REVERSE VOLTAGE : VR(V) VR-PR CHARACTERISTICS AMBIENT TEMPERATURE:Ta() Derating Curve"(Io-Ta) CASE TEMPARATURE:Tc() Derating Curve(Io-Tc) 30 ELECTROSTATIC DISCHARGE TEST ESD(KV) 25 20 15 10 5 0 C=200pF R=0 C=100pF R=1.5k No break at 30kV No break at 30kV ESD DISPERSION MAP www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 3/3 2010.04 - Rev.E Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2010 ROHM Co., Ltd. All rights reserved. R1010A |
Price & Availability of RSX301LA-3010
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |