|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
AME AME385-1.2 n General Description The AME385-1.2 is a micropower 2-terminal band-gap voltage regulator diode. It operates over a 30A to 20mA current range. Each circuit is trimmed at wafer sort to provide a 0.5% initial tolerance. The design of the AME385-1.2 allows for a large range of load capacitances and operating currents. The low start-up current makes these parts ideal for battery applications. AME offers this part in a TO-92 and SOP-8 packages as well as the space saving SOT-23. Shunt Bandgap Voltage Reference n Functional Block Diagram VR Bandgap Cell Feedback Current Shunt n Features l Small Packages: SOT-23, TO-92, SOP-8 l Tolerates Capacitive Loads l Fixed Reverse Breakdown Voltage of 1.235V l Tight Voltage Tolerance ------- 0.5% l Wide Operating Current ------- 30A to 20mA l Wide Temperature Range ----- -40oC to +85oC l Low Temperature Coefficient --100ppm/oC (max) l Excellent Transient Response l All AME's Lead Free Products Meet RoHS Standards. RS VR VS VS GND n Typical Application n Applications l Portable Electronics l Power Supplies l Computer Peripherals l Data Acquisition Systems l Battery chargers l Consumer Electronics VS - VR RS = I 0.1 F Value optional VR = 1.235V Rev.G.03 1 AME AME385-1.2 n Pin Configuration SOP-8 Top View SOT-23 Top View AME 385-1.2 1. NC 2. NC 3. NC 4. 1 2 5. NC 3 AME 385-1.2 1. 2. + - Shunt Bandgap Voltage Reference 8 765 AME385 AME385 3. NC* 1234 6. NC 7. NC 8. + * Die Attach: Conductive Epoxy * Die Attach: Non-Conductive Epoxy TO-92-3 Top View AME 385-1.2 TO-92-2 Top View AME 385-1.2 AME385 1. NC* 2. 3. + - AME385 1. + 2. - * Die Attach: Non-Conductive Epoxy * Die Attach: Non-Conductive Epoxy 1 2 3 1 2 * The NC pin must float or be connected to - (negative) 2 Rev.G.03 AME AME385-1.2 n Ordering Information AME385 x x x x x - x Special Feature2 Special Feature1 Number of Pins Package Type Operating Ambient Temperature Range Accuracy Shunt Bandgap Voltage Reference Accuracy Operating Ambient Temperature Range Package Type Number of Pins A: 8 S: 2 T: 3 Special Feature1 Special Feature2 (For TO-92 Package Only) Package Lead Pitch Taping 5.08mm 2.54mm Bulk A: 0.5% (SOT-23) (SOP-8) (TO-92-2) (TO-92-3) E: -40OC to +85OC A: TO-92 E: SOT-2X H: SOP Z: Lead Free N/A: 1: Rev.G.03 3 AME AME385-1.2 n Ordering Information (contd.) Part Number AME385AEET AME385AEETZ Shunt Bandgap Voltage Reference Marking* ABXww ABXww Accuracy 0.5% 0.5% Package SOT-23 SOT-23 Operating Ambient Temperature Range - 40oC to +85oC - 40oC to +85oC 4 AME 385 AME385AEAS 0.5% TO-92-2 - 40oC to +85oC AEAS yyww AME 385 AME385AEAS-1 0.5% TO-92-2 - 40oC to +85oC AEAS yyww AME 385 AME385AEASZ 0.5% TO-92-2 - 40oC to +85oC AEAS yyww AME 385 AME385AEASZ-1 0.5% TO-92-2 - 40oC to +85oC AEAS yyww AME 385 AME385AEAT 0.5% TO-92-3 - 40oC to +85oC AEAT yyww AME 385 AME385AEAT-1 0.5% TO-92-3 - 40oC to +85oC AEAT yyww AME 385 AME385AEATZ 0.5% TO-92-3 - 40oC to +85oC AEAT yyww AME 385 AME385AEATZ-1 0.5% TO-92-3 - 40oC to +85oC AEAT yyww 385 AME385AEHA AEHA 0.5% SOP-8 - 40oC to +85oC yyww 385 AME385AEHAZ AEHA 0.5% SOP-8 - 40oC to +85oC yyww Note: ww & yyww represents the date code pls see the Date Code Rule on Package Dimension. * A line on top of the first letter represents lead free plating such as ABXww. Please consult AME sales office or authorized Rep./Distributor for the availability of voltage accuracy and package type. Rev.G.03 AME AME385-1.2 n Absolute Maximum Ratings Parameter Supply Current Shunt Bandgap Voltage Reference Maximum 50 Unit mA Caution: Stress above the listed absolute maximum rating may cause permanent damage to the device n Recommended Operating Conditions Parameter Ambient Temperature Range Junction Temperature Range Storage Temperature Range Supply Current Symbol TA TJ TSTG Rating - 40 to +85 - 40 to +125 - 65 to +150 100A ~ 20mA Unit o C C C o o n Electrical Specifications Unless otherwise specified, TA = 0~70OC, IR = 100A Parameter Reference Voltage, 0.5% Reference Voltage Change With Current Reverse Dynamic Impedence Wideband Noise (rms) Long term Stability Reference Voltage Temp. Coeff. Operation Current VREFTC IOP Symbol VREF dV REF/I Test Condition IREF = 100A IMIN < I < 1mA 1mA < I < 20mA IR = 100A, f=20Hz IR = 100A, 10 Hz RDI Vn Rev.G.03 5 AME AME385-1.2 n Thermal Information Parameter Package SOT-23 Thermal Resistance* (Junction to Case) TO-92-2 TO-92-3 SOP-8 SOT-23 Thermal Resistance (Junction to Ambient) TO-92-2 TO-92-3 SOP-8 SOT-23 Internal Power Dissipation TO-92-2 TO-92-3 SOP-8 Maximum Junction Temperature Solder Iron (10 Sec)** Shunt Bandgap Voltage Reference Die Attach Non-Conductive Epoxy Conductive Epoxy Non-Conductive Epoxy Conductive Epoxy Non-Conductive Epoxy Conductive Epoxy Symbol Maximum 140 Unit JC 80 60 280 o C/W JA 150 150 400 o C/W PD 625 810 150 350 mW o C C o * Measure JC on center of molding compound if IC has no tab. ** MIL-STD-202G 210F 6 Rev.G.03 AME AME385-1.2 Shunt Bandgap Voltage Reference n Characterization Curve(For reference only) Normalized Percentage Change vs. Temp. 0.1 0 Reference Voltage Change vs. Current 2 Change of V REF (%) -0.1 -0.2 -0.3 -0.4 -0.5 -0.6 -50 0 50 I=100A Change of VREF (mV) 150 1 0 -1 100 0.01 1 100 Temperature (o C) Operation Current (mA) Reverse Characteristic 100 1 Forward Characteristic 10 85O C IR (uA) IF (mA) 25O C 0.125 1 25O C 85O C 0.1 0 0.65 1.3 0 0.001 0.1 10 VR (V) VF (V) Line Transient Response 25oC 5V/DIV VIN 0.5V/DIV VR 200S/DIV Rev.G.03 7 AME AME385-1.2 n Date Code Rule Marking A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Date Code W W W W W W W W W W W W W W W W W W W W Year xxx0 xxx1 xxx2 xxx3 xxx4 xxx5 xxx6 xxx7 xxx8 xxx9 Shunt Bandgap Voltage Reference n Tape and Reel Dimension SOT-23 P W AME PIN 1 AME Carrier Tape, Number of Components Per Reel and Reel Size Package SOT-23 Carrier Width (W) 8.00.1 mm Pitch (P) 4.00.1 mm Part Per Full Reel 3000pcs Reel Size 1801 mm 8 Rev.G.03 AME AME385-1.2 n Tape and Reel Dimension TO-92-3 Shunt Bandgap Voltage Reference AME AME PIN 1 W P Carrier Tape, Number of Components Per Reel and Reel Size Package TO-92-3 Carrier Width (W) 18.0 +1.0 mm -0.5 Pitch (P) 12.70.2 mm Part Per Full Reel 2000pcs Reel Size N/A TO-92-2 AME AME PIN 1 W P Carrier Tape, Number of Components Per Reel and Reel Size Package TO-92-2 Carrier Width (W) 18.0 +1.0 mm -0.5 Pitch (P) 12.70.2 mm Part Per Full Reel 2000pcs Reel Size N/A Rev.G.03 9 AME AME385-1.2 n Tape and Reel Dimension SOP-8 P Shunt Bandgap Voltage Reference PIN 1 W AME AME Carrier Tape, Number of Components Per Reel and Reel Size Package SOP-8 Carrier Width (W) 12.00.1 mm Pitch (P) 4.00.1 mm Part Per Full Reel 2500pcs Reel Size 3301 mm 10 Rev.G.03 AME AME385-1.2 n Package Dimension SOT-23 Top View D c1 Side View Shunt Bandgap Voltage Reference SYMBOLS A A1 b D E MILLIMETERS MIN 1.00 0.00 0.35 2.70 1.40 INCHES MIN 0.0394 0.0000 0.0138 0.1063 0.0551 MAX 1.40 0.15 0.50 3.10 1.80 MAX 0.0551 0.0059 0.0197 0.1220 0.0709 E PIN 1 e H L e H L 1 A 1.90 BSC 2.40 3.00 0.0748 BSC 0.09449 0.11811 0.0138BSC o Front View 0.35BSC 0 o 10 0 o 10 o SOP-8 Top View C Side View A1 b SYMBOLS A MILLIMETERS MIN 1.35 0.10 INCHES MIN 0.05315 MAX 1.75 0.30 MAX 0.0689 H E A1 A2 B L 0.00394 0.01181 0.05799 REF 0.01299 0.02008 0.00748 0.00984 0.18898 0.20984 0.14961 0.15748 0.05000 BSC 0.01575 0.05000 0.22835 0.24803 0 o 1.473 REF 0.33 0.19 4.80 3.80 0.51 0.25 5.33 4.00 C c PIN 1 D D E e L H Front View 7o(4X) 1.27 BSC 0.40 5.80 0 o 1.27 6.30 0.10 8 o A2 A y 0.00394 8o B Rev.G.03 11 A1 e AME AME385-1.2 n Package Dimension TO-92-3 (bulk pack) SYMBOLS Top View L e e1 w Shunt Bandgap Voltage Reference MILLIMETERS MIN MAX 4.95 INCHES MIN 0.1102 MAX 0.1949 A b E PIN 1 D 2.80 0.40REF 3.94REF 2.54REF 1.27REF 12.70 2.29 0.35 3.80 0.76 4.95 15.49 0.0157REF 0.1551REF 0.1000REF 0.0500REF 0.5000 0.6098 e e1 L E-PIN C 1/16 Side View A R b E R W D 0.0902 0.0138 0.1496 0.0299 0.1949 Notes: 1. Package outline exclusive of any mold flashes dimension. 2. Package outline exclusive of burr dimension. 3. Lead pitch=2.54mm is bulk pack. 4. Lead pitch=5.08mm is tape pack. TO-92-2 (bulk pack) Top View L e e1 SYMBOLS A b E D MILLIMETERS MIN 4.00 INCHES MIN 0.1575 MAX 4.95 MAX 0.1949 0.40REF 3.94REF 2.54REF 1.27REF 12.70 2.29 0.35 3.80 0.76 4.95 15.49 0.0157REF 0.1551REF 0.1000REF 0.0500REF 0.5000 0.6098 w PIN 1 e e1 L R W E-PIN C 1/16 Side View A R b E 0.0902 0.0138 0.1496 0.0299 0.1949 D Notes: 1. Package outline exclusive of any mold flashes dimension. 2. Package outline exclusive of burr dimension. 3. Lead pitch=2.54mm is bulk pack. 4. Lead pitch=5.08mm is tape pack. 12 Rev.G.03 AME AME385-1.2 n Package Dimension TO-92-3 (tape pack) Top View L e e1 Shunt Bandgap Voltage Reference SYMBOLS A b E MILLIMETERS MIN 2.80 INCHES MIN 0.1102 MAX 4.95 MAX 0.1949 0.40REF 2.40 3.94 0.0157REF 0.0945 0.1551 w PIN 1 D e e1 L E-PIN C 1/16 5.08REF 2.54REF 12.70 2.00 0.35 3.80 0.76 4.95 15.49 0.2REF 0.1REF 0.5000 0.6098 R W 0.0787 0.0138 0.1496 0.0299 0.1949 Side View A R b E D Notes: 1. Package outline exclusive of any mold flashes. 2. Package outline exclusive of burr dimension. 3. Lead pitch=2.54mm is bulk pack. 4. Lead pitch=5.08mm is tape pack. TO-92-2 (tape pack) Top View L SYMBOLS A MILLIMETERS MIN 2.80 INCHES MIN 0.1102 MAX 4.95 MAX 0.1949 e e1 w PIN 1 D b E e E-PIN C 1/16 0.40REF 2.40 3.94 0.0157REF 0.0945 0.1551 5.08REF 2.54REF 12.70 2.00 0.35 3.80 0.76 4.95 15.49 0.2REF 0.1REF 0.5000 0.6098 e1 L R Side View A R b E 0.0787 0.0138 0.1496 0.0299 0.1949 W D Notes: 1. Package outline exclusive of any mold flashes. 2. Package outline exclusive of burr dimension. 3. Lead pitch=2.54mm is bulk pack. 4. Lead pitch=5.08mm is tape pack. Rev.G.03 13 www.ame.com.tw E-Mail: sales@ame.com.tw Life Support Policy: These products of AME, Inc. are not authorized for use as critical components in life-support devices or systems, without the express written approval of the president of AME, Inc. AME, Inc. reserves the right to make changes in the circuitry and specifications of its devices and advises its customers to obtain the latest version of relevant information. (c) AME, Inc. , November 2008 Document: 2003/2037-DS385-1.2-G.03 Corporate Headquarter AME, Inc. 2F, 302 Rui-Guang Road, Nei-Hu District Taipei 114, Taiwan. Tel: 886 2 2627-8687 Fax: 886 2 2659-2989 |
Price & Availability of AME385AEAS-1 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |