 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| S/MON/SC841810/A/17/02/2000 page 1 /2 F/GB Relais statique monophase de puissance Power Solid State Relay * Sortie AC synchrone : 12-280VAC-12A * Possibilite de protection IP20 en option : Capot 1K460000 * Adapte a tout type de charges * 12-280VAC -12A Zero-Cross AC Output. * IP20 Protection optional (1K460000). * Designed for all types of loads. Dimensions/Size 27 22,8 0,5 SC841810 17-80VAC/DC control 12A/230VAC output Application typique/Typical application 12-280VAC 28 O4,7 M4 protection reseau line protection 1 19,6 1 58,2 43,2 2 47,6 Entree control 17-80VAC/DC = 4 7,5 3 2 25,8 TOLERANCES: 0,3 25,4 44,5 M3 * 1-2 peuvent etre inversees/ 1 -2 can be changed * le relais doit etre monte sur dissipateur thermique / SSR must be mounted on a heatsink * option : couvercle de protection des bornes : 1K460 000 / cover : 1K460 000 5,1 CHARGE/ LOAD Caracteristiques de commande (a 20C) / Control characteristics (at 20C) AC/DC Parametre / Parameter Symbol Min Nom Max Tension de commande / Control voltage Uc 17 24 80 Courant de commande / Control current (@ Uc ) Ic 5,6 8 26 Tension de relachement/Release voltage Uc off 3 Resistance interne / Input internal resistor fig.1 Rc 3000 Caracteristiques d'entree-sortie (a 20C) / Input-output characteristics (at 20C) Isolement entree-sortie/Input-output isolation @500m Ui 4000 Isolement sortie-semelle/Output-case isolation @500m Ui 2500 Tension assignee isolement/rated impulse voltage Uimp 4000 Caracteristiques generales / General characteristics Parametre / Parameter Poids/Weight Plage de temperature de stockage / Storage temperature range Plage de temperature de fonctionnement/Operating temperature range fig. 1 :Caracteristique d'entree / Control characteristic Unit V mA V 30 25 20 15 10 5 0 0 10 20 30 40 50 60 70 80 VRMS VRMS V Ic (mA) Uc(V) Conditions Symbol Typ. 90 -40 / +100 -40 / +100 Unit g C C Proud to serve you All technical caracteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. celduc r e l a i s S/MON/SC841810/A/17/02/2000 Caracteristiques de sortie(a 20C) / Output characteristics (at 20C) Parametre / Parameter Tension de charge / Load voltage Plage tension de fonctionnement / Operating range Tension crete / Peak voltage Niveau de synchonisation / Synchronizing level Tension d'amorcage / Latching voltage Courant nominal AC-51/ AC-51 nominal current Courant nominal AC-53/ AC-53 nominal current Courant de surcharge non repetitif /Non repetitive overload current Chute tension directe crete/ On state voltage drop Courant de fuite etat bloque/ Off state leakage current Courant de charge minimum / Minimum load current Temps de fermeture/ Turn on time Temps d'ouverture/ Turn off time Plage de frequence / Operating frequency range dv/dt etat bloque / Off state dv/dt dI/dt maximum non repetitif/ Maximum di/dt non repetitive I2t (<10ms) EMC Test d'immunite conduite / Conducted immunity level EMC Test d'immunite conduite / Conducted immunity level Conformite / Conformity page 2 / 2 F/GB Conditions Symbol Typ. Unit Ue 230 V rms Uemin-max 12-280 V rms Up 600 V Usync 12 V Ua 8 V Ie AC-51 12 A rms Ie AC-53 2,5 A rms Itsm 120 A Vd 1,3 V Ilk <3 mA Ie min 5 mA ton max 30 ms toff max 30 ms f 0,1-440 Hz dv/dt 500 V/s di/dt 50 A/s I2t 72 A2s 2kV criterion A 2kV crit.A with external VDR Ie nom ( see Fig. 2 ) ( see Fig. 2 ) tp=10ms (Fig. 3) @ Ie nom @Ue, 50Hz Uc nom DC ,f=50Hz Uc nom DC ,f=50Hz IEC 1000-4-4 (burst) IEC 1000-4-5(schocks) EN60947-4-x Fig. 2 Courbes thermiques / Thermal characteristics Pd ( watts) 20 18 4K/W 16 Full on state 14 12 10 8 6 4 2 0 0 1 2 3 4 5 6 7 8 9 10 11 12 RMS load current : I (A) 0 10 20 30 40 50 60 70 80 90 100 110 120 50% on state 6K/W 1,6K/W 2,2K/W 1,1K/W T case max (C) 75 80 85 90 95 100 Ambient temperature : Tamb (C) Fig.3 Surcharge de courant : Itsm (Apeak) = f(t) pour modele 10A(Itsm=120A) / Surge current : Itsm (Apeak) = f(t) for 10A models with Itsm =120A 150 Itsm (Apeak) 1 -Itsm non repetitif sans tension reappliquee est donne pour la determination des protections. No repetitive Itsm is given without voltage reapplied for the determination of the protection. 2 -Itsm repetitif est donne pour des surcharges de courant (Tj initiale=70C). La repetition de ces surcharges de courant diminue la duree de vie du Relais. Repetitive Itsm is given for inrush current with initial Tj = 70C. The repetition of the surge current decrease the lifetime SSR's . 100 Surcharge de courant non repetitive sans tension reappliquee / No repetive surge current without voltage reapplied 50 Surcharge de courant repetitive avec tension reappliquee Repetive surge current with voltage reapplied. 0 0,01 0,1 t(s) 1 10 Precautions : * Les relais a semiconducteurs ne procurent pas d'isolation galvanique entre le reseau et la charge. Cautions : * Semiconductor relays don't provide any galvanic insulation between the load and the mains. celduc r e l a i s www.celduc.com Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19 |
Price & Availability of SC841810
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |