View 19-218UWD_4785287.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet 0603 Package Chip LED (0.3mm Height)
19-218UWD/S327/TR8
Features
Package in 8mm tape on 7diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. The product itself will remain within RoHS compliant version.
Descriptions
The 19-218 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc.
Applications
Automotive: backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use.
Device Selection Guide Part No.
19-218UWD/S327/TR8
Chip
Material InGaN
Emitted Color Pure White
Lens Color
Yellow Diffused
Everlight Electronics Co., Ltd. Device No. : DSE-198-001
http://www.everlight.com Prepared date: 23-Aug-2005
Rev.5
Page: 1 of 13
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-218UWD/S327/TR8
Package Outline Dimensions
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. Device No. : DSE-198-001
http://www.everlight.com Prepared date: 23-Aug-2005
Rev.5
Page: 2 of 13
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-218UWD/S327/TR8
Absolute Maximum Ratings (Ta=25)
Parameter Reverse Voltage Forward Current Operating Temperature Storage Temperature Soldering Temperature Electrostatic Discharge Power Dissipation Peak Forward Current (Duty 1/10 @1KHz) Symbol VR IF Topr Tstg Tsol ESD Pd IF Rating 5 25 -40 ~ +85 -40 ~ +90 260 (for 5 seconds) 150 110 100 Unit V mA V mW mA
Notes: *We only guarantee the ESD <2000V after customer to process. Electro-Optical Characteristics (Ta=25)
Parameter
Luminous Intensity Viewing Angle Forward Voltage
Symbol Iv 21/2 VF IR
Min. 112 ----2.70 -----
Typ. ----130 ---------
Max. 285 ----3.30 50
Unit mcd deg V A
Condition
IF=10mA
Reverse Current
VR=5V
Notes:
1.Tolerance of Luminous Intensity 10% 2.Tolerance of Forward Voltage 0.05V
Everlight Electronics Co., Ltd. Device No. : DSE-198-001
http://www.everlight.com Prepared date: 23-Aug-2005
Rev.5
Page: 3 of 13
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-218UWD/S327/TR8
Bin Range Of Luminous Intensity & Forward Voltage
Symbol Bin Code R1 R2 S1 S2 1 2 3 4 5 6 Min. 112 140 180 225 2.70 2.80 2.90 3.00 3.10 3.20 Max. 140 180 225 285 2.80 2.90 3.00 3.10 3.20 3.30 Unit Condition
IV
mcd
IF=10mA
VF
V
IF=10mA
Notes:
1.Tolerance of Luminous Intensity 10% 2.Tolerance of Forward Voltage 0.05V
Everlight Electronics Co., Ltd. Device No. : DSE-198-001
http://www.everlight.com Prepared date: 23-Aug-2005
Rev.5
Page: 4 of 13
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-218UWD/S327/TR8
Chromaticity Coordinates Specifications for Bin Grading Bin Code CIE_x 0.27 0.27 0.29 0.29 0.283 0.27 0.27 0.29 0.29 0.29 0.29 0.31 0.31 0.29 0.29 0.293 0.31 0.31 CIE_y 0.24 0.254 0.283 0.25 0.24 0.254 0.287 0.315 0.283 0.25 0.283 0.311 0.278 0.283 0.315 0.32 0.32 0.311
Condition
1
2
IF=10mA
3
4
Notes:
1.The C.I.E. 1931 chromaticity diagram ( Tolerance 0.01). 2.The products are sensitive to static electricity and care must be fully taken when handling products.
Everlight Electronics Co., Ltd. Device No. : DSE-198-001
http://www.everlight.com Prepared date: 23-Aug-2005
Rev.5
Page: 5 of 13
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-218UWD/S327/TR8 CIE Chromaticity Diagram
0.34 0.33 0.32 0.31 0.30 0.29
4
y
0.28 0.27 0.26 0.25 0.24 0.23 0.25
2
3
1
0.26
0.27
0.28
0.29
0.30
0.31
0.32
x
Everlight Electronics Co., Ltd. Device No. : DSE-198-001
http://www.everlight.com Prepared date: 23-Aug-2005
Rev.5
Page: 6 of 13
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-218UWD/S327/TR8
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd. Device No. : DSE-198-001
http://www.everlight.com Prepared date: 23-Aug-2005
Rev.5
Page: 7 of 13
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-218UWD/S327/TR8
Label explanation
CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank
MSL-2
Reel Dimensions
Note: The tolerances unless mentioned is 0.1mm , Unit = mm
Everlight Electronics Co., Ltd. Device No. : DSE-198-001 http://www.everlight.com Prepared date: 23-Aug-2005 Rev.5 Page: 8 of 13
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-218UWD/S327/TR8
Carrier Tape Dimensions:
Quantity: 3000 PCS per reel Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Moisture Resistant Packaging
Everlight Electronics Co., Ltd. Device No. : DSE-198-001
http://www.everlight.com Prepared date: 23-Aug-2005
Rev.5
Page: 9 of 13
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-218UWD/S327/TR8
Detail of MSID label
Detail of Moisture indicator decals
LEVEL
CAUTION This bag contains MOISTURE SENSITIVE DEVICES 1.Shelf life in sealed bag:12 months at 5~30 and <90% relative Humidity(RH). 2.Devices have to be mounted within 168 hours or stored at 70%RH after this bag is opened ; otherwise, the warranty of the devices will be voided immediately. 3.If baking is required , devices may be baked for 24 hours at 655C.
If blank ,see adjacent bar code label
Note:Level and body temperature define by IPC/JEDEC J-STD-020
Everlight Electronics Co., Ltd. Device No. : DSE-198-001
http://www.everlight.com Prepared date: 23-Aug-2005
Rev.5
Page: 10 of 13
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-218UWD/S327/TR8
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10%
No. 1
Items Reflow Soldering
Test Condition Temp. : 2605 Min. 5sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Temp. : -40 IF = 20 mA 85/ 85%RH
Test Sample Hours/Cycles Size 6 Min. 300 Cycles 22 PCS.
Ac/Re 0/1
2
Temperature Cycle
22 PCS.
0/1
3
Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity
300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs.
22 PCS.
0/1
4 5 6 7
22 PCS. 22 PCS. 22 PCS. 22 PCS.
0/1 0/1 0/1 0/1
Judgment Criteria of Failure for Reliability Test Measuring Item Forward Voltage Reverse Current Luminous Intensity Symbol VF IR IV Measuring Condition IF=10mA VR=5V IF=10mA Judgments Criteria for Failure >U x 1.2 >U x 2.0 >S x 0.5
Note: U means the upper limit of the specified characteristics. S means the initial value.
Everlight Electronics Co., Ltd. Device No. : DSE-198-001
http://www.everlight.com Prepared date: 23-Aug-2005
Rev.5
Page: 11 of 13
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-218UWD/S327/TR8
Precautions For Use
1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd. Device No. : DSE-198-001
http://www.everlight.com Prepared date: 23-Aug-2005
Rev.5
Page: 12 of 13
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
19-218UWD/S327/TR8
4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com
Everlight Electronics Co., Ltd. Device No. : DSE-198-001
http://www.everlight.com Prepared date: 23-Aug-2005
Rev.5
Page: 13 of 13
Prepared by: Jeff Tsai

▲Up To Search▲

Price & Availability of 19-218UWD

	To Download 19-218UWD Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .