 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Model 7057 N (M) Crimp 50 Use for your 50 N (M) cable assembly applications. Features * Precision machined brass body with white bronze plating (reduces intermodulation problems in telecommunications applications). Gold plated center contacts. See page 2 for cable type, crimp information and cable assembly instructions. Specifications Nominal impedance Frequency VSWR Center / Outer contact resistance Insulation resistance Number of insertions 50 0-11 GHz 1.30 max, 0-11 GHz 1.0 / 0.2 m 5000 M 500 * Materials * * * Body: Machined brass with white bronze plating. Male center pin contacts: Gold plated (30 microinches) brass. High quality machined PTFE dielectric. Information Model: 7057, TYPE N (M) 55, 142, 223, 400 Ratings: Voltage: 500 Vrms Operating Temperature: -85 F to +131 F (-65 C to +155 C) Max. USA: Sales: 800-490-2361 Technical Support: technicalsupport@pomonatest.com Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = .02" (.51 mm), .xxx = .005" (.127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Last Update: 10/1/07 D1103805, Rev. 003 Page 1 of 2 Cable Type and Crimp Die Sizes Connector Cable Groups Crimp Die set* Model # Size (Hex/Pin) 7057 55, 142, 223, 400 Model 7281 (Crimp) (.213 / .100) 7058 58, 58A, 58C, 141, Model 7281 (Compression) 141A (.--- / .100) *For use with Pomona crimp tool Model 7277. Cable Assembly Instructions Model 7057 USA: Sales: 800-490-2361 Technical Support: technicalsupport@pomonatest.com Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = .02" (.51 mm), .xxx = .005" (.127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Last Update: 10/1/07 D1103805, Rev. 003 Page 2 of 2 |
Price & Availability of 7057
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |