 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FLAMEPROOF POWER METAL FILM RESISTORS ISO-9001 Registered MFP SERIES * Small size for power rating * Flameproof protection ELECTRICAL DATA: MFP05 Power rating at 70C watts Resistance range watts Limiting element voltage volts TCR ppm/C Resistance Tolerance * % Standard Values Thermal Impedance Ambient Temperature * Below 1 ohm 5% TOL preferred. MFP1 <1 ohm: 0.7>1 ohm:1.0 0.1 - 1M 350 MFP2 2 1R0 - 1M 0.5 7R5 - 15R0 100 <1 ohm:300 1 ohm-9.1 ohm: 200 >10 ohm:100 1, 2, 5 E24 preferred 100 C/watt C 150 120 -55 to 155 82 PHYSICAL DATA: Dimensions (mm) and Weight (g) Type MFP05 MFP1 MFP2 L max. 3.5 6.2 10.0 D max. 1.8 2.3 4.0 f min. 22.4 21.0 19.0 d nom. 0.5 0.6 0.8 PCB mounting centers 7.6 10.2 18.4 Min. bend radius 0.5 0.6 1.2 Wt. nom. 0.1 0.3 0.55 Construction: The resistance element is a precisely controlled thin film of metal alloy on a high purity ceramic core, protected by a cement coating applied so that terminations remain completely clear. Thsi permits a well-defined body length (clean lead to clean lead dimension "L". Terminations: Material: Strength: Solder coated copper wire The terminations meet the requirements of IEC 68.2.21. The terminations meet the requirements of IEC 115.1 Clause 4.17.3.2. Solvent Resistance: Marking: Resistors are color coded with 4 or 5 bands depending on value and tolerance. IEC colors are used. Solderability: The body protection and marking are resistant t oall normal industrial cleaning solvents suitable for printed circuits. The resistor coating will not burn or emit incandescent particles under any condition of applied temperature or power overload. Flammability: WIREWOUND AND FILM TECHNOLOGIES DIVISION 736 Greenway Road * Boone, North Carolina 28607-1860 * Tel: 828-264-8861 * Fax: 828-264-8866 * www.irctt.com 1 ISO-9001 Registered PERFORMANCE DATA: Maximum Load at rated power: 1000 hours at 70C Shelf Life: 12 months at room temperature Derating from derated power at 70C Climatic Climatic category T mperature rapid change e Resistance to solder heat Voltage proof R% R% R% R% R% R% R% R% 5 2 Zero at 155C 3 50/155/56 0.5 0.5 500 min APPLICATION NOTES: 1. If the resistors are to dissipate full rated power, it is recommended that the terminations should not be soldered closer than 4mm from the body. 2. Due to operating temperature limitations imposed by some pcb materials, derating may be necessary. An estimate of the temperature rise to be expected can be calculated using the thermal impedance figures given under Electrical Data. 3. MFP resistors can also be supplied pre-formed, contact factory for details. PACKAGING: MFP resistors are normally supplied tape packed ready for loading onto automatic sequencing and insertion machines. The standard taping method and critical dimensions are shown below. Component wires will not protrude beyond the outside edge of the tapes. All taped resistors will be supplied either on reels or in ammopacks, depending on quantities ordered. Pre-formed resistors are supplied loose packed in plastic bags or boxes. This product and packaging is denoted code F. STANDARD QUANTITIES PER PACKAGE: Type Reel Ammopack A Code R A MFP05 5000 5000 MFP1 5000 5000 MFP2 2500 2500 HOW TO ORDER: Sample part number: MFP1 Type Value Tolerance (G = 2%, J = 5%) Packaging Details 6K8 J R 2 WIREWOUND AND FILM TECHNOLOGIES DIVISION 736 Greenway Road * Boone, North Carolina 28607-1860 * Tel: 828-264-8861 * Fax: 828-264-8866 * www.irctt.com |
Price & Availability of MFP16K8GR
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |