 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 2.5X2.0mm SURFACE MOUNT LED LAMP PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AT2520QW10ZS White Features Dimension: 2.5mmx 2.0mm x 0.8mm. Low thermal resistance. Ceramic package with silicone resin. Higher brightness LED flash. Small package with high efficiency. Surface mount technology. ESD protection. Radiation patterns optimal for camera flash. Enables higher resolution pictures in darken environments. Package : 2000pcs / reel. Moisture sensitivity level : level 2a. Soldering methods: IR reflow soldering. RoHS compliant. Application Note Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically Typical Applications Digital still cameras Camera-phones PDAs Room lighting Architectural lighting Decorative/pathway lighting Front panel backlight Exterior automotive lighting: Package Dimensions (brake lights, turn lights, backlighting) Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAI2180 APPROVED: WYNEC REV NO: V.7 CHECKED: Allen Liu DATE: JAN/13/2009 DRAWN: Y.F.Lu PAGE: 1 OF 8 ERP: 1212000119 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might leads to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry. 4. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diameter of the nozzle should be as large as possible. 5. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup. 6. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production. SPEC NO: DSAI2180 APPROVED: WYNEC REV NO: V.7 CHECKED: Allen Liu DATE: JAN/13/2009 DRAWN: Y.F.Lu PAGE: 2 OF 8 ERP: 1212000119 Selection Guide Part No. Dice luminous Intensity [2] Iv(mcd)@ 250mA Min. AT2520QW10ZS WHITE (InGaAlN) 8000 Typ. 12000 v (lm) [2] @ 250mA Min. 30 Typ. 38 Viewing Angle [1] 2 1/2 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity / luminous flux: +/-15%. Absolute Maximum Ratings at TA=25C Parameter Power dissipation Junction temperature[1] Operating Temperature Storage Temperature DC Forward Current [1] Peak Forward Current [2] Thermal resistance [1] Electrostatic Discharge Threshold (HBM) Symbol Pt TJ Top Tstg IF IFM Rth j-a Value 1.00 110 -40 To +100 -40 To +120 250 400 110 8000 Unit W C C C mA mA C/W V Notes: 1. Results from mounting on PC board FR4,mounted on pc board-metal core PCB is recommend. for lowest thermal resistance. 2. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAI2180 APPROVED: WYNEC REV NO: V.7 CHECKED: Allen Liu DATE: JAN/13/2009 DRAWN: Y.F.Lu PAGE: 3 OF 8 ERP: 1212000119 Electrical / Optical Characteristics at TA=25C Parameter Chromaticity coordinate x acc.to CIE1931 IF=250mA [Typ.] Chromaticity coordinate y acc.to CIE1931 IF=250mA [Typ.] Forward Voltage IF=250mA [Min.] Forward Voltage IF=250mA [Typ.] Forward Voltage IF=250mA [Max.] Temperature coefficient of x IF=250mA, -10 C T100 C [Typ.] Temperature coefficient of y IF=250mA, -10 C T100 C [Typ.] Temperature coefficient of VF IF=250mA, -10 C T100 C [Typ.] Notes: 1.Measurement tolerance of the chromaticity coordinates is 0.01. 2.Forward Voltage: +/-0.1V. Symbol Value Unit X [1] 0.31 - Y [1] 0.31 - 3.0 VF [2] 3.5 4.0 TC x 0.15 10-3/ C 10-3/ C V TCy 0.13 TCV -3.2 mV/ C Summary of Practical Pulsing Configurations with Typical Thermal Management. Flash Pulse Current Flash Pulse Duration 50 ms 100 ms 200 ms 300 ms OK - 0.35A OK OK OK OK 0.6A OK OK OK - 1A OK OK - 2A OK - Signifies a transient temperature change of less than 40C. Temperature change > 40C, may require additional thermal management. SPEC NO: DSAI2180 APPROVED: WYNEC REV NO: V.7 CHECKED: Allen Liu DATE: JAN/13/2009 DRAWN: Y.F.Lu PAGE: 4 OF 8 ERP: 1212000119 AT2520QW10ZS SPEC NO: DSAI2180 APPROVED: WYNEC REV NO: V.7 CHECKED: Allen Liu DATE: JAN/13/2009 DRAWN: Y.F.Lu PAGE: 5 OF 8 ERP: 1212000119 AT2520QW10ZS White CIE 0.40 c0 0.35 b1 y 0.30 b2 a0 0.25 a2 0.20 0.20 0.25 0.30 0.35 0.40 x Rank a2 x y 0.263 0.213 0.282 0.245 0.265 0.265 0.242 0.226 x y 0.282 0.245 Rank a0 0.298 0.271 0.286 0.299 0.265 0.265 Rank b2 x y 0.298 0.271 0.313 0.296 0.306 0.332 0.286 0.299 x y 0.313 0.296 Rank b1 0.329 0.325 0.329 0.371 0.306 0.332 Rank c0 x y 0.329 0.325 0.358 0.372 0.363 0.400 0.329 0.371 SPEC NO: DSAI2180 APPROVED: WYNEC REV NO: V.7 CHECKED: Allen Liu DATE: JAN/13/2009 DRAWN: Y.F.Lu PAGE: 6 OF 8 ERP: 1212000119 AT2520QW10ZS Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Specifications (Units : mm) SPEC NO: DSAI2180 APPROVED: WYNEC REV NO: V.7 CHECKED: Allen Liu DATE: JAN/13/2009 DRAWN: Y.F.Lu PAGE: 7 OF 8 ERP: 1212000119 PACKING & LABEL SPECIFICATIONS AT2520QW10ZS SPEC NO: DSAI2180 APPROVED: WYNEC REV NO: V.7 CHECKED: Allen Liu DATE: JAN/13/2009 DRAWN: Y.F.Lu PAGE: 8 OF 8 ERP: 1212000119 |
Price & Availability of AT2520QW10ZS
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |