|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only SURFACE MOUNT LED TAPE AND REEL Pb Lead-Free Parts LSIR9033/TR1 DATA SHEET DOC. NO REV. DATE : QW0905-L SIR9033/TR1 :E : 26 - Dec - 2005 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LSIR9033/TR1 Page 1/7 Package Dimensions Cathode 4.6O 0.5 2.5 0.4O 0.1 0.5O 2.0 0.1 r 1.9 1.4 2.8 0.16 0.7 0.4 Note : 1.All dimension are in millimeter tolerance is O 0.2mm unless otherwise noted. 2.Specifications are subject to change without notice. Carrier Type Dimensions 4.0 2.16 0.3 9.3 12 O 0.3 5.5 4.85 Polarity 1.75 4.0 3.32 2.0 1.5 Note : The tolerances unless mentioned is O 0.2mm,Angle O 0.5. Unit=mm. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LSIR9033/TR1 Page 2/7 Reel Dimensions 16.0O 1.0 r 178O 2.0 14.2O 1.0 74.0O 1.5 Description 12.0mm tape,7"reel Quantity/Reel 1500 devices Features: 1. High radiant intensity. 2. Suitable for pulsed applications. 3. Low average degradation. Descriptions: The LSIR9033/TR1 series are super-high efficiency Gallium Aluminum Arsenide infrared emitting diodes encapsulated in water clear plastic T-1 3/4 package individually Device Selection Guide: PART NO LSIR9033/TR1 MATERIAL GaAIAs LENS COLOR Water Clear LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LSIR9033/TR1 Page 3/7 Absolute Maximum Ratings at Ta=25 J Ratings Parameter Symbol SIR Power Dissipation Peak Forward Current (300PPS,1g s Pulse) Forward Current Reverse Voltage Electrostatic Discharge Operating Temperature Storage Temperature Soldering Temperature PD IFP IF Vr ESD Topr Tstg Tsol 100 1 50 5 UNIT mW A mA V 2000 -55 ~ +100 -55 ~ +100 Max 260J for 5 sec Max (2mm from body) V J J Electrical Optical Characteristics (Aa=25J) PARAMETER Radiant Intensity Aperture Radiant Incidence Peak Emission Wavelength Spectral Line Half Width Forward Voltage Reverse Current Viewing Angle SYMBOL Le Ee Min. 1.2 0.15 Typ. 2.0 0.3 880 70 1.4 Max. UNIT mW/sr mW/cm nm nm 2 TEST CONDITION IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA VR=5V f peak f VF IR 2c 1/2 1.7 100 V g A deg 20 Note : 1.The forward voltage data did not including O 0.1V testing tolerance. 2. The radiant intensity data did not including O 15% testing tolerance. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LSIR9033/TR1 Page 4/7 Typical Electro-Optical Characteristics Curve SIR CHIP Fig.1 Forward Current vs. Rorward Voltage 1000 Fig.2 Relative Radiant Intensity vs. Wavelength 1.0 100 10 1 0.1 0.5 Relative Radiant Intensity Normalize @20mA Forward Current(mA) 0.5 1.0 1.5 2.0 2.5 0.0 750 800 850 900 950 1000 1050 Forward Voltage(V) Wavelength(nm) Fig.3 Relative Radiant Power vs. Forward DC Current 10.0 Fig.4 Relative Radiant Power vs. Forward Peak Current 10.0 Relative Radiant Power Normalize @20mA Relative Radiant Power Normalize @100 mA 10 100 1.0 1.0 0.1 1 0.1 10 100 1000 IFDC(mA) IFPK(mA) Fig.5 Forward DC Voltage vs. Temperature Forward DC Voltage @20 mA Normalize @ 25 J 1.2 Fig.6 Relative Radiant Power vs. Temperature 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -40 1.1 1.0 0.9 0.8 -40 -20 0 20 40 60 80 100 Relative Radiant Power Normalize @ 20mA,25J -20 0 20 40 60 80 100 Ambient Temperature[J] Ambient Temperature[J] LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LSIR9033/TR1 Recommended Soldering Conditions 1. Hand Solder Basic spec is O 280J 3 sec one time only. Page 5/7 2. Wave Solder Soldering heat Max. 260J 245O within 5 sec 5J Preheat 120 ~ 150J 120 ~ 180 sec 3-1. LEAD Reflow Solder Temp. (J) 240 Rising +5J/sec Cooling -5J/sec 150 120 Preheat 60 ~ 120 sec 5sec Time 3-2 PB-Free Reflow Solder 1~5XC/sec 260XC MaX. 10sec.Max Preheat 180~200XC 1~5XC/sec Above 220XC 60 sec.Max. 120 sec.Max. Reflow Soldering should not be done more than two times. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LSIR9033/TR1 Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5 J~35J,RH60%. 2.Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life, we suggest our customers to use our products within a year(from production date). 3.If opened more than one week in an atmosphere 5 J ~ 35J,RH60%, 5 they should be treated at 60JO Jfo r 15hrs. Page 6/7 Drive Method: LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series with the LED. Consider worst case voltage variations than could occur across the current limiting resistor. The forwrd current should not be allowed to change by more than 40 % of its desired value. Circuit model A LED Circuit model B LED (A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED. Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED. ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LSIR9033/TR1 Page 7/7 Reliability Test: Test Item Test Condition 1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) Description This test is conducted for the purpose of detemining the resisance of a part in electrical and themal stressed. Reference Standard MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 Operating Life Test High Temperature Storage Test 1.Ta=105 JO 5J 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under ondition of high temperature for hours. MIL-STD-883:1008 JIS C 7021: B-10 Low Temperature Storage Test 1.Ta=-40 JO 5J 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. JIS C 7021: B-12 High Temperature High Humidity Test 1.Ta=65JO 5J 2.RH=90 %~95% 2hrs 3.t=240hrs O The purpose of this test is the resistance of the device under tropical for hous. MIL-STD-202:103B JIS C 7021: B-11 Thermal Shock Test 1.Ta=105 JO 5J&-40JO 5J (10min) (10min) 2.total 10 cycles The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 Solder Resistance Test 5J 1.T.Sol=260 JO 2.Dwell time= 10 O 1sec. MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 Solderability Test 1.T.Sol=230 JO 5J 2.Dwell time=5 O 1sec This test intended to see soldering well performed or not. MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 |
Price & Availability of LSIR9033-TR1 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |