 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DC/DC Converters ctparts.com SPECIFICATIONS CTDD2727DF-S1.5K-5M Series Wide Input Isolated & Regulated 5W Output, Single Output Part Number CTDD2727DF-1205-S1.5K-5M CTDD2727DF-1209-S1.5K-5M CTDD2727DF-1212-S1.5K-5M CTDD2727DF-1215-S1.5K-5M CTDD2727DF-1224-S1.5K-5M CTDD2727DF-2405-S1.5K-5M CTDD2727DF-2409-S1.5K-5M CTDD2727DF-2412-S1.5K-5M CTDD2727DF-2415-S1.5K-5M CTDD2727DF-2424-S1.5K-5M CTDD2727DF-4805-S1.5K-5M CTDD2727DF-4809-S1.5K-5M CTDD2727DF-4812-S1.5K-5M CTDD2727DF-4815-S1.5K-5M CTDD2727DF-4824-S1.5K-5M Vin Nom. (VDC) 12 12 12 12 12 24 24 24 24 24 48 48 48 48 48 Input Range (VDC) 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 36-72 36-72 36-72 36-72 36-72 Vin Max.* (VDC) 20 20 20 20 20 40 40 40 40 40 80 80 80 80 80 Vout (VDC) 5 9 12 15 24 5 9 12 15 24 5 9 12 15 24 Iout Max. (mA) 1000 556 420 333 208 1000 556 420 333 208 1000 556 420 333 208 Iout Min.** (mA) 100 56 42 34 21 100 56 42 34 21 100 56 42 34 21 Effi. Typ. (%) 74 75 77 80 82 77 80 81 84 85 79 82 85 85 86 Not shown at actual size. Compliant RoHS *If Input voltage above specified may cause permanent damage to the device **The load should not be less than 10%, otherwise ripple will increase dramatically ISOLATION SPECIFICATIONS Item Isolation Voltage Isolation Resistance Test Condition Flash tested for 1 minute Test at 500VDC MIN 1500 1000 TYP MAX Units VDC M FEATURES Efficiency: To 85% Temperature Range: -40C to +85C Isolation: 1.5KVDC Miscellaneous: Wide (2:1) Input Range. Metal Shielding Package. Short circuit protection. No heat sink required. Industry Standard Pinout. Single Output Samples available. OUTPUT SPECIFICATIONS Item 5W Output Power Positive voltage accuracy Load regulation Line regulation Temperature drift (Vout) Ripple Noise Refer to Recommended Circuit From 10% to 100% load Input Voltage from low to high Refer to Temp. Derating Graph 20Hz to 300KHz Bandwidth DC-20MHz Bandwidth 30 80 Test Condition MIN 0.5 1 0.5 0.2 TYP MAX 5 3 1 0.5 0.03 50 150 Units W % % % %/C mVp-p mVp-p CHARACTERISTICS Output Short Circuit Protection: Continuous Temperature Rise at Full Load: 30C (Typ.) Cooling: Free air convection No Load, Power Consumption: 300mW (typical) Operating Temperature Range: -40C to +85C Storage Temperature Range: -55C to +125C Lead Temperature: 300C (1.5mm from case for 10 seconds) Storage Humidity Range: < 95% Case Material: Metal MTBF: >1,000,000 hours Miscellaneous: RoHS Compliant. Switching frequency 100% load, nominal input voltage 300 KHz Note: 1. All specifications measured at TA=25C, humidity<75%, nominal input voltage and rated output unless otherwise specified. TYPICAL CHARACTERISTICS 120 Temperature Derating Graph Output Power (%) 100 80 60 40 20 0 -40 0 120 40 71 85 Ambient Temperature (C) Safe Operating Area 01.18.07 Technologies Manufacturer of Passive and Discrete Semiconductor Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright (c) 2006 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice CENTRAL DC/DC Converters ctparts.com CTDD2727DF-S1.5K-5M Series Wide Input Isolated & Regulated 5W Output, Single Output OUTLINE DIMENSIONS & RECOMMENDED FOOTPRINT DETAILS CTDD2727DF-S1.5K-5M Package 27.50 9.00 4.00 20.32 3 4 Side View 27.50 21 Bottom View 5.08 CTDD2727DF-S1.5K-5M Footprint 1.60o+0.15/-0 2.54 4 3 1 2 2.54 Note: All Pins on a 2.54mm pitch; all pin diameters are 0.80mm; (Tolerance: +25) all dimensions in mm. PIN CONNECTIONS Pin Function 1 2 3 4 GND Vin +Vo OV 3 21 4 Bottom View RECOMMENDED CIRCUIT All the CTDD2727DF-S1.5K-5M Series have been tested according to the following recommended testing circuit before leaving factory. This series should be tested under load. Never be tested under no load (See figure 1 & 2). If you want to further decrease the input/output ripple, you can increase capacitance properly or choose capacitors with low ESR. However, the capacitance should not be too high (See table 1). If you want to use the products in high EMI, please choose our metal packagedproducts. Figure 2 lp Vin C in C out (-40+85C) 100F/1A (electrolytic capacitor) Figure 1 Vin GND +Cin + Vout 0V 12V & 24V & 48V 100F Cout DC DC Input Current (A) External Capacitor Table (table 1) Input Voltage Range Input Voltage (V) 01.18.07 Technologies Manufacturer of Passive and Discrete Semiconductor Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright (c) 2006 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice CENTRAL |
Price & Availability of CTDD2727DF-4812-S15K-5M
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |