 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ELECTRONIC COMPONENTS RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de Anderungen vorbehalten / subject to change without notice 75W Triple Output with PFC Function Features : TP-75 series Universal AC input / Full range Built-in active PFC function, PF>0.95 Protections:Short circuit/Over load/Over voltage Low profile: 33mm thickness LED indicator for power on Cooling by free air convection Fixed switching frequency at PFC:67KHz PWM:134KHz 3 years warranty SPECIFICATION MODEL OUTPUT NUMBER DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVER LOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC (Note 4) TP-75A CH1 5V 7A 1.5 ~ 10A 74W 120mVp-p 4.0% 1.0% 4.0% 100mVp-p 8.0% 1.0% 8.0% CH1: 4.75 ~ 5.5V 3.0% 1.0% 3.0% CH2 12V 3A 0.2 ~ 4A CH3 -5V 0.6A 0 ~ 0.6A TP-75B CH1 5V 7A 1.5 ~ 10A 75.8W 100mVp-p 3.0% 1.0% 3.0% 120mVp-p 4.0% 1.0% 4.0% 120mVp-p 8.0% 1.0% 8.0% CH2 12V 3A 0.2 ~ 4A CH3 -12V 0.4A 0 ~ 0.6A TP-75C CH1 5V 6A 1.5 ~ 10A 75W 100mVp-p 3.0% 1.0% 3.0% 120mVp-p 4.0% 1.0% 4.0% 120mVp-p 8.0% 1.0% 8.0% CH2 15V 2.5A 0.2 ~ 3A CH3 -15V 0.5A 0 ~ 0.6A RIPPLE & NOISE (max.) Note.2 100mVp-p 800ms, 60ms at full load 36ms at full load Note.5 90 ~ 264VAC 127 ~ 370VDC PF>0.98/115VAC at full load 47 ~ 63Hz PF>0.95/230VAC 70% 1.5A/115VAC 0.8A/115VAC COLD START 20A/230VAC <2mA / 240VAC 105 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 5.75 ~ 6.75V on +5V Protection type : Shut down o/p voltage, re-power on to recover -10 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 0.03%/ , 10 ~ 95% RH (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC 1min. I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC Compliance to EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A 198.4K hrs min. MIL-HDBK-217F (25 179*99*33mm (L*W*H) 0.65Kg; 20pcs/12.7Kg/0.64CUFT ) EMI CONDUCTION & RADIATION HARMONIC CURRENT EMS IMMUNITY MTBF DIMENSION PACKING OTHERS NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Derating may be needed under low input voltages. Please check the derating curve for more details. File Name:TP-75-SPEC 2006-04-13 75W Triple Output with PFC Function Features : TP-75 series Universal AC input / Full range Built-in active PFC function, PF>0.95 Protections:Short circuit/Over load/Over voltage Low profile: 33mm thickness LED indicator for power on Cooling by free air convection Fixed switching frequency at PFC:67KHz PWM:134KHz 3 years warranty SPECIFICATION MODEL OUTPUT NUMBER DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR INPUT EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (max.) LEAKAGE CURRENT OVER LOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC (Note 4) TP-75D CH1 5V 7A 1.5 ~ 10A 75.8W 120mVp-p 4.0% 1.0% 4.0% 120mVp-p 8.0% 1.0% 8.0% CH1: 4.75 ~ 5.5V 3.0% 1.0% 3.0% 36ms at full load Note.5 90 ~ 264VAC TP-7503 CH2 24V 1.5A 0.2 ~ 2.5A CH3 12V 0.4A 0 ~ 0.6A CH1 5V 9A 1.5 ~ 10A 75W 100mVp-p 3.0% 1.0% 3.0% 50mVp-p 4.0% 1.0% 4.0% 120mVp-p 8.0% 1.0% 8.0% CH2 3.3V 8A 0.2 ~ 8A CH3 12V 0.3A 0 ~ 0.6A RIPPLE & NOISE (max.) Note.2 100mVp-p 800ms, 60ms at full load 127 ~ 370VDC PF>0.98/115VAC at full load 47 ~ 63Hz PF>0.95/230VAC 70% 1.5A/115VAC 0.8A/115VAC COLD START 20A/230VAC <2mA / 240VAC 105 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 5.75 ~ 6.75V on +5V Protection type : Shut down o/p voltage, re-power on to recover -10 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC 1min. I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY MTBF Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A 198.4K hrs min. MIL-HDBK-217F (25 179*99*33mm (L*W*H) 0.65Kg; 20pcs/12.7Kg/0.64CUFT ) OTHERS DIMENSION PACKING NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Derating may be needed under low input voltages. Please check the derating curve for more details. File Name:TP-75-SPEC 2006-04-13 ELECTRONIC COMPONENTS RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de Anderungen vorbehalten / subject to change without notice 75W Triple Output with PFC Function Mechanical Specification 60 65 TP-75 Case No. 920A series Unit:mm LED +ADJ. 1 6.15 2 3 7.62 4 5 6 7 8 49.5 2-M4 L=4mm 4-M4 L=6mm 8 17 25 117 179 99 Terminal pin number assignment : Pin No. 1 2,3 4 5 Assignment DC OUTPUT +V2 COM DC OUTPUT +V1 DC OUTPUT +V3 Pin No. 6 7 8 Assignment FG AC/N AC/L Derating Curve Output Derating VS Input Voltage Ta=25 100 With 18CFM Forced AIR (15cm) 100 90 80 80 70 60 LOAD (%) LOAD (%) Convection 40 60 50 40 20 -10 0 10 20 30 40 50 60 70 (HORIZONTAL) 85 100 115 125 155 32.5 230 264 File Name:TP-75-SPEC 2006-04-13 33 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (VAC) 60Hz ELECTRONIC COMPONENTS RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de Anderungen vorbehalten / subject to change without notice 18 |
Price & Availability of TP-75
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |