View PSBI906_4548341.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ECO-PACTM 1 Rectifier Module for Power Factor Correction
Preliminary Data Sheet
Fast Single Phase Rectifier Ultra Fast Boost Chopper
PSBI 9/06
IFAV25 VRRM IC25 VCES
= 15A = 1200 V = 37A = 600 V
Typical Rectified Mains Power Pn = 900 W at Vn = 110 V Pn = 2100 W at Vn = 240 V at VDC = 400 V, fT = 75 kHz, TC = 80C
Input Rectifier Bridge
Features
Symbol
VRRM IFAV25 IFAV80 IFSM
Test Conditions
TC = 25C; TC = 80C; TVJ = 25C 180 sine 180 sine t = 10 ms
Maximum Ratings
1200 15 10 75 V A A A
(50 Hz), sine
Symbol
IR VF trr RthJC RthJS
Test Conditions
VR = VRRM, IF = 10A, TVJ = 25C TVJ = 125C TVJ = 25C TVJ = 125C
Characteristic Value
typ. 0.5 1.4 1.6 1 2.5 tbd 1.8 max. 0.05 mA mA V V s K/W K/W
VR = 100 V, IF = 10 A -di/dt = 5 A/s per diode with heat transfer paste
Chopper T
Symbol
VCES VGES IC25 IC80 RBSOA tSC
Test Conditions
TVJ = 25C to 150C continous TC = 25C; TC = 80C; VCE = 600 V, RG = 10 , TVJ = 125C Clamped inductive load, L= 100 H VCE = 600 V, RG = 10 , VGE = 15 V TVJ = 125C, non-repetitive
Maximum Ratings
600 20 37 25 ICM = 100 VCEK VCES V V A A A
* Package with DCB ceramic base plate and soldering pins for PCB mounting * Isolation voltage over 3000 V * Planar glasspassivated chips * high level of integrationonly one power semiconductor module required for the whole PFC rectifier * standard PFC control ICs usable * fast rectifier diodes for enhanced EMC behaviour * NPT IGBT with low saturation voltage, ultra fast switching capability, high RBSOA and short circuit ruggedness * internally series connected HiPerFRED free wheeling diode For fast and soft reverse recovery at high switching frequency * leads suitable for PC board soldering * UL registered, E 148688 Applications * single phase rectification with power factor correction (PFC) * low harmonic content of mains current * mains current and voltage in phase * wide input voltage range, controlled output voltage
10
s
POWERSEM GmbH, Walpersdorfer Str. 53 91126 D- Schwabach Phone: 09122 - 9764-0 Fax.: 09122 - 9764-20
2005 POWERSEM reserves the right to change limits, test conditions and dimensions
PSBI 9/06
Symbol
ICES IGES VCE(sat) VGE(th) td(on) tr td(off) tf Eon Eoff Cies QGon RthJC RthJS
Test Conditions
VCE = VCES, VGE = 0 V, VCE = 0 V, VGE = 20 V IC = 10A, VGE = 15 V IC = 1mA, VGE = VCE Inductive load, TVJ = 125C VCE = 400 V, IC = 10A RG = 10 , VGE = 15 V TVJ = 25C TVJ = 125C TVJ = 25C TVJ = 125C
Characteristic Value
typ. 1 1.5 1.6 min. 3 30 50 320 70 0.60 0.31 1600 140 0.96 tbd 100 1.8 5 max. 0.04 mA mA nA V V V ns ns ns ns mJ mJ pF nC K/W K/W
+0,3 -0,3
Package style and outline
Dimensions in mm (1mm = 0.0394")
VCE = 25 V, VGE = 0 V, f= 1 MHz VCE = 480 V, VGE = 15 V, IC = 10A with heat transfer paste
Chopper D
Symbol
VRRM IF25 IF80
Test Conditions
TC = 25C; TC = 80C; 180 sine 180 sine
Maximum Ratings
600 35 22 V A A
Symbol
IR VF IRM trr RthJC RthJS Module
Test Conditions
VR = VRRM, TVJ = 25C TVJ = 125C IF = 10A, TVJ = 25C TVJ = 125C
Characteristic Value
typ. 0.1 2.2 tbd tbd 1.15 tbd 3.2 2.4 max. 0.1 mA mA V V A s K/W K/W
IF = 10A, -diF/dt = 400 A/s, TVJ = 125C VR = 400 V with heat transfer paste
Symbol
TVJ Tstg VISOL MD
Test Conditions
Maximum Ratings
-40...+150 -40...+125 C C V~ Nm
IISOL 1 mA, 50/60 Hz, t= 1 min Mounting torque (M4)
3000 1.5-1.8
Symbol
dS, dA Weight
Test Conditions
pin to heatsink
Characteristic Value
typ. 16 min. 11.2 mm g
POWERSEM GmbH, Walpersdorfer Str. 53 91126 D- Schwabach Phone: 09122 - 9764-0 Fax.: 09122 - 9764-20
2005 POWERSEM reserves the right to change limits, test conditions and dimensions

▲Up To Search▲

Price & Availability of PSBI906

	To Download PSBI906 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .