|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
FAMDM Series FAST / TTL Buffered 5-Tap Delay Modules Low Profile 8-Pin Package Two Surface Mount Versions FAST/TTL Logic Buffered 5 Equal Delay Taps Operating Temperature Range 0OC to +70OC 14-Pin Versions: FAIDM Series SIP Versions: FSIDM Series Low Voltage CMOS Versions refer to LVMDM / LVIDM Series FAMDM 8-Pin Schematic Vcc 8 Tap1 Tap3 Tap5 7 6 5 Electrical Specifications at 25OC FAST 5 Tap 8-Pin DIP P/N FAMDM-7 FAMDM-9 FAMDM-11 FAMDM-13 FAMDM-15 FAMDM-20 FAMDM-25 FAMDM-30 FAMDM-35 FAMDM-40 FAMDM-50 FAMDM-60 FAMDM-75 FAMDM-100 FAMDM-125 FAMDM-150 FAMDM-200 FAMDM-250 FAMDM-350 FAMDM-500 Tap Delay Tolerances +/- 5% or 2ns (+/- 1ns <13ns) Tap 1 Tap 2 Tap 3 Tap 4 Total - Tap 5 Tap-to-Tap (ns) 1 IN 2 3 4 GND Tap2 Tap4 3.0 3.0 3.0 3.0 3.0 4.0 5.0 6.0 7.0 8.0 10.0 12.0 15.0 20.0 25.0 30.0 40.0 50.0 70.0 100.0 4.0 4.5 5.0 5.5 6.0 8.0 10.0 12.0 14.0 16.0 20.0 24.0 30.0 40.0 50.0 60.0 80.0 100.0 140.0 200.0 5.0 6.0 7.0 8.0 9.0 12.0 15.0 18.0 21.0 24.0 30.0 36.0 45.0 60.0 75.0 90.0 120.0 150.0 210.0 300.0 6.0 7.5 9.0 10.5 12.0 16.0 20.0 24.0 28.0 32.0 40.0 48.0 60.0 80.0 100.0 120.0 160.0 200.0 280.0 400.0 7 1.0 9 1.0 11 1.0 13 1.5 15 1.5 20 2.0 25 2.0 30 2.0 35 2.0 40 2.0 50 2.5 60 3.0 75 3.75 100 5.0 125 6.25 150 7.5 200 10.0 250 12.5 350 17.5 500 25.0 1 0.5 1.5 0.5 2 0.7 2.5 1.0 3 1.0 4 1.5 5 2.0 6 2.0 7 2.0 8 2.0 10 2.0 12 2.0 15 2.5 20 3.0 25 3.0 30 3.0 40 4.0 50 5.0 70 5.0 100 10.0 ** These part numbers do not have 5 equal taps. Tap-to-Tap Delays reference Tap 1. TEST CONDITIONS -- FAST / TTL VCC Supply Voltage ................................................ 5.00VDC Input Pulse Voltage ................................................... 3.20V Input Pulse Rise Time ....................................... 3.0 ns max. Input Pulse Width / Period ........................... 1000 / 2000 ns 1. Measurements made at 25OC 2. Delay Times measured at 1.50V level of leading edge. 3. Rise Times measured from 0.75V to 2.40V. 4. 10pf probe and fixture load on output under test. DImensions in Inches (mm) .505 (12.83) MAX. .285 (7.24) MAX. .020 (0.51) .250 TYP. (6.35) MAX. .120 (3.05) MIN. .020 .050 (0.51) (1.27) TYP. TYP. .100 (2.54) TYP. DIP DIP .010 (0.25) TYP. OPERATING SPECIFICATIONS VCC Supply Voltage ................................... 5.00 0.25 VDC ICC Supply Current .................................... 48 mA Maximum Logic "1" Input: VIH ....................... 2.00 V min., 5.50 V max. IIH ............................... 20 A max. @ 2.70V Logic "0" Input: VIL .......................................... 0.80 V max. IIL ............................................ -0.6 mA mA VOH Logic "1" Voltage Out .................................. 2.40 V min. VOL Logic "0" Voltage Out ............................... 0.50 V max. PWI Input Pulse Width ............................. 40% of Delay min. Operating Temperature Range ............................ 0O to 70OC Storage Temperature Range ...................... -65O to +150OC .300 (7.62) .365 (9.27) MAX. .505 (12.83) MAX. .285 (7.24) MAX. .250 (6.35) MAX. .015 (0.38) TYP. G-SMD G-SMD .030 (0.76) TYP. .430 (10.92) .400 (10.16) .285 (7.24) MAX. .008 R (0.20) .010 (0.25) TYP. P/N Description FAMDM - XXX X .020 .050 (0.51) (1.27) TYP. TYP. .100 (2.54) TYP. Buffered 5 Tap Delay Molded Package Series: 8-pin DIP: FAMDM Total Delay in nanoseconds (ns) Lead Style: Blank = Thru-hole G = "Gull Wing" SMD J = "J" Bend SMD Examples: FAMDM-25G = 25ns (5ns per tap) 74F, 8-Pin G-SMD FAMDM-100 = 100ns (20ns per tap) 74F, 8-Pin DIP Specifications subject to change without notice. .505 (12.83) MAX. J-SMD .265 (6.73) MAX. .030 (0.76) TYP. J-SMD .285 (7.24) .260 (6.60) .330 (8.38) MAX. .020 R (0.51) .020 .050 (0.51) (1.27) TYP. TYP. .100 (2.54) TYP. For other values & Custom Designs, contact factory. FAMDM 9901 Rhombus Industries Inc. 15801 Chemical Lane, Huntington Beach, CA 92649-1595 Phone: (714) 898-0960 * FAX: (714) 896-0971 www.rhombus-ind.com * email: sales@rhombus-ind.com |
Price & Availability of FAMDM-200 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |