|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Mini Top View LEDs 65-21/Y2SC-AR1S2B/2T Features White SMT package. Optical indicator. Wide viewing angle. Soldering methods: reflow soldering Available on tape and reel Pb-free The product itself will remain within RoHS compliant version. Descriptions The 65-21 series is available in soft orange, green, blue, and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the ideal for light pipe application. Applications Optical indicators. Coupling into light guides. Backlighting (LCD, cellular phones, switches, keys, displays, illuminated advertising, general lighting). Coupling into light guides; Interior automotive lighting (e.g. dashboard backlighting, etc.). Device Selection Guide Chip Emitted Color Material AlGaInP Brilliant Yellow Water Clear Resin Color Everlight Electronics Co., Ltd. Device No. : DSE-651-067 http://www.everlight.com prepared date:12-Apr-2007 Rev. 1 Page: 1 of 10 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 65-21/Y2SC-AR1S2B/2T Package Outline Dimensions Recommended soldingpaddesign Notes: The tolerances unless mentioned is O 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-651-067 http://www.everlight.com prepared date:12-Apr-2007 Rev. 1 Page: 2 of 10 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 65-21/Y2SC-AR1S2B/2T Absolute Maximum Ratings (Ta=25J Parameter Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge (HBM) Operating Temperature Storage Temperature Soldering Temperature VR IF IFP Pd ESD Topr Tstg Tsol ) Rating 5 50 100 120 2000 -40 ~ +85 -40 ~ +90 Reflow Soldering : 260 J Hand Soldering : 350 J J J for 10 sec. for 3 sec. Unit V mA mA mW V Symbol Electro-Optical Characteristics (Ta=25J Parameter Luminous Intensity Viewing Angle ) Typ. ----120 591 ----15 --------Max. 285 --------594.5 ----2.35 10 Unit mcd deg nm nm nm V g A Condition IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA VR=5V Symbol Iv 2c 1/2 p d VF IR Min. 112 --------585.5 ----1.75 ----- Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current Notes: 1.Tolerance of Luminous Intensity O 11% 2.Tolerance of Dominant Wavelength O 1nm 3.Tolerance of Forward Voltage O 0.1V Everlight Electronics Co., Ltd. Device No. : DSE-651-067 http://www.everlight.com prepared date:12-Apr-2007 Rev. 1 Page: 3 of 10 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 65-21/Y2SC-AR1S2B/2T Bin Range Of Dominant Wavelength Group A Bin Code D3 D4 D5 Min. 585.5 588.5 591.5 Max. 588.5 591.5 594.5 Max 140 180 225 285 Max 1.95 2.15 2.35 Unit Condition nm IF=20mA Unit Condition Bin Range Of Luminous Intensity Bin Min 112 R1 140 R2 180 S1 225 S2 Bin Range Of Forward Voltage Groups Bin Min 0 1.75 B 1 1.95 2 2.15 Notes: 1.Tolerance of Luminous Intensity O 11% 2.Tolerance of Dominant Wavelength O 1nm 3.Tolerance of Forward Voltage O 0.1V mcd IF=20mA Unit V Condition IF=20mA Everlight Electronics Co., Ltd. Device No. : DSE-651-067 http://www.everlight.com prepared date:12-Apr-2007 Rev. 1 Page: 4 of 10 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 65-21/Y2SC-AR1S2B/2T Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No. : DSE-651-067 http://www.everlight.com prepared date:12-Apr-2007 Rev. 1 Page: 5 of 10 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 65-21/Y2SC-AR1S2B/2T Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is O 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-651-067 http://www.everlight.com prepared date:12-Apr-2007 Rev. 1 Page: 6 of 10 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 65-21/Y2SC-AR1S2B/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. Note: The tolerances unless mentioned is O 0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No. : DSE-651-067 http://www.everlight.com prepared date:12-Apr-2007 Rev. 1 Page: 7 of 10 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 65-21/Y2SC-AR1S2B/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence levelG 90% LTPDG 10% No. 1 2 Items Reflow Soldering Temperature Cycle Test Condition Temp. : 260JO 5J Min. 5sec. H : +100J 15min i 5 min L : -40J 15min H : +100J 5min i 10 sec L : -10J 5min Temp. : 100J Temp. : -40J IF = 20 mA 85J / 85%RH Test Sample Ac/Re Hours/Cycles Size 6 Min. 22 PCS. 0/1 0/1 300 Cycles 22 PCS. 3 4 5 6 7 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 22 PCS. 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 0/1 Everlight Electronics Co., Ltd. Device No. : DSE-651-067 http://www.everlight.com prepared date:12-Apr-2007 Rev. 1 Page: 8 of 10 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 65-21/Y2SC-AR1S2B/2T Precautions For Use 1.Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30J or less and 90%RH or less. or less and 60% RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30J If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60O 5J 3. Soldering Condition 3.1 Pb-free solder temperature profile for 24 hours. 1~5 C / Sec. 260C. Max. 10 Sec. Max. 1~5 C / Sec. Pre-heating 180~200C 60 Sec. Max. Above 220C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350J for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No. : DSE-651-067 http://www.everlight.com prepared date:12-Apr-2007 Rev. 1 Page: 9 of 10 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 65-21/Y2SC-AR1S2B/2T 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No. : DSE-651-067 http://www.everlight.com prepared date:12-Apr-2007 Rev. 1 Page: 10 of 10 Prepared by:Teresa Lee |
Price & Availability of 65-21-Y2SC-AR1S2B-2T |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |