View SBR8U60P5_4680238.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SBR8U60P5
8A SBR(R) SUPER BARRIER RECTIFIER PowerDI(R)5
Please click here to visit our online spice models database.
Features NEW PRODUCT
* * * * * * Ultra Low Forward Voltage Drop Patented Super Barrier Rectifier Technology Soft, Fast Switching Capability 150C Operating Junction Temperature Lead Free Finish, RoHS Compliant (Note 1) "Green" Molding Compound (No Br, Sb)
Mechanical Data
* * * * * * * * Case: PowerDI 5 Case Material: Molded Plastic, "Green" Molding compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020D Terminals: Finish - Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Polarity: See Below Marking Information: See Page 2 Ordering Information: See Page 2 Weight: 0.093 grams (approximate)
(R)
LEFT PIN RIGHT PIN
BOTTOMSIDE HEAT SINK
Top View
Bottom View
Note: Pins Left & Right must be electrically connected at the printed circuit board.
Maximum Ratings
@TA = 25C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Output Current @TC = 140C Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load
Symbol VRRM VRWM VRM IO IFSM
Value 60 8 280
Unit V A A
Thermal Characteristics
Characteristic Maximum Thermal Resistance Thermal Resistance Junction to Soldering (Note 2) Thermal Resistance Junction to Ambient (Note 3) Operating and Storage Temperature Range Symbol RJS RJA TJ, TSTG Value 3 60 -65 to +150 Unit C/W C
Electrical Characteristics
Characteristic Forward Voltage Drop Leakage Current (Note 4)
Notes:
@TA = 25C unless otherwise specified Symbol VF IR Min Typ 0.30 0.46 0.12 Max 0.35 0.53 0.5 0.6 100 Unit V mA Test Condition IF = 1.0A, TJ = 25C IF = 8A, TJ = 25C IF = 8A, TJ = 125C VR = 60V, TJ = 25C VR = 60V, TJ = 125C
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html. 2. Theoretical RJS calculated from the top center of the die straight down to the PCB cathode tab solder junction. 3. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. 4. Short duration pulse test used to minimize self-heating effect.
SBR and PowerDI are registered trademarks of Diodes Incorporated. 1 of 4 SBR8U60P5
Document number: DS31731 Rev. 3 - 2
April 2009
(c) Diodes Incorporated
www.diodes.com
SBR8U60P5
IF, INSTANTANEOUS FORWARD CURRENT (A)
TA = 150C TA = 125C
IR, INSTANTANEOUS REVERSE CURRENT (A)
10
100,000
T A = 150C
1
T A = 85C
10,000
T A = 125C
NEW PRODUCT
0.1
1,000
TA = 85C
0.01
TA = 25C TA = -55C
100
TA = 25C
0.001
0.0001 0 100 200 300 400 500 600 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig.1 Typical Forward Characteristics
10 0 10 20 30 40 50 60 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 2 Typical Reverse Characteristics
10,000
f = 1MHz
CT, TOTAL CAPACITANCE (pF)
1,000
100 0.1 1 10 100 VR, REVERSE VOLTAGE (V) Fig. 3 Typical Total Capacitance
Ordering Information
Part Number SBR8U60P5-13
Notes:
(Note 5) Case (R) PowerDI 5 Packaging 5000/Tape & Reel
5. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
Marking Information
S8U60
YYWWK
S8U60 = Product Type Marking Code = Manufacturers' Code Marking YYWW = Date Code Marking YY = Last Two Digits of Year (ex: 09 for 2009) WW = Week Code 01 to 52 K = Factory Designator
SBR and PowerDI are registered trademarks of Diodes Incorporated. 2 of 4 SBR8U60P5
Document number: DS31731 Rev. 3 - 2
April 2009
(c) Diodes Incorporated
www.diodes.com
SBR8U60P5 Package Outline Dimensions
A D b2 A2 D2
NEW PRODUCT
L
E
E1
E2
W L1 e b1 b1 A2
PowerDI 5 Dim Min Max A 1.05 1.15 A2 0.33 0.43 b1 0.80 0.99 b2 1.70 1.88 D 3.90 4.05 D2 3.054 Typ E 6.40 6.60 e 1.84 Typ E1 5.30 5.45 E2 3.549 Typ L 0.75 0.95 L1 0.50 0.65 W 1.10 1.41 All Dimensions in mm
(R)
Suggested Pad Layout
Z C
X2
E1
X1 Y1
Dimensions Z X1 X2 Y1 Y2 C E1
Value (in mm) 6.6 1.4 3.6 0.8 4.7 3.87 0.9
Y2
SBR and PowerDI are registered trademarks of Diodes Incorporated. 3 of 4 SBR8U60P5
Document number: DS31731 Rev. 3 - 2
April 2009
(c) Diodes Incorporated
www.diodes.com
SBR8U60P5
IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDING TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
NEW PRODUCT
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2009, Diodes Incorporated www.diodes.com
SBR and PowerDI are registered trademarks of Diodes Incorporated. 4 of 4 SBR8U60P5
Document number: DS31731 Rev. 3 - 2
April 2009
(c) Diodes Incorporated
www.diodes.com

▲Up To Search▲

Price & Availability of SBR8U60P5

	To Download SBR8U60P5 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .