|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High Performance SMD LED with Reflector 93-21UBC/C430/TR8 Features Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Eia std. package. IC compatible. Pb-free Applications Automotive: backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Indicator and backlight for audio and video equipment Indicator and backlight for battery driven equipment. Flat backlight for LCD, switch and symbol. Light pipe application. General use. Device Selection Guide Chip Material Emitted Color Lens Color Water Clear GaN/SiC Blue verlight Electronics Co., Ltd. Device No. : DSE-931-049 http://www.everlight.com prepared date: 08-02-2004 Rev. 1.1 Page: 1 of 10 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 93-21UBC/C430/TR8 Package Dimensions 0.4 0.07 0.5 0.07 2.2 0.1 Anode mark 3.0 0.1 4.6 0.2 2.7 0.1 1.0 0.1 1.5 0.1 1.7 0.1 0.62 +0.13 -0 + Polarity 0.15 0.05 0.26 0.1 For reflow soldering (propose) 4.34 0.1 0.4 0.1 0.5 0.1 Rev. 1.1 0.74 0.1 0.74 0.1 Notes: All dimensions are in millimeters. verlight Electronics Co., Ltd. Device No. : DSE-931-049 http://www.everlight.com prepared date: 08-02-2004 Page: 2 of 10 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 93-21UBC/C430/TR8 Absolute Maximum Ratings (Ta=25) Parameter Reverse Voltage Forward Current Operating Temperature Storage Temperature Soldering Temperature Electrostatic Discharge Power Dissipation Peak Forward Current(Duty 1/10 @ 1KHZ) Symbol VR IF Topr Tstg Tsol ESD Pd Rating 5 30 -40 ~ +85 -40 ~ +100 260(for 5second) 2000 140 Unit V mA V mW IFP 70 mA verlight Electronics Co., Ltd. Device No. : DSE-931-049 http://www.everlight.com prepared date: 08-02-2004 Rev. 1.1 Page: 3 of 10 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 93-21UBC/C430/TR8 Electro-Optical Characteristics (Ta=25) Parameter Luminous intensity Viewing Angle Peak Wavelength Symbol Iv 21/2 p d VF IR Min. 18 Typ. 35 130 428 466 65 3.8 Max. Unit mcd deg nm nm nm V A Condition If=20mA If=20mA If=20mA If=20mA If=20mA If=20mA VR =5V --------------------4.5 50 ------------------------- Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current ----- verlight Electronics Co., Ltd. Device No. : DSE-931-049 http://www.everlight.com prepared date: 08-02-2004 Rev. 1.1 Page: 4 of 10 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 93-21UBC/C430/TR8 Typical Electro-Optical Characteristics Curves verlight Electronics Co., Ltd. Device No. : DSE-931-049 http://www.everlight.com prepared date: 08-02-2004 Rev. 1.1 Page: 5 of 10 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 93-21UBC/C430/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm verlight Electronics Co., Ltd. Device No. : DSE-931-049 http://www.everlight.com prepared date: 08-02-2004 Rev. 1.1 Page: 6 of 10 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 93-21UBC/C430/TR8 Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. Moisture Resistant Packaging Label Aluminum moistue-proof bag Desiccant Label verlight Electronics Co., Ltd. Device No. : DSE-931-049 http://www.everlight.com prepared date: 08-02-2004 Rev. 1.1 Page: 7 of 10 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 93-21UBC/C430/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% No. 1 Items Reflow Soldering Test Condition Temp. : 2605 Min. 5sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Temp. : -40 IF = 20 mA 85/ 85%RH Test Sample Ac/Re Hours/Cycles Size 6 Min. 22 PCS. 0/1 2 Temperature Cycle 300 Cycles 22 PCS. 0/1 3 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. 22 PCS. 0/1 4 5 6 7 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 verlight Electronics Co., Ltd. Device No. : DSE-931-049 http://www.everlight.com prepared date: 08-02-2004 Rev. 1.1 Page: 8 of 10 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 93-21UBC/C430/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30 or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30 or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 280 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. verlight Electronics Co., Ltd. Device No. : DSE-931-049 http://www.everlight.com prepared date: 08-02-2004 Rev. 1.1 Page: 9 of 10 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 93-21UBC/C430/TR8 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com verlight Electronics Co., Ltd. Device No. : DSE-931-049 http://www.everlight.com prepared date: 08-02-2004 Rev. 1.1 Page: 10 of 10 Prepared by: Bennett |
Price & Availability of 93-21UBCC430TR8 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |