|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
DATA SHEET - NOVEMBER 2007 Integrated Microwave Transceiver RACK1122 0.05 - 18 GHz, 1550 nm Externally Modulated Transmitter with Receiver and Integrated AGC, Pre & Post Amps Applications Microwave Test Cell Antenna Signal Remoting Microwave Data Links Broadband Delay-Line and Signal Processing Systems Frequency Distribution Systems The Emcore RACK1122 is an integrated, 1 RU high-performance transceiver with guaranteed performance over the 0.05 - 18 GHz frequency band. It incorporates a high dynamic range externally modulated transmitter, RF preamplifier, optical receiver, RF post amplifier and optical AGC. It provides +6 dBm minimum of optical output power. The optical AGC provides fixed gain operation for a constant RF input power and varying optical link budgets. The unit can be used to construct transparent optical links for microwave test cell antenna remoting, microwave signal distribution, microwave delay lines, point-to-point data links and other applications where it is necessary to transport RF and microwave signals over long distances without signal degradation. The unit operates at a nominal optical wavelength of 1550 nm. Features Integrated externally modulated transmitter, preamp, receiver and post amp Optical AGC 0.05 - 18 GHz specified bandwidth High dynamic range 1 RU rack mount package Front panel RF and optical connections Specifications Electrical RF Connectors Frequency Range TX RF Input Power Input IP3 at 18 GHz Input P1dB at 18 GHz RX RF Output Power Range SMA (female, 50) 0.05 to 18 GHz -30 dBm, max -22 dBm, typical -28 dBm, typical -30 dBm, typical 1550 6 nm SC/APC +6 to +8 dBm < 0.5 dBm over temperature and time 0 to +6 dBm for AGC operation with constant RF output Self Contained 1 RU Housing, 19" Rack 1.75" H x 17" W x 14" D 110 VAC @ 100W Optical AGC Power, Link Status LED Optical Wavelength Connectors TX Optical Output Power Optical Power Stability RX Optical Input Power Physical Configuration Dimensions Power Requirements Operating/Storage Temperature 0C to +50C Interface and Control RF Gain Control Front Panel Indicators For more information on this and other products: Contact Sales at Emcore 626-293-3400, or visit www.emcore.com RACK1122 DATA SHEET - NOVEMBER 2007 Link Performance (with 0 to -6dBm at Receiver) Parameter Link Gain Input IP3 Spurious Free Dynamic Range Gain Variation Noise Figure Symbol G G IIP3 SFDR NF Condition @ 50 MHz @ 18 GHz @10 GHz @ 10 GHz 50 MHz to 18 GHz 50 MHz to 18 GHz Min -10 -15 Typ 0 -7 -22 98 7 20 Max Unit dB dB dBm dB/Hz2/3 dB dB Laser Safety Class IIIb Laser Product FDA/CDRH Class IIIb laser product. All transmitter versions are Class IIIB laser products per CDRH, 21 CFR 2040 Laser Safety requirements. All versions are Class 3B laser products per IEC*60825-1:1993. Maximum Power = 8 dBm Caution: Use of controls, adjustments and procedures other than those specified herein may result in hazardous laser radiation exposure. *IEC is a registered trademark of the International Electrotechnical Commission. EMCORE 2015 West Chestnut Street Alhambra, California 91803-1542 Tel: 626-293-3400 Fax: 626-293-3428 www.emcore.com For more information on this and other products: Contact Sales at Emcore 626-293-3400 or visit www.emcore.com (c) Copyright 2007, Emcore Corporation |
Price & Availability of RACK1122 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |