View ML2010-R005-FB_4407789.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

LOW-OHM CHIP RESISTORS, 0.1W TO 3W
RESISTORS CAPACITORS COILS DELAY LINES
ML SERIES
RoHS
Term.W is RoHS compliant & 260C compatible
t T L W
Industry's widest range and lowest cost! Values as low as 0.0005, current ratings to 60 Amp High power to size ratio Non-inductive OPTIONS Option V: 170C operating temperature range Option EK: Group A screening per MIL-R-10509 Option EL: Group A & B screening per MIL-R-10509
RCD Type ML0402 Max. Max. Wattage * Current * (70C) (70C) 0.1W 3A Resistance R an g e 0.02 TO 0.049 0.050 TO 0.099 0.100 TO1.0 0.01 TO 0.049 0.050 TO 0.099 0.100 TO1.0 0.01 TO 0.049 0.050 TO 0.099 0.100 TO1.0 0.01 TO 0.049 0.050 TO 0.099 0.100 TO1.0 0.01 TO 0.049 0.050 TO 0.099 0.100 TO1.0 0.01 TO 0.049 0.050 TO 0.099 0.100 TO1.0 0.0005 0.00075, 0.001, 0.0015, 0.002 0.0025 TO 0.01
RCD's ML series offers cost-effective solutions for low resistance applications and are particularly ideal for various types of current sensing, voltage dividing, battery and pulse circuits, including linear and switching power supplies, power amplifiers, consumer electronics, etc. The resistance element is thick film or metal plate, and is coated with high temperature insulation for exceptional environmental protection.
Optional TC (ppm/C) 200, 100 200, 100 100 200, 100 200, 100 100 200, 100 200, 100 100 200, 100 200, 100 100 200, 100 200, 100 100 200, 100 200, 100 100 200, 100 100, 50 100, 50 L W T t
Typical TC (ppm/C) 400 300 200 400 300 200 400 300 200 400 300 200 400 300 200 400 300 200 350 200 150
.040 .004 .020 .004 .014 .004 .010 .004 [1.00 .1] [.5 .1] [.35 .1] [.25 .1] .061 .005 .031 .004 .016 . 006 .012 .008 [1.55 .12] [.8 .1] [.40 .15] [.3 .2] .079 .008 .050 .008 .020 .006 .024 .008 [2.0 0.2] [1.25 0.2] [0.5 .15] [0.6 0.2] .126 .008 .063 .008 .020 .006 .030 .018 [3.2 0.2] [1.6 0.2] [0.5 .15] [0.76 .46] .197 .008 .098 .008 .020 .006 .032 .020 [5.0 0.2] [2.5 0.2] [0.5 .15] [0.8 0.5] .250 0.01 .126 .012 .024 .008 .040 .020 [6.35 0.25] [3.2 0.3] [0.6 .2] [1 0.5] .250 0.01 .126 .012 .020~.063** .040~.106** [6.35 0.25] [3.2 0.3] [0.5 ~ 1.6] [1.0 ~ 2.7]
ML0603
0.125W
3.5A
ML0805
0.25W
5A
ML1206
0.5W
7A
ML2010
1W
14A
ML2512
2W
20A
MLB2512 2W/ 3W *
60A
* In order to operate at maximum wattage and current ratings, a suitable substrate or PCB design is required to carry the current and drain the heat. Heavy Cu, large pads and traces, and/or multilayer PC boards are recommended. MLB2512 has a 3W rating when used with 300mm2 x .0056 Cu pads ** Varies with resistance value (lower values typically have thicker bodies and wider termination pads for increased current carrying capability)
TYPICAL PERFORMANCE CHARACTERISTICS
Characteristics
Thermal Shock (-55 to +155C) Short Time Overload (2x [PxR]1/2, 5 sec.) Low Temp. Operation (-55C) High Temp. Exposure (125C, 100 hrs.) Resistance to Solder Heat Moisture Resistance Load Life(1000 hrs.) Operating Temperature Range Derating of Wattage & Current Solderability Terminal Adhesion
P/N DESIGNATION:
RCD Type
ML2010
- R01 - J T
W
R
1% 2% 1% 1% 0.5% 1% 2% -55 to +155C 1.177%/C above 70C 95% Min. Coverage 15 Grams Min.
Options: V, EK, EL (leave blank if standard) Resis. Code: for 1% tol. use R as decimal point and 3 digits, e.g. R100= 0.1, R200=.2; for 2%-10% use R and 2 digits , e.g. R10= 0.1, R20= .2, etc. except if necessary, use additional (significant) digits, e.g. R005 for 0.005, R0075 for 0.0075 in any tolerance Tolerance Code: F=1%, G=2%, J=5% Packaging: B=Bulk, T=Tape & Reel Optional TC: 50=50ppm, 101=100ppm, 201-200ppm Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable)
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:sales@rcdcomponents.com
FA009C Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
24

▲Up To Search▲

Price & Availability of ML2010-R005-FB

	To Download ML2010-R005-FB Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .