View RPT-65-SPEC_4387198.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

65W Triple Output Switching Power Supply
Features :
Universal AC input/Full range
R P T- 6 5
series
12V or 24V high peak output current capability
Optional L-Bracket and cover
Low leakage current<1mA Protections: Short circuit / Overload / Over voltage 65W free air convection, 80W with 18CFM forced air 100% full load burn-in test Fixed switching frequency at 65KHz 2 years warranty
SPECIFICATION
MODEL OUTPUT NUMBER DC VOLTAGE RATED CURRENT CURRENT RANGE PEAK LOAD RATED POWER OUTPUT OUTPUT POWER (max.) VOLTAGE ADJ. RANGE LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & EMC
(Note 4)
RPT-65E CH1 12V 4.5A 0.18 ~ 5.8A
Note.4 7.5A
RPT-65F CH2 5V 1.2A 0 ~ 1.5A Rated load CH3 -5V 0.5A 0 ~ 0.7A Rated load CH1 12V 4.5A 0.18 ~ 5.8A 7.5A 66W 100mVp-p 120mVp-p 5.0% 1.0% 5.0% 150mVp-p 100mVp-p 150mVp-p 5.0% 1.0% 5.0% CH2 5V 1.2A 0 ~ 1.5A Rated load CH3 -12V 0.5A 0 ~ 0.7A Rated load
RPT-65G CH1 24V 2.25A 0.09 ~ 2.9A 3.75A 66W 150mVp-p 50mVp-p 100mVp-p 5.0% 1.0% 5.0% CH2 5V 1.2A 0 ~ 1.5A Rated load CH3 12V 0.5A 0 ~ 0.7A Rated load
62.5W
Rated output power for convection; 80W with 18CFM min. forced air CH1:11.4 ~ 12.8V 2.0% 5.0% 1.0% 2.0% 1.0% 5.0% CH1:22.8 ~ 26.4V 2.0% 5.0% 1.0% 2.0% 1.0% 5.0%
RIPPLE & NOISE (max.) Note.2 120mVp-p
CH1:11.4 ~ 12.8V VOLTAGE TOLERANCE Note.3 2.0% 5.0% 1.0% 2.0% 1.0% 5.0%
800ms, 20ms at full load 20ms at full load 90 ~ 264VAC 47 ~ 440Hz 77% 1.5A/115VAC 0.9A/230VAC 50A/230VAC COLD START 25A/115VAC <1mA 77% 81% 127 ~370VDC
90 ~ 125W output power Protection type : Hiccup mode, recovers automatically after fault condition is removed. CH1:13.8 ~ 16.2V CH1:27.6 ~ 32.4V CH1:13.8 ~ 16.2V Protection type : Hiccup mode, recovers automatically after fault condition is removed. -20 ~ +60 -40 ~ +85 (Refer to output load derating curve) , 10 ~ 95% RH 20 ~ 90% RH non-condensing 0.04%/ (0 ~ 50 ) on CH1 output 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A MTBF DIMENSION PACKING 288.1K hrs min. MIL-HDBK-217F (25 ) PCB:127*76*28mm (L*W*H) with optional CASE:130*84.4*37mm (L*W*H) 0.24Kg; 63pcs/16Kg/1.35CUFT
OTHERS
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. 10% duty cycle maximum within every second. Average output power should not exceed the rated power, output voltage above 90% DC voltage. 5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
File Name:RPT-65-SPEC 2008-03-25
65W Triple Output Switching Power Supply
Mechanical Specification
R P T- 6 5
Case No. 946A
series
Unit:mm
Optional cover: No. 946A-T 127 115.8 5.6
5.6
CN2 6 5 4 3 2 1
64.8
76
FS1
1 2 3 CN1
SVR1
18
7.1
4-
15cm FAM
3.8
18CFM min. (60W convection, 77W with FAN)
2-M
84 .4
3
11 5
4-M .8
3L
=4
29mm(max)
=4
37
8.2
41 .7 26
17
6-M
3L
78
3 max.
13
0
62
68
.6
Optional L-Bracket: No. 946A-D
AC Input Connector (CN1) : Molex 5273-03 or equivalent
Pin No. 1 2 3 Assignment AC/L No Pin AC/N Mating Housing Molex 5195 or equivalent Terminal Molex 5194 or equivalent
DC Output Connector (CN2) : Molex 5273-06 or equivalent
Pin No. 1,2 3,4 5 6 Assignment V1 GND V2 V3 Mating Housing Molex 5195 or equivalent Terminal Molex 5194 or equivalent
Block Diagram
fosc : 65KHz
RECTIFIERS & FILTER RECTIFIERS & FILTER RECTIFIERS & FILTER DETECTION CIRCUIT O.V.P.
V3
I/P
EMI FILTER
RECTIFIERS & FILTER
POWER SWITCHING
V2
FG
+5V COM
O.L.P.
PWM CONTROL
File Name:RPT-65-SPEC 2008-03-25
65W Triple Output Switching Power Supply
Derating Curve
R P T- 6 5
series
Output Derating VS Input Voltage
100
100
PCB only
80
For PCB with L-Bracket+cover option
90 80 70
For both PCB only and with L-Bracket+cover option
60
LOAD (%)
40
LOAD(%)
-10 0 10 20 30 40 50 60 (HORIZONTAL)
60 50 40
20
-20
90
100
110
135
155
230 264
AMBIENT TEMPERATURE ( )
INPUT VOLTAGE (V) 60Hz
File Name:RPT-65-SPEC 2008-03-25

▲Up To Search▲

Price & Availability of RPT-65-SPEC

	To Download RPT-65-SPEC Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .