 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Unit type Ordering information PAA PAA150F R PAA 150 1 2 3 F 4 -5 5 -O 1Series name 2Output wattage 3Universal input 4Output voltage 5Optional C :with Coating G :Low leakage current N :with Cover R :with Remote ON/OFF Recommended Noise Filter NAC-06-472 High voltage pulse noise type : NAP series Low leakage current type : NAM series *The Noise Filter is recommended *to connect with several devices. MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT PAA150F-3 90 3V 30A PAA150F-5 150 5V 30A PAA150F-12 156 12V 13A PAA150F-15 150 15V 10A PAA150F-24 156 24V 6.5A PAA150F-48 158.4 48V 3.3A SPECIFICATIONS MODEL VOLTAGE[V] CURRENT[A] FREQUENCY[Hz] EFFICIENCY[%] ACIN 100V POWER FACTOR ACIN 200V ACIN 100V INRUSH CURRENT[A] ACIN 200V LEAKAGE CURRENT[mA] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] 0 to +50C *1 RIPPLE[mVp-p] -10 - 0C *1 0 to +50C *1 RIPPLE NOISE[mVp-p] -10 - 0C *1 0 to +50C TEMPERATURE REGULATION[mV] -10 to +50C *2 DRIFT[mV] START-UP TIME[ms] HOLD-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] OVERCURRENT PROTECTION OVERVOLTAGE PROTECTION OPERATING INDICATION REMOTE SENSING REMOTE ON/OFF *3 INPUT-OUTPUT -RC INPUT-FG *3 OUTPUT-RC-FG *3 OUTPUT-RC OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CONDUCTED NOISE HARMONIC ATTENUATOR CASE SIZE/WEIGHT COOLING METHOD ACIN 100V ACIN 200V PAA150F-3 PAA150F-5 PAA150F-12 PAA150F-15 PAA150F-24 AC85 - 264 1f or DC120 - 340 1.4typ 2.0typ 0.7typ 1.0typ 50/60 (47 - 63) 67typ 75typ 78typ 80typ 81typ 0.99typ (Io=100%) 0.95typ (Io=100%) 20typ (Io=100%) (At cold start) 40typ (Io=100%) (At cold start) 0.75max (60Hz, According to UL, CSA, VDE and DEN-AN) 3 5 12 15 24 30 30 13 10 6.5 20max 20max 48max 60max 96max 40max 40max 100max 120max 150max 80max 80max 120max 120max 120max 140max 140max 160max 160max 160max 120max 120max 150max 150max 150max 160max 160max 180max 180max 180max 50max 50max 120max 150max 240max 60max 60max 150max 180max 290max 20max 20max 48max 60max 96max 500max (ACIN 85V, Io=100%) 20typ (Io=100%) 2.85 - 3.6 t10% Works over 105% of rating and recovers automatically 4.00 - 5.25V Works at 115 - 140% of rating LED (Green) Provided Optional (Refer to Instruction Manual) AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (At Room Temperature) AC100V 1minute, Cutoff current = 100mA, DC100V 10MW min (At Room Temperature) -10 to +65C, 10 - 90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) -20 to +75C, 10 - 90%RH (Non condensing), 9,000m (30,000feet) max 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis 196.1m/s2 (20G), 11ms, once each X, Y and Z axis UL60950-1, EN60950-1, EN50178, CSA C22.2 No.234 Complies with DEN-AN and IEC60950-1 Complies with FCC-B, CISPR22-B, EN55022-B, VCCI-B Complies with IEC61000-3-2 65X93X199mm (without terminal block) (WXHXD) /900g max (without cover) Convection PAA150F-48 INPUT 81typ OUTPUT 48 3.3 192max 240max 150max 200max 400max 600max 480max 600max 192max PROTECTION CIRCUIT AND OTHERS ISOLATION max ENVIRONMENT SAFETY AND NOISE REGULATIONS OTHERS *1 *2 *3 * According to 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101). Drift is change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. Applicable when Remote ON/OFF(optional) is added. Derating is required when operated with cover. A-54 Distribution: RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de Anderungen vorbehalten / subject to change without notice PAA150F External view CN1(option) Short piece Cover name plate Voltage adjust LED PAA (18.5) 20max 199 12 +V +V -V -V FG AC(L) AC(N) (21.5) (12.5) (43.5) M4 10 +S 8.2 -S Cover (81) (11.5) (option) Terminal cover 4.5 + 125-0.5 40 Pin No. 1 2 Contents +RC -RC + 100-0.5 80 Mating Connector(Terminal) Mfr: J.S.T. XHP-2(BXH-001T-P0.6 or SXH-001T-P0.6) Weight: 900g or less(without cover) Cover is optional Tolerance+ 1 Mounting torque:1.2N . m(12.8kgf . cm)max 37.5 Name plate 7.5 Performance data RISE TIME & FALL TIME (PAA150F-5 ) EFFICIENCY (PAA150F-5) 80 78 EFFICIENCY 76 DC Output AC Input ACIN 100V Io=100% 74 Load factor100% Load factor 50% 50ms/DIV 72 60 100 140 180 220 25 260 4.5 + 25 -0.5 65 3-M4 Mounting hole 8 21 + 50-0.5 93 4-M4 Mounting hole 300 INPUT VOLTAGE V HARMOINC CURRENT (PAA150F-5) 10 INPUT HARMONIC CURRENT (PAA150F-5) 10 A HARMONIC CURRENT HARMONIC CURRENT 1 Load factor 100% Input voltage AC 100V A Harmonic current standard class A(at odd number) 1 Harmonic current standard class A(at odd number) Load factor 100% Input voltage AC 230V 0.1 0.1 0.01 0.01 0.001 0 10 20 30 40 0.001 0 10 20 30 40 HARMONIC ORDER HARMONIC ORDER Distribution: RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de A-55 Anderungen vorbehalten / subject to change without notice |
Price & Availability of PAA150F
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |