 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Super Fast Recovery Diode RFX10TF6S Series Ultra Fast Recovery Dimensions (Unit : mm) +0.3 -0.1 +0.3 -0.1 +0.2 -0.1 Structure Applications General rectification +0.4 -0.2 Features 1)Single type.(TO-220) 2)High switching speed 3)Soft Recovery (1) (3) +0.1 -0.05 Construction Silicon epitaxial planer Absolute maximum ratings (Tc=25C) Parameter Repetitive peak reverse voltage Reverse voltage Average rectified forward current Forward current surge peak Junction temperature Storage temperature 1.6MAX RFX10 TF6S (1) (3) Symbol VRM VR Io IFSM Tj Tstg Conditions Duty 0.5 Direct voltage 60Hz half sin wave, Resistance load, Tc=57C Limits 600 600 10 100 150 -55 to +150 Unit V V A A C C 60Hz half sin wave, Non-repetitive one cycle peak value, Tj=25C Electrical characteristics (Tj=25C) Parameter Symbol VF Forward voltage Reverse current Reverse recovery time Thermal Resistance IR trr Rth(j-c) Conditions IF=10A VR=600V IF=0.5A,IR=1A,Irr=0.25xIR junction to case Min. - Typ. 2 0.15 16 - Max. 2.5 10 30 3.5 Unit V A ns C / W www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 1/3 2010.02 - Rev.A RFX10TF6S Electrical characteristics curves 100 Data Sheet 1000000 1000 Tj=150C Tj=125C Tj=125 FORWARD CURRENT : IF(A) Tj=150 10 100000 f=1MHz Tj=25C CAPACITANCE BETWEEN TERMINALS : Ct(pF) 600 REVERSE CURRENT : IR(nA) 10000 Tj=75C 1000 Tj=25C 100 Tj=25 Tj=75 1 100 10 0.1 0 1000 2000 3000 4000 5000 1 0 100 200 300 400 500 10 0 5 10 15 20 25 30 FORWARD VOLTAGE : VF(mV) VF-IF CHARACTERISTICS REVERSE VOLTAGE : VR(V) VR-IR CHARACTERISTICS REVERSE VOLTAGE : VR(V) VR-Ct CHARACTERISTICS 2300 1000 250 FORWARD VOLTAGE : VF(mV) 100 CAPACITANCE BETWEEN TERMINALS : Ct(pF) 2200 REVERSE CURRENT : IR(nA) T=25C IF=10A n=20pcs T=25C VR=600V n=20pcs 240 Ta=25C f=1MHz VR=0V n=10pcs 230 2100 AVE : 140.3nA 220 AVE : 224.6pF 210 2000 10 1900 AVE : 1976mV 1800 1 200 VF DISPERSION MAP IR DISPERSION MAP Ct DISPERSION MAP 200 30 1000 T=25C IF=0.5A IR=1A Irr=0.25xIR n=10pcs RESERVE RECOVERY TIME : trr(ns) ITS ABILITY OF PEAK SURGE FORWARD CURRENT : IFSM(A) 150 PEAK SURGE FORWARD CURRENT : IFSM(A) 25 20 15 10 AVE : 15.8ns 100 AVE : 163.5A 100 10 50 IFSM 8.3ms 1cyc IFSM 8.3ms 8.3ms 5 0 1cyc. 1 1 10 100 0 IFSM DISRESION MAP trr DISPERSION MAP NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 10 1000 10 8 IFSM time 100 6 AVE : 5.80kV 4 AVE : 1.08kV 2 TRANSIENT THAERMAL IMPEDANCE : Rth (C/W) PEAK SURGE FORWARD CURRENT : IFSM(A) ELECTROSTATIC DISCHARGE TEST ESD(KV) Rth(j-c) 1 10 1 10 100 0 C=200pF R=0 C=100pF R=1.5k 0.1 0.001 0.01 0.1 1 10 100 1000 TIME : t(ms) IFSM-t CHARACTERISTICS ESD DISPERSION MAP TIME : t(s) Rth-t CHARACTERISTICS www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 2/3 2010.02 - Rev.A RFX10TF6S 45 D.C. 40 35 D=0.8 D=0.5 half sin wave D=0.2 D=0.1 20 15 10 5 0 0 3 6 9 12 15 18 D=0.05 14 D=0.8 16 D.C. 0A 0V t Io VR D=t/T VR=480V Tj=150C Data Sheet AVERAGE RECTIFIED FORWARD CURRENT : Io(A) T 12 10 FORWARD POWER DISSIPATION : Pf(W) D=0.5 30 25 half sin wave 8 6 4 2 0 0 30 60 90 120 150 D=0.2 D=0.1 D=0.05 AVERAGE RECTIFIED FORWARD CURRENT : Io(A) Io-Pf CHARACTERISTICS CASE TEMPARATURE : Tc(C) Derating Curve"(Io-Tc) www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 3/3 2010.02 - Rev.A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2010 ROHM Co., Ltd. All rights reserved. R1010A |
Price & Availability of RFX10TF6S
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |