|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Oscilent Corporation IF SAW Filter | 835-IF32.7M-B Page 1 of 3 IF SAW Filter Part Number Package Application Last Modified 835-IF32.7M-B . TYPE : 35.0 x 12.8 Thru Hole Base Station & Repeater Jan. 01, 2007 32.7 MHz Bandpass Filter PART NUMBER : 835-IF32.7M-B .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Insertion Loss at Fo Storage Temperature Operating Temperature Source Impedance (single ended)* Load Impedance (single ended)* Temperature Coefficient Amplitude Ripple (29.7~ 35.7 MHz) Phase Linearity (29.7~ 35.7 MHz) Bandwidth at 3.0 dB Bandwidth at 40.0 dB Ultimate Rejection Group Delay Variation Adsolute Delay at Fo Minimum -40 -40 6.6 50 Typical 32.7 27.5 50 50 -72 0.55 3.2 7.05 7.97 55 60 3.68 Maximum 30.0 +85 +85 1.0 4.0 8.3 100 Units MHz dB C C ohm ohm ppm/C dBp-p deg MHz MHz dB ns us * with Matching Network (Ref. Testing Environment Circut as shown below). Those impedances could be modified with different impedances values and/or structures, if necessary. ** Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) Oscilent Corporation IF SAW Filter | 835-IF32.7M-B Page 2 of 3 PIN Descriptions: IN-1, OUT 5, GROUND -2,3,4,6,Case TEST ENVIRONMENT Source & Load Impedance: 50 ohm FREQUENCY RESPONSE Part No.: 835-IF32.7M-B Oscilent Corporation IF SAW Filter | 835-IF32.7M-B Page 3 of 3 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map |
Price & Availability of 835-IF327M-B |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |