 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ELECTRONIC COMPONENTS RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de Anderungen vorbehalten / subject to change without notice 125W Triple Output with PFC Function Features : P P T- 1 2 5 series Universal AC input / Full range Built-in active PFC function Protections:Short circuit/Over load/Over voltage PWM control and regulated 3 High power density 6.117W/inch LED indicator for power on 100% full load burn-in test 125W with 18CFM FAN 5"x3" compact size 3 years warranty SPECIFICATION MODEL OUTPUT NUMBER DC VOLTAGE RATED CURRENT PPT-125A CH1 3.3V 10A CH2 5V 8A CH3 12V 0.5A PPT-125B CH1 5V 11.5A CH2 12V 3A CH3 -12V 0.5A PPT-125C CH1 5V 11A CH2 15V 2.5A CH3 -15V 0.5A PPT-125D CH1 5V 7A CH2 24V 2.5A CH3 12V 0.5A CURRENT RANGE (convection) 1 ~ 10A RATED POWER (convection) 79W OUTPUT RATED POWER (18CFM FAN) 98.8W VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVER LOAD PROTECTION OVER VOLTAGE WORKING TEMP., HUMIDITY WORKING TEMP. ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 0.8 ~ 8A 0.05 ~ 0.5A 1 ~ 11.5A 0.3 ~ 3A 99.5W 124.46W CH1:4.75 ~ 5.25V 3.0% 5.0% 0.5% 3.0% 0.5% 3.0% 0.05 ~ 0.5A 1 ~ 11A 100W 125.15W 0.25 ~ 2.5A 0.05 ~ 0.5A 1 ~ 7A 101W 126.43W 0.25 ~ 2.5A 0.05 ~ 0.5A CURRENT RANGE (18CFM FAN) 1 ~ 12.5A 0.8 ~ 10A 0.05 ~ 0.63A 1 ~ 14.38A 0.3 ~ 3.75A 0.05 ~ 0.63A 1 ~ 13.75A 0.25 ~ 3.13A 0.05 ~ 0.63A 1 ~ 8.75A 0.25 ~ 3.13A 0.05 ~ 0.63A RIPPLE & NOISE (max.) Note.2 100mVp-p 100mVp-p 120mVp-p 100mVp-p 120mVp-p 120mVp-p 100mVp-p 150mVp-p 150mVp-p 100mVp-p 240mVp-p 120mVp-p CH1:3.13 ~ 3.46V 3.0% 5.0% 0.5% 3.0% 0.5% 3.0% 6.0% 0.5% 5.0% 6.0% 0.5% 5.0% CH1:4.75 ~ 5.25V 3.0% 5.0% 0.5% 3.0% 0.5% 3.0% 6.0% 0.5% 5.0% CH1:4.75 ~ 5.25V 3.0% 5.0% 0.5% 3.0% 0.5% 3.0% 6.0% 0.5% 5.0% 1000ms, 30ms/230VAC 24ms/230VAC 90 ~ 264VAC 47~63Hz PF>0.93/230VAC 75% 2000ms, 30ms/115VAC at full load 24ms/115VAC at full load 127 ~ 370VDC PF>0.98/115VAC at full load 78% 78% 78% 1.7A/115VAC 0.75A/230VAC COLD START 24A/230VAC <2mA / 240VAC 130 ~ 160% rated output power Protection type : Fold back current limiting, recovers automatically after fault condition is removed CH1:3.6 ~ 4.45V CH1:5.75 ~ 6.75V CH1:5.75 ~ 6.75V Protection type : Hiccup mode, recovers automatically after fault condition is removed -20 ~ +70 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85 0.05%/ , 10 ~ 95% RH (0 ~ 50 CH1:5.75 ~ 6.75V 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC SAFETY & ISOLATION RESISTANCE EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B EMC (Note 4) HARMONIC CURRENT EMS IMMUNITY MTBF Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A 94.7Khrs min. MIL-HDBK-217F (25 ) 127*76.2*34.6mm (L*W*H) 0.37Kg; 36pcs/14.3Kg/0.91CUFT OTHERS DIMENSION PACKING NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:PPT-125-SPEC 2006-04-13 125W Triple Output with PFC Function Mechanical Specification 127 5 115.6 P P T- 1 2 5 series Unit:mm 6.4 SVR1 LED1 FS1 T2A 250VAC 1 2 3 CN1 1 2 3 4 5 6 7 8 9 10 CN4 76.2 64.8 43. Air flow direction 5 AC Input Connector (CN1) : JST B3P-VH or equivalent Pin No. 1 2 3 Assignment AC/L No Pin AC/N Mating Housing JST VHR or equivalent Terminal JST SVH-21T-P1.1 or equivalent 34.6 DC Output Connector (CN4) : JST B5P-VH*2 or equivalent Pin No. 1 2,3 4~8 9,10 Assignment CH3 CH2 GND CH1 Mating Housing JST VHR or equivalent Terminal JST SVH-21T-P1.1 or equivalent Derating Curve Output Derating VS Input Voltage 125 100 Forced air 18CFM 100 90 80 70 Free air Convection 70 LOAD (%) 50 40 20 LOAD(%) 0 10 20 30 40 50 60 70 (HORIZONTAL) 60 50 40 -20 85 100 115 135 155 264 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (V) 60Hz File Name:PPT-125-SPEC 2006-04-13 ELECTRONIC COMPONENTS RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de Anderungen vorbehalten / subject to change without notice |
Price & Availability of PPT-125
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |