![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only Features * High Intensity. * Popular T-1 3/4 diameter Package. * Selected minimum intensities. * Wide viewing Angle. * General purpose leads. * Reliable and rugged. Package Dimensions Part No. LTL-307E-1B1A Lens Red Diffused Source Color Hi.Eff.Red Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25mm(.010") unless otherwise noted. 3. Protruded resin under flange is 1.0mm(.04") max. 4. Lead spacing is measured where the leads emerge from the package. 5. Specifications are subject to change without notice. Part No. : LTL-307E-1B1A BNS-OD-C131/A4 Page : 1 of 5 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only Absolute Maximum Ratings at TA=25 Parameter Power Dissipation Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) Continuous Forward Current Derating Linear From 50 Reverse Voltage Operating Temperature Range Storage Temperature Range Lead Soldering Temperature [1.6mm(.063") From Body] Maximum Rating 100 120 30 0.4 5 -55 to + 100 -55 to + 100 260 for 5 Seconds Unit mW mA mA mA/ V Part No. : LTL-307E-1B1A BNS-OD-C131/A4 Page : 2 of 5 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only Electrical / Optical Characteristics at TA=25 Parameter Symbol Min. Typ. Max. Unit Test Condition IF = 10mA Note 1,4 Note 2 (Fig.6) Measurement @Peak (Fig.1) Note 3 Luminous Intensity IV 21/2 P d 5.6 19 mcd Viewing Angle 50 deg Peak Emission Wavelength 635 nm Dominant Wavelength 623 nm Spectral Line Half-Width 40 nm Forward Voltage VF 2.0 2.6 V A IF = 20mA Reverse Current IR 100 VR = 5V Capacitance C 20 pF VF = 0 , f = 1MHz Note: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commission International De L'Eclairage) eye-response curve. 2. 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3. The dominant wavelength, d is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 4. The Iv guarantee should be added 15% . Part No. : LTL-307E-1B1A BNS-OD-C131/A4 Page : 3 of 5 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only Typical Electrical / Optical Characteristics Curves (25 Ambient Temperature Unless Otherwise Noted) Part No. : LTL-307E-1B1A BNS-OD-C131/A4 Page : 4 of 5 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only Features * Compatible with radial lead automatic insertion equipment. * Most radial lead plastic lead lamps available packaged in tape and folding. * 5mm (0.197") formed lead spacing available. * Folding packaging simplifies handling and testing. Package Dimensions Specification Item Tape Feed Hole Diameter Component Lead Pitch Front to Rear Deflection Height of Seating Plane Feed Hole to Bottom of Component Feed Hole to Overall Component Height Lead Length After Component Height Feed Hole Pitch Lead Location Center of Component Location Total Tape Thickness Feed Hole Location Adhesive Tape Width Adhesive Tape Position Tape Width Part No. : LTL-307E-1B1A BNS-OD-C131/A4 Symbol D F H H H1 H2 L P P1 P2 T W0 W1 W2 W3 Minimum mm 3.8 4.8 -15.5 25.0 33.3 W0 12.4 3.15 5.05 -8.5 12.5 0 17.5 0.488 0.124 0.198 -0.334 0.492 0 0.689 Page : inch 0.149 0.188 -0.610 0.984 1.311 Maximum mm 4.2 5.8 2.0 16.5 26.5 35.4 11.0 13.0 4.55 7.65 0.90 9.75 13.5 3.0 19.0 5 inch 0.165 0.228 0.078 0.649 1.043 1.393 0.433 0.511 0.179 0.301 0.035 0.384 0.531 0.118 0.748 of 5 |
Price & Availability of LTL-307E-1B1A
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |