View F2202_4745411.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SAW Bandpass Filter F2202
Features
RF bandpass filter Usable bandwidth 0.6MHz No matching single-ended operation Ceramic Surface Mounted Device Package ( 5.0 mm x 5.0 mm )
Package Dimensions
2.080.15 0.60.15
1 2 3
5.000.15
8
1.20.15
8
5.000.15
1 2 3
7
7 6 5
ITF 2202
4
6 5
1.350.15
1.270.05
4
Dimensions shown are nominal in millimeters Body : Al2O3 Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um Ni Plating
Pin Configurations 2 6 1, 3, 4, 5, 7, 8 Input Output Ground
Maximum Ratings
Parameters Operating Temperature Range Storage Temperature Range Power Handling Capability Electrostatics Sensitive Device (ESD) Unit C C dBm Minimum -30 -40 Typical 25 Maximum 85 85 10
I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809
Part No. Rev. Date Rev.
F2202 2008/07/11 NR8001-AS03 1/7
SAW Bandpass Filter F2202
Preliminary Specifications
Minimum Center Frequency ( Fc ) Insertion Loss Pass Bandwidth Amplitude Ripple (Fc 0.3MHz) VSWR (Fc 0.3MHz) 0.6 Typical 220.0 2.5 2.0 0.5 1.5 1.5 2.0 Maximum 3.5 Unit MHz dB MHz dB
Attenuation ~ Fc -10.7MHz Fc + 10.7MHz ~
37 25
-
-
dB
Temperature Range (Operational) Input/Output Impedance
-30
25 50
85
Ohms
Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances
I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809
Part No. Rev. Date Rev.
F2202 2008/07/11 NR8001-AS03 2/7
SAW Bandpass Filter F2202
Matching Schematic
( Actual matching values may vary due to PCB layout and parasitics )
Input 50
Output 50
Marking Configuration
ITF 1) 2202 2)
1) Manufacturer name 2) Marking Number
I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809
Part No. Rev. Date Rev.
F2202 2008/07/11 NR8001-AS03 3/7
SAW Bandpass Filter F2202
Frequency Response
I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809
Part No. Rev. Date Rev.
F2202 2008/07/11 NR8001-AS03 4/7
SAW Bandpass Filter F2202
Input / Output VSWR Charts
Input / Output Smith Charts
I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809
Part No. Rev. Date Rev.
F2202 2008/07/11 NR8001-AS03 5/7
SAW Bandpass Filter F2202
Packing Specification
1. Reeling Quantity : 3000 pcs / 13" reel ( or 1000 pcs / 7" reel ) 2. Taping Structure : The tape shall be wound around the reel in the direction shown below.
TOP COVER TAPE
REEL
CARRIER TAPE
Tape Specification
1. Leader part and vacant position specification
Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min.
END START
Tape Running Direction
2. Tensile strength of carrier tape 4.4N/mm width
Top cover tape Direction of pull
3. Top cover tape adhesion
0~15 degree
1) pull off angle : 0~15 2) speed : 300mm/min 3) force : 20~70g
Carrier tape
I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809
Part No. Rev. Date Rev.
F2202 2008/07/11 NR8001-AS03 6/7
SAW Bandpass Filter F2202
Carrier Tape Dimensions [unit : mm]
A B C D E F 5.50 0.1 5.50 0.1 7.25 0.1 1.95 0.1 12.00 0.1 8.00 0.1
Part Direction
Tape Running Direction
Reel Dimensions [unit : mm]
G = 2G = 12.40 mm
I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809
Part No. Rev. Date Rev.
F2202 2008/07/11 NR8001-AS03 7/7

▲Up To Search▲

Price & Availability of F2202

	To Download F2202 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .