View AZ2732-560-2_4659148.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

AZ732
MINIATURE POWER RELAY
FEATURES * Dielectric strength 4000 Vrms coil to contact * Isolation spacing greater than 8 mm * Approvals/Standards include: UL, VDE, IEC, SEMKO, CEE * Double pole -- Forms A, B, C, available * 10 Amp switching * SLIMPAKTM version saves board space * Epoxy sealed version for automatic wave soldering and cleaning * UL, CUR file E44211; VDE 4120-4940-4002/A1
CONTACTS
Arrangement Ratings DPDT (2 Form C) Resistive load: Max. switched power: 300 W or 2770 VA Max. switched current: 10 A, 51 A for 2 ms Max. switched voltage: 150* VDC or 400 VAC UL Rating:10 A at 30 VDC or 277 VAC 1/8 HP 120 VAC motor load
*Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory.
GENERAL DATA
Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 30 million 1 x 105 at 10 A 30 VDC 1 x 105 at 10 A 115 VAC 7 ms at nominal coil voltage 2 ms at nominal coil voltage (with no coil suppression)
Material Resistance
Silver cadmium oxide < 30 milliohms initially (at rated current, voltage drop method)
Dielectric Strength 4000 Vrms contacts to coil (at sea level for 1 min.) 2500 Vrms contact to contact 1000 Vrms between open contacts Insulation Resistance Dropout Ambient Temperature Operating 10,000 megohms min. at 20C, 500 VDC, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage Standard: -55C (-67F) to 70C (158F) Sensitive: -55C (-67F) to 80C (176F) Both: -55C (-67F) to 110C (230F) 0.062" DA at 10-55 Hz 20 g P.B.T. polyester Tinned copper alloy, P.C. 270C (518F) 5 seconds 80C (176F) 30 seconds 20 grams
COIL
Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Standard coil: 337 mW Sensitive coil: 250 mW 1.9 W at 20C (68F) ambient 1.4 W at 40C (104F) ambient Standard: 40C (72F) at nominal coil voltage Sensitive: 32C (58F) at nominal coil voltage Max. 110C (230F)
Storage Vibration Shock Enclosure Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp.
Temperature
NOTES
1. All values at 20C (68F). 2. Relay may pull in with less than "Must Operate" value. 3. Unsealed relays should not be dip cleaned. 4. Specifications subject to change without notice.
Max. Immersion Time Weight
7/26/02W
AZ732
RELAY ORDERING DATA
STANDARD RELAYS: 2 Form C (DPDT) Contacts COIL SPECIFICATIONS
Nominal Max. Coil Must Coil Continuous Resistance Operate VDC VDC 10% VDC 5 8 38 3.5 6 12 24 48 5 6 12 24 48 10 19 35 74 9 11 21 43 86 58 215 740 3,200 47 70 270 1,100 4,400 4.2 8.4 16.8 33.6 3.5 4.2 8.4 16.8 33.6
HARDWARE ORDERING DATA
DESCRIPTION
Socket Retaining Clip
ORDER NUMBER
ST484-U1 ST482-2
ORDER NUMBER*
Unsealed AZ732-125-2 AZ732-112-2 AZ732-08-2 AZ732-560-2 AZ732-04-2 AZ732-118-52 AZ732-509-52 AZ732-521-52 AZ732-053-52 AZ732-510-52 Sealed AZ2732-125-2 AZ2732-112-2 AZ2732-08-2 AZ2732-560-2 AZ2732-04-2
Maximum Switching Capacity
10.0
9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0
CURRENT
SENSITIVE RELAYS: 2 Form C (DPDT) Contacts
AZ2732-118-52 AZ2732-509-52 AZ2732-521-52 AZ2732-053-52 AZ2732-510-52
1.0
.9 .8 .7 .6 .5 .4 .3 .2
AC Resistive Load
DC Resistive Load
* Substitute "4 or 54," "6 or 56" in place of "2 or 52" to indicate 2 Form A and 2 Form B respectively.
VOLTAGE
INTERNATIONAL APPROVALS
Passed International Electrical Code IEC 380 Germany VDE VDE VDE VDE VDE 0860/8.81 paragraphs 10, 14 0806/8.81 paragraphs 7, 11, 15, 16, 29 0631/9.77 paragraphs 9, 12, 14 0730/T.1/3.72 paragraph 22 0435/9.72 (with production monitoring)
Coil Temperature Rise
Standard
170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 60% 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 140% 60%
Sensitive
Coil Temperature Rise C
U.S.A.
UL File E44211
Coil Temperature Rise C
8A 0A
80% 100% 120%
8A 0A
160% 80% 180% 100% 200% 120%
Percent of Nominal Coil Voltage (at 20C)
Percent of Nominal Coil Voltage (at 20C)
MECHANICAL DATA
1.11 MAX (28.1) .496 MAX (12.6)
PC BOARD LAYOUT
Viewed toward terminals
.500 (12.7)
HARDWARE
.177 (4.5) MAX
.354 (9.0)
1.03 (26.1)
.197 (5) .197 (5) .051 DIA (1.3) (8 HOLES) .591 (15)
1.28 (32.5) 1.22 (30.9) .414 (10.5) .125 DIA (10.5) .366 (9.3)
.154 (3.9) .024 (0.6) DIA
*
.016 .008 (0.4) (0.2) .040 (1.0)
.075 (1.9) .295 (7.5)
1.217 (30.9) .158 (4.0)
PC BOARD LAYOUT
.295 (7.5) .197 (5.0)
* SEALED VERSION STAND OFF .025 (0.6)
WIRING DIAGRAMS
2 FORM C (DPDT)
8 7 6 1 5 4 3 2 7 6 1 4 3 2 1 2
2 FORM B (DPST-NC)
8 7
2 FORM A (DPST-NO)
5 4
1.044 (26.5)
.792 (20.1)
.197 (5.0) .059 DIA (1.5)
.138 (3.5)
Viewed toward terminals
Dimensions in inches with metric equivalents in parentheses. Tolerance: .010"
RETAINING CLIP
.118 (3.0)
Viewed toward terminals
1000
10
100
.1
500 600 700 800 900
20
30
40 50 60 70 80 90
200
300
400
7/26/02W

▲Up To Search▲

Price & Availability of AZ2732-560-2

	To Download AZ2732-560-2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .