View SMT15C_4302357.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Embedded Power for Business-Critical Continuity
SMT15C Series
5 Vin and 12 Vin single output
Rev.06.25.07 SMT15C 1 of 4
Total Power: 50W Input Voltage: 4.5-5.5 Vdc # of Outputs: Single
Special Features
* 15 A current rating * Input voltage range: 4.5 Vdc - 5.5 Vdc or 10.2 Vdc - 13.8 Vdc * Output voltage range: 0.9 Vdc - 3.3/5.0 Vdc * Industry leading value * Cost optimized design * Excellent transient response * Output voltage adjustability * Pathway for future upgrades * Supports silicon voltage migration * Resulting in reduced design-in and qualification time * Designed in reliability: MTBF of >7 million hours per Telcordia SR-332 * Available RoHS compliant * 2 year warranty
The SMT15C series is a new high density open-frame, non-isolated converter for space sensitive applications. Each model has a wide input range (4.5 Vdc to 5.5 Vdc or 10.2 Vdc to 13.8Vdc) and offers a wide 0.9 Vdc to 5.0 Vdc output voltage range with a 15 A load. An external resistor adjusts the output voltage from its pre-set value of 0.9 V to any value up to the 5 V maximum. Typical efficiencies for the models are 89% for the 5 V input version and 91% for the 12 V input version. The series offers remote ON/OFF and overcurrent protection as standard. With full international safety approvals including EN60950 and UL/cUL60950, the SMT15C reduces compliance costs and time to market.
Safety
UL/cUL CAN/CSA 22.2 No. 60950 UL 60950 File No. E139421 TUV Product Service (EN60950:2000) Certificate No. B 04 08 19870 228 CB report and certificate to US/6415C/UL
Embedded Power for Business-Critical Continuity
Specifications
All specifications are typical at nominal input, full load at 25C unless otherwise stated.
Rev.06.25.07 SMT15C 2 of 4
OUTPUT SPECIFICATIONS Voltage adjustability (See Note 7) 5 Vin 12 Vin 0.9-3.3 Vdc 0.9-5.0 Vdc 2.5% 0.2% 0.5% 0 A/15 A 5 Vin 12 Vin At turn-off (See Note 6) 3.0% max. 1.0% max. 100 mV max. See Table on page 2 100 mV max. deviation 200 s recovery to within regulation band
INPUT SPECIFICATIONS (CONTD.) Turn ON threshold Turn OFF threshold 5 Vin 12 Vin 5 Vin 12 Vin 4.5 Vdc typ. 9.3 Vdc typ. 4.3 Vdc typ. 7.8 Vdc typ.
Output setpoint accuracy 1.0% trim resistors Line regulation Load regulation Min/max load Overshoot (at turn-on) Undershoot Ripple and noise 5 Hz to 20 MHz Transient response (See Note 1) Low line to high line Full load to min. load
GENERAL SPECIFICATIONS Efficiency Switching frequency Approvals and standards Material flammability Weight Coplanarity MTBF Telcordia SR-332 Fixed (See Note 4) See Table on page 2 200 kHz TUV Product Services IEC60950, UL/cUL60950 UL94V-0 14.2 g (0.5 oz) 150 m 7,817,294 hours
INPUT SPECIFICATIONS Input voltage range Input current Input current (max.) (See Note 9) Input reflected ripple (See Note 2) Remote ON/OFF Logic compatibility ON OFF Start-up time (See Note 3) Power-up Remote ON/OFF 5 Vin 12 Vin Minimum load Remote ON/OFF 5 Vin 12 Vin 5 Vin 12 Vin 4.5-5.5 Vdc 10.2-13.8 Vdc 65 mA 20 mA 11.5 A max. @ Io max. 8.1 A @ lo max. 200 mA (pk-pk) 200 mA (pk-pk) Positive logic >2.4 Vdc <0.8 Vdc <20 ms <20 ms
ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 10) Operating ambient, temperature Non-operating 0 C to +80 C -40 C to +125 C
PROTECTION Short-circuit RECOMMENDED SYSTEM CAPACITANCE Input capacitance Output capacitance (See Note 11) (See Note 11) 270 F/20 mW ESR max. 680 F/10 mW ESR max. Hiccup, non-latching
Embedded Power for Business-Critical Continuity
Specifications
All specifications are typical at nominal input Vin = 12 V, full load at 25C unless otherwise stated.
Rev.06.25.07 SMT15C 3 of 4
OUTPUT POWER (MAX.) 50 W 75 W
INPUT VOLTAGE 4.5-5.5 Vdc 10.2-13.8 Vdc
OUTPUT VOLTAGE 0.9-3.3 Vdc 0.9-5.0 Vdc
OUTPUT CURRENT (MIN.) 0A 0A
OUTPUT CURRENT (MAX.) 15 A 15 A
EFFICIENCY (TYP.) 89% 91%
REGULATION LINE 0.2% 0.2% LOAD 0.5% 0.5%
MODEL NUMBER (12,13) SMT15C-05SADJJ SMT15C-12SADJJ
Part Number System with Options
SMT15C-12SADJJ
Packaging Options (12) J = Pb-free (RoHS 6/6 compliant)
Product Family SMT = Surface Mount Rated Output Current 15 = 15 A Performance C = Cost Optimized
Number of Outputs SADJ = Single Adjustable Output
Input Voltage 05 = 4.5 Vdc to 5.5 Vdc 12 = 10.2 Vdc to 13.8 Vdc
Output Voltage Adjustment of the SMT15C Series
The ultra-wide output voltage trim range offers major advantages to users who select the SMT15C series. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.9 Vdc to 5.0 Vdc. When the SMT15C series converter leaves the factory the output has been adjusted to the default voltage of 0.9 V.
Notes
1 2 3 4 5 6 7 8 9 10 11 12 13 di/dt = 10 A/s, Vin = Nom, Tc = 25 C, load change = 0.50 lo max. to 0.75 lo max, and vice versa. Measured with external filter. See Application Note 169 for details. Power up is the time from application of dc input to POWER GOOD high. Remote ON/OFF asserted high to POWER GOOD high. This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. Reserved. Measured as per recommended set-up. Cin = 270 F (20mW ESR max.), Cout = 680 F (10 mW ESR max.). Uses external resistor from TRIM to ground. See Application Note 169 for details. Minimum value 485 F for 5 V model, 280 F for 12 V model. Signal line assumed <3 m in length. External input fusing recommended. See Application Note 169 for operation above 50 C. See Application Note 169 for more details. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative.
Ripple and Noise Specification Model 5 V input models 12 V input models Output Voltage 0.9 Vdc to 2.5 Vdc 3.3 Vdc 0.9 Vdc to 2.5 Vdc 3.3 Vdc to 5 Vdc Pk - Pk 30 mV 40 mV 50 mV 50 mV RMS 15 mV 15 mV 25 mV 25 mV
Embedded Power for Business-Critical Continuity
Rev.06.25.07 SMT15C 4 of 4
Americas
0.234 (5.95)
1.20 (30.5)
0.901 (22.88)
0.054 (1.38)
PIN 7
PIN 8
5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698
Europe (UK)
Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355
PIN 1
0.150 (3.81)
1.10 (27.9)
0.956 (24.27)
0.054 (1.38)
4X 0.145 (3.68) PIN 6
0.940 (23.88)
Asia (HK)
16th - 17th Floors, Lu Plaza 2 Wing Yip Street, Kwun Tong Kowloon, Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888
0.457 (11.61) Installed Ht.
0.062 (1.57) REF
0.29 (7.4 max)
For global contact, visit:
Seating Plane 8 X 0.105 (2.67)
www.powerconversion.com technicalsupport@powerconversion.com
While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions.
0.011 (0.27) TYP
All dimensions in inches (mm) All tolerance 0.010in (0.25mm) unless otherwise stated
PIN CONNECTIONS PIN NUMBER 1 2 3 4 5 6 7 8 FUNCTION Vout Vout Power Good GND GND Vin Trim Remote ON/OFF
Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Power Inbound Power Integrated Cabinet Solutions Outside Plant Precision Cooling Site Monitoring and Services EmersonNetworkPower. com
Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. (c)2007 Emerson Electric Co.

▲Up To Search▲

Price & Availability of SMT15C

	To Download SMT15C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .