![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Tyco / Electronics Raychem Circuit Protection 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 Fax: 800-227-4866 PolySwitch(R) PTC Devices Overcurrent Protection Device PRODUCT: MINISMDC014 DOCUMENT: SCD 24025 PCN: 941493 REV LETTER: L REV DATE: SEPTEMBER 12, 2001 PAGE NO.: 1 OF 1 Specification Status: RELEASED Maximum Electrical Rating Voltage: 60V DC Current: 10A Notes: 1. All terminations are tin/lead plated. 2. Devices can be wave soldered. 3. Drawing not to scale Marking: Manufacturer's Mark 14 Part Identification TABLE I. DIMENSIONS: A MIN 4.37 MAX 4.73 MIN 0.635 B MAX 0.890 MIN 3.07 C MAX 3.41 MAX mm 0.50 : in: (0.172) (0.186) (0.025) (0.035) (0.121) (0.134) (0.012) (0.010) (0.020) D MIN 0.30 E MIN 0.25 TABLE II. PERFORMANCE RATINGS: CURRENT RATINGS** TIME TO TIME TO TRIP ** TRIP ** @ 1.5A @ 8.0A SECONDS SECONDS AT 20C AT 20C 0.150 0.008 RESISTANCE VALUES OHMS AT 20C MIN MAX* 1.50 6.00 POWER DISSIPATION WATTS AT 20C MAX 0.75 AMPERES AT - 40C HOLD 0.23 AMPERES AT 20C HOLD 0.140 AMPERES AT 60C HOLD 0.090 * Maximum resistance is measured 1 hour after reflow. **Values Specified were determined using PCB's with 0.030"X1.5 ounce copper traces. Reference Documents: Precedence: Effectivity: CAUTION: PS300, E. N. SMD1.0x This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. |
Price & Availability of MINISMDC014
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |