![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Oscilent Corporation IF SAW Filter | 835-IF240.0M-E Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 835-IF240.0M-E TYPE : 35.0 x 12.8 Thru Hole Base Station & Repeater Jan. 01, 2007 240.0 MHz Bandpass Filter PART NUMBER : 835-IF240.0M-E OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss Source Impedance (single ended)* Load Impedance (single ended)* 1.5dB Bandwidth 3.0dB Bandwidth 40.0dB Bandwidth Amplitude Ripple (Fo+/-9.375 MHz) Group Delay Variation (Fo+/-9.375 MHz) Absolute Delay at Fo Ultimate Rejection Temperature Coefficient Storage Temperature Operating Temperature Minimum 239.85 18.9 19.2 50 -40 -30 Typical 240.00 30.4 50 50 19.16 19.45 20.85 1.0 40 2.67 55 -20 Maximum 240.15 31.5 21.1 1.5 100 +85 +70 Units MHz dB ohm ohm MHz MHz MHz dBp-p ns s dB ppm/C C C * with Matching Network (Ref. Testing Environment Circut as shown below). Those impedances could be modified with different impedances values and/or structures, if necessary. ** Custom SAW IF Filters available. Contact Oscilent for assistance. PACKAGE OUTLINE (mm) Oscilent Corporation IF SAW Filter | 835-IF240.0M-E Page 2 of 2 PIN Descriptions: IN-1, OUT 5, GROUND -2,3,4,6,Case TEST ENVIRONMENT Source & Load Impedance: 50 ohm FREQUENCY RESPONSE Part No.: 835-IF240.0M-E Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map |
Price & Availability of 835-IF2400M-E
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |