 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| LBA716 Dual Single-Pole OptoMOS(R) Relay Parameter Load Voltage Load Current Max On-resistance Rating 60 1 0.4 Units V A Description LBA716 is 60V, 1A, 0.4 dual Solid State Relay integrating independent 1-Form-A and 1-Form-B relays into a single package. It features a superior combination of low on-resistance and enhanced peak load current (5A max.) handling capability. Features * 100% Solid State * Small 8-Pin Package * Low Drive Power Requirements (TTL/CMOS Compatible) * Arc-Free With No Snubbing Circuits * 3750Vrms Input/Output Isolation * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Surface Mount Versions * Tape & Reel available Approvals * UL Recognized Component: File # E76270 * CSA Certified Component: Certificate # 1175739 * EN/IEC 60950-1 Compliant Applications * Telecommunications * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Utility Meters (gas, oil, electric and water) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Ordering Information Part # LBA716 LBA716S LBA716STR Description 8-Pin DIP (50/Tube) 8-Pin Surface Mount (50/Tube) 8-Pin Surface Mount (1000/Reel) Switching Characteristics of Normally Open (Form A) Devices CONTROL ILOAD + 90% 10%+ TON TOFF Pin Configuration + Control - Normally Closed - Control - Normally Closed + Control - Normally Open - Control - Normally Open 1 2 3 4 8 7 6 5 Normally Open Normally Closed Switching Characteristics of Normally Closed (Form B) Devices CONTROL + ILOAD 90% TON +10% TOFF Pb RoHS 2002/95/EC e3 www.clare.com 1 DS-LBA716-R01 LBA716 Absolute Maximum Ratings Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 2 Ratings 60 5 50 1 150 800 3750 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 1.33 mw/C Derate Linearly 6.67 mw/C Electrical absolute maximum ratings are at 25C Electrical Characteristics Parameter Output Characteristics @ 25C Load Current Continuous Peak On-resistance Off-State Leakage Current Output Capacitance Switching Speeds Turn-On Turn-Off Load Current Continuous Peak On-resistance Off-State Leakage Current Output Capacitance Switching Speeds Turn-On Turn-Off Input Characteristics @ 25C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Current Common Characteristics @ 25C Capacitance, Input to Output t < 10ms IL=0.5A VL=60V, IF=5mA IF=5mA, 50V, f=1MHz IF=5mA, VL=10V IL ILPK RON ILEAK COUT tON tOFF 1.63 280 0.58 0.76 0.5 1.2 2 1 5 5 A A pF t < 10ms IL=1A VL=60V 50V, f=1MHz IL ILPK RON ILEAK COUT 0.21 105 0.7 0.09 1 5 0.4 1 5 5 A A pF Conditions Symbol Min Typ Max Units Form-A (Normally Open) Characteristics tON tOFF Form-B (Normally Closed) Characteristics IF=5mA, VL=10V ms ms Form-A and Form-B Characteristics IL=Load Current IF IF IF=5mA VF VR=5V IR CI/O 0.1 0.9 - 1.2 3 2 1.4 10 - mA mA V A pF *NOTE: If both poles operate simultaneously load current must be derated so as not to exceed the package power dissipation value. 2 www.clare.com R01 LBA716 PERFORMANCE DATA* 1-Form-A & 1-Form-B Relays Typical LED Forward Voltage Drop (N=50, TA=25C, IF=5mA) 1-Form-A Relay Typical On-Resistance (N=50, TA=25C, IL=1A, IF=5mA) 1-Form-B Relay Typical On-Resistance (N=50, TA=25C, IL=5mA, IF=0mA) 30 25 Device Count (N) 25 20 15 10 5 0 20 Device Count (N) 20 15 10 5 0 1.220 1.225 1.230 1.235 1.240 1.245 LED Forward Voltage Drop (V) Device Count (N) 0.206 0.207 0.208 0.209 0.210 On-Resistance () 0.211 15 10 5 0 1.49 1.53 1.57 1.61 1.65 On-Resistance () 1.69 20 1-Form-A Relay Typical Blocking Voltage (N=50, TA=25C) 20 1-Form-B Relay Typical Blocking Voltage (N=50, TA=25C, IF=5mA) 20 1-Form-A Relay Typical IF for Switch Operation (N=50, TA=25C, IL=200mA) Device Count (N) Device Count (N) Device Count (N) 15 15 15 10 10 10 5 5 5 0 65.5 66.0 66.5 67.0 67.5 Blocking Voltage (VP) 68.0 0 75 76 77 78 79 Blocking Voltage (VP) 80 0 0.65 0.69 0.73 0.77 0.81 LED Forward Current (mA) 0.85 25 20 15 10 5 0 1-Form-B Relay Typical IF for Switch Operation (N=50, TA=25C, IL=200mA) 25 20 15 10 5 0 1-Form-A Relay Typical Turn-On Time (N=50, TA=25C, IL=100mA, IF=5mA) 20 Device Count (N) 1-Form-A Relay Typical Turn-Off Time (N=50, TA=25C, IL=100mA, IF=5mA) Device Count (N) Device Count (N) 15 10 5 0.16 0.17 0.18 0.19 0.20 0.21 0 0.57 0.61 0.65 0.69 0.73 Turn-Off Time (ms) 0.77 0.077 0.082 0.087 0.092 0.097 Turn-On Time (ms) 0.102 LED Forward Current (mA) 20 1-Form-B Relay Typical Turn-On Time (N=50, TA=25C, IL=100mA, IF=5mA) 25 20 15 10 5 0 1-Form-B Relay Typical Turn-Off Time (N=50, TA=25C, IL=100mA, IF=5mA) Device Count (N) 15 10 5 0 0.507 0.530 0.553 0.576 0.599 Turn-On Time (ms) 0.622 Device Count (N) 0.63 0.67 0.71 0.75 0.79 Turn-Off Time (ms) 0.83 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R01 www.clare.com 3 LBA716 PERFORMANCE DATA* Form-A Relay Typical Load Current vs. Temperature (IF=5mA) Leakage Current (nA) 1.2 1.0 Load Current (A) 0.8 0.6 0.4 0.2 0.0 20 1-Form-A Relay Typical Leakage vs. Temperature Measured Across Pins 5 & 6 (VL=60V) Blocking Voltage (VP) 1-Form-A Relay Typical Blocking Voltage vs. Temperature 70 69 68 67 66 65 64 63 62 -40 -20 0 20 40 60 Temperature (C) 80 100 15 10 5 -40 -20 0 20 40 60 Temperature (C) 80 100 0 -40 -20 0 20 40 60 Temperature (C) 80 100 2.5 Turn On Time (ms) 1-Form-A Relay Typical Turn-On vs. Temperature (IL=100mA) IF=2mA 90 85 Turn Off Time (s) 80 75 70 65 60 55 1-Form-A Relay Typical Turn-Off vs. Temperature (IL=100mA) 1200 1000 Turn-On (s) 1-Form-A Relay Typical Turn-On vs. LED Forward Current (IL=100mA) 2.0 IF=5mA 800 600 400 200 0 1.5 IF=2mA 1.0 IF=5mA 0.5 -40 -20 0 20 40 60 Temperature (C) 80 100 50 -40 -20 0 20 40 60 Temperature (C) 80 100 0 10 20 30 40 LED Forward Current (mA) 50 77.8 77.7 Turn-Off Time (s) 77.6 77.5 77.4 77.3 77.2 77.1 1-Form-A Relay Typical Turn-Off vs. LED Forward Current (IL=100mA) AC On-Resistance () 0.26 0.24 0.22 0.20 0.18 0.16 0.14 0.12 -40 1-Form-A Relay Typical On-Resistance (AC) vs. Temperature (IL=500mA, IF=5mA) LED Current (mA) 0.95 0.90 0.85 0.80 0.75 0.70 -40 1-Form-A Relay Typical IF for Switch Operation vs. Temperature (IL=200mA) 0 10 20 30 40 LED Forward Current (mA) 50 -20 0 20 40 60 Temperature (C) 80 100 -20 0 20 40 60 Temperature (C) 80 100 1.0 1-Form-A Relay Typical Load Current vs. Load Voltage (TA=25C, IF=5mA) 1-Form-A Relay Energy Rating Curve 6 5 0.5 Current (A) Load Current (A) 4 3 2 1 0.0 -0.5 -1.0 -0.20 -0.15 -0.10 -0.05 0.00 0.05 0.10 0.15 0.20 Voltage (V) 0 10s 100s 1ms 10ms 100ms Time 1s 10s 100s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R01 LBA716 PERFORMANCE DATA* Form-B Relay Typical Load Current vs. Temperature (IF=0mA) Leakage Current (nA) 0.6 0.5 Load Current (A) 0.4 0.3 0.2 0.1 0.0 350 300 250 200 150 100 50 0 -40 1-Form-B Relay Typical Leakage vs.Temperature Measured Across Pins 7&8 (IF=5mA, VL=60V) Blocking Voltage (VP) 94 92 90 88 86 84 82 1-Form-B Relay Typical Blocking Voltage vs. Temperature (IF=5mA) -40 -20 0 20 40 60 Temperature (C) 80 100 -20 0 20 40 60 Temperature (C) 80 100 80 -40 -20 0 20 40 60 Temperature (C) 80 100 800 700 Turn-On Time (s) 1-Form-B Relay Typical Turn-On vs. Temperature (IL=100mA) Turn-Off Time (ms) 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 1-Form-B Relay Typical Turn-Off vs. Temperature (IL=100mA) 423 422 1-Form-B Typical Turn-On vs. LED Forward Current (IL=100mA) 600 500 400 300 200 100 -40 -20 0 IF=5mA IF=2mA IF=2mA Turn-On Time (s) 421 420 419 418 417 IF=5mA 20 40 60 Temperature (C) 80 100 -40 -20 0 20 40 60 Temperature (C) 80 100 0 10 20 30 40 LED Forward Current (mA) 50 2.5 Turn-Off Time (ms) 2.0 1.5 1.0 0.5 0 1-Form-B Relay Typical Turn-Off vs. LED Forward Current (IL=100mA) 1.8 1.7 On-Resistance () 1.6 1.5 1.4 1.3 1.2 1-Form-B Relay Typical On-Resistance vs. Temperature (IL=100mA, IF=0mA) 0.40 0.35 LED Current (mA) 0.30 0.25 0.20 0.15 0.10 -40 1-Form-B Relay Typical IF for Switch Operation vs. Temperature (IL=100mA) 0 10 20 30 40 50 1.1 -40 -20 0 LED Forward Current (ma) 20 40 60 Temperature (C) 80 100 -20 0 20 40 60 80 100 Temperature (C) 0.6 0.4 1-Form-B Relay Typical Load Voltage vs. Load Current (TA=25C, IF=0mA) 1-Form-B Relay Energy Rating Curve 1.5 1.3 Load Current (A) 1.1 0.9 0.7 0.5 0.3 10s 100s 1ms 10ms 100ms Time Current (A) 0.2 0.0 -0.2 -0.4 -0.6 -1.0 -0.8 -0.5 -0.3 0.0 0.3 Voltage (V) 0.5 0.8 1.0 1s 10s 100s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R01 www.clare.com 5 LBA716 Manufacturing Information Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. Pb RoHS 2002/95/EC e3 PC Board Pattern MECHANICAL DIMENSIONS 8-Pin DIP Through-Hole Package 2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) 0.457 0.076 (0.018 0.003) 9.652 0.381 (0.380 0.015) 7.620 0.254 (0.300 0.010) 8-0.800 DIA. (8-0.031 DIA.) 2.540 0.127 (0.100 0.005) 9.144 0.508 (0.360 0.020) 9.144 TYP. (0.360 TYP.) 6.350 0.127 (0.250 0.005) 7.620 0.127 (0.300 0.005) 8.077 0.127 (0.318 0.005) 4.064 Typ (0.160 Typ) 3.302 (0.130) 7.239 TYP. (0.285) 7.620 0.127 (0.300 0.005) 0.889 0.102 (0.035 0.004) Dimensions mm (inches) 8-Pin Surface Mount Package 9.652 0.381 (0.380 0.015) 2.540 0.127 (0.100 0.005) 9.525 0.254 (0.375 0.010) 7.620 0.254 (0.300 0.010) 0.254 0.127 (0.010 0.0005) 4.445 0.127 (0.175 0.005) 3.302 (0.130) Recommended PCB Land Pattern 2.54 (0.10) 0.635 0.127 (0.025 0.005) 6.350 0.127 (0.250 0.005) 1.65 (0.0649) 8.90 (0.3503) 8.077 0.127 (0.318 0.005) 0.457 0.076 (0.018 0.003) 4.064 Typ (0.160 Typ) 0.65 (0.0255) 0.889 0.102 (0.035 0.004) Dimensions mm (inches) 6 www.clare.com R01 LBA716 MECHANICAL DIMENSIONS Tape and Reel Packaging for 8-Pin Surface Mount Package 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) Top Cover Tape P = 12.00 (0.472) Ao = 10.30 (0.406) 1 8 W = 16.30 max (0.642 max) K0 = 4.90 (0.193) Embossed Carrier K1 = 4.20 (0.165) Bo = 10.30 (0.406) Dimensions mm (inches) User Direction of Feed Embossment NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-LBA716-R01 (c)Copyright 2008, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 7/23/08 7 |
Price & Availability of LBA716
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |