View AGOF5S3_4560977.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. www.conwin.com
PRODUCT
D ATA
SHEET
CRYSTAL CONTROLLED OSCILLATORS 14 PIN DIP 5.0V STRATUM 3 HCMOS OCXO
CW 0107 AGOF5S3 12.800M
ABSOLUTE MAXIMUM RATINGS
PARAMETER Storage Temperature Supply Voltage (Vcc) UNITS MINIMUM -40 -0.5 NOMINAL MAXIMUM 85 7.0 UNITS C Vdc
TABLE 1.0 NOTE
AGOF5S3
TABLE 2.0 NOTE 1 2 3 4
OPERATING SPECIFICATIONS
PARAMETER Center Frequency Frequency Calibration Frequency Stability Aging (Daily) Aging (20 Years) Total Frequency Tolerance Operating Temperature Range Supply Voltage Supply Current Phase Jitter (BW=12KHz to 20MHz) Phase Jitter (BW=10Hz to 20MHz) Period Jitter SSB Phase Noise at 10Hz offset SSB Phase Noise at 10KHz offset Start Up Time: Oscillator Warm Up Time TDEV @ 1.0 Sec. TDEV @ 4.0 Sec. (Vcc) (Icc) (Fo) MINIMUM 1.544 -1.5 -0.25 -30 -2.5 -4.6 0 4.75 NOMINAL 5.0 -90 -135 MAXIMUM 20.0 1.5 0.25 30 2.5 4.6 70 5.25 300 1 3 3 10 5 1 2 UNITS MHz ppm ppm ppb ppm ppm C Vdc mA ps rms ps rms ps rms dBc/Hz dBc/Hz mS Minutes nS nS
DESCRIPTION
The Connor-Winfield AGOF5S3 is a hermetically sealed 14 Pin DIP, 5.0V Oven Controlled Crystal Oscillator (OCXO) HCMOS/TTL compatible output. The AGOF5S3 is designed for higher stability Stratum 3 applications requiring low jitter and tight frequency stability.
5
HCMOS OUTPUT CHARACTERISTICS
PARAMETER LOAD Voltage (High) (Low) (High) (Low) Duty Cycle at 50% of Vcc Rise / Fall Time 10% to 90% Current MINIMUM 4.5 -4 45 NOMINAL 50 MAXIMUM 15 0.4 4 55 6 UNITS pf Vdc Vdc mA mA % nS
FEATURES
TABLE 3.0 NOTE
5.0V OPERATION FIXED FREQUENCY LOW JITTER <1pS RMS FREQUENCY STABILITY 0.25ppm
TABLE 4.0
(Voh) (Vol) (Ioh) (Ioh)
PACKAGE CHARACTERISTICS
Package
14 pin DIP, hermetically sealed, grounded case, welded package
OVERALL FREQUENCY TOLERANCE OF 4.6ppm OVER TWENTY YEARS TEMPERATURE RANGE: 0 to 70C
Notes: 1) 2) 3) 4)
Initial calibration @ 25C Frequency vs. temperature stability At the time of shipment after 48 hours of operation. Inclusive of calibration, operating temperature range, supply voltage change, load change, shock and vibration, 20 years aging. 5) Measured @ 25C, within 5 minutes, the unit will be within +/-0.1ppm of its reference frequency, measured after 30 minutes of continuous operation at a stable 25 C
ORDERING INFORMATION
AGOF5S3
OCXO SERIES
- 12.800MHz
CENTER FREQUENCY
Specifications subject to change without notice. DATA SHEET #: Cx017 PAGE 1 OF 2 REV: 02 DATE: 7/22/03
aCopyright 2001 Connor-Winfield all rights reserved.
THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. www.conwin.com
PRODUCT
D ATA
SHEET
CRYSTAL CONTROLLED OSCILLATORS
ENVIRONMENTAL CHARACTERISTICS Temperature Cycle: Per MIL-STD-883, Method 1010, Condition B. -55C to 125C, 20 cycles,10 minute dwell, 1m inute transition. Gross Leak Test: Per MIL-STD-202, Method 112, Condition D. No bubbles in flourinert (FC-43) at 125C 5C for 20 seconds. SOLDERING Pin Solderability: Per MIL-STD-883, Method 200. 8 hour steam age prior to 254C 5C Solder pot dip, 95% Coverage. Resistance to Solder Heat: Per MIL-STD-202, Method 210, Condition C. Wave: Topside board -mount product, 260C 5C for 20 Seconds. MECHANICAL CHARACTERISTICS Vibration: Per MIL-STD-202, Method 204, Condition A. 10G's peak, 10Hz to 500Hz, 15mi nute cycles 12 times each perpendicular axis. Shock: Per MIL-STD-202, Method 213, Condition D. 500G's, 1ms, half sine, 3 shocks per direction. Moisture Resistance: Per MIL-STD-202, Method 106. 95% RH @ 65C, 10 cycles 10C to 65C.
+5.0Vdc
Specifications subject to change without notice. DATA SHEET #: Cx017 PAGE 2 OF 2 REV: 02 DATE: 7/22/03
aCopyright 2001 Connor-Winfield all rights reserved.

▲Up To Search▲

Price & Availability of AGOF5S3

	To Download AGOF5S3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .