View P11_4298686.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

P11
Vishay Sfernice
12.5 mm Modular Panel Potentiometers Cermet (P11S) or Conductive Plastic Elements (P11A)
FEATURES
* * * * * * * * * * * * * *
VERSATILE MODULAR
12.5 mm square single turn panel control Five shaft diameters and 29 terminal styles RoHS Multiple assemblies - up to seven modules COMPLIANT Tests according to CECC 41 000 GAM T1 P11S version for industrial, military and aeronautics applications P11A version for professional audio applications Low current compatibility Shaft and panel sealed version Up to twenty-one indent positions Rotary and push/push switch options Concentric shafts Custom designs Trimmer version T11 (see document no. 51021)
COMPACT ROBUST
CONFIGURATION EXAMPLE
Single module, single shaft, solder lugs, metric bushing and shaft
12.5 (0.492) 13.1 (0.516) 5 (0.197) 6.85 (0.270)
M6 x 0.75
2.4 (0.094) 12.5 (0.492)
3 O (0.118)
8 (0.315) 22 (0.866)
1.8 (0.071) 5.07 (0.200) 0,9 (0.035)
4.65 (0.183)
B
4.65 (0.183)
4.9 (0.193)
DETAIL B
Single module, single shaft, vertical mounting, PC pins with support plate, metric bushing and shaft
M10 x 0.75
12.7 (0.500) 6 O (0.236) 9.5 (0.374) 16 (0.626) 8 (0.315) 2.54 (0.100) 2.54 (0.100)
Dual modules, single shaft, PC pins with front support plates, imperial bushing and shaft
9.5 (0.374) 12.5 (0.492)
3/8" x 3/8"
13.1 (0.516) 6.35 O (0.250) 3.6 (0.143) 19.05 (0.750) 8 (0.325) 7.62 (0.300) 2.54 (0.100) 2.54 (0.100)
www.vishay.com 1
For technical questions, contact: sfer@vishay.com
Document Number: 51031 Revision: 16-Jun-08
P11
12.5 mm Modular Panel Potentiometers Vishay Sfernice Cermet (P11S) or Conductive Plastic Elements (P11A)
GENERAL SPECIFICATIONS ELECTRICAL (INITIAL)
Resistive Element Electrical Travel Resistance Range (1) Tolerance linear law non linear law standard on request linear law non linear law multiple assemblies P11A Conductive plastic 270 10 1 k to 1 M 470 to 500 k 20 % 0.5 W at + 70 C 0.25 W at + 70 C 0.25 W at + 70 C per module 500 ppm 350 V 2 1% 5% 106 M min. 1500 VRMS min. 90 dB max./0.05 dB min. 50 000 cycles P11S Cermet 270 10 20 to 10 M 100 to 2.2 M 20 % 5 % or 10 % 1 W at + 70 C 0.5 W at + 70 C 0.5 W at + 70 C per module 150 ppm 350 V 2 2 % or 3 5% 106 M min. 1500 VRMS min. 50 000 cycles
Power Rating at 70 C Temperature Coefficient (Typical) Limiting Element Voltage End Resistance (Typical) Contact Resistance Variation Independent Linearity (Typical) Insulation Resistance Dielectric Strength Attenuation Mechanical Rotation Life
linear law linear law
Note: (1) Consult Vishay Sfernice for other ohmic values
MECHANICAL (INITIAL)
Mechanical Travel Operating Torque (Typical): Single and Dual Assemblies: 3 mm, 4 mm (1/8") Dia. Shafts 6 mm (1/4") Dia. Shafts Three to Seven Modules (Per Module): End Stop Torque (All Bushing Except G) 3 mm, 4 mm (1/8") Dia. Shafts 6 mm (1/4") Dia. Shafts End Stop Torque for Bushing G All Shafts Dia. Tightening Torque 6 mm, 7 mm (1/4") Dia. Bushings 10 mm (3/8") Dia. Bushings Weight 300 5
0.5 to 1.3 Ncm max. (0.7 to 1.8 oz.-inch max.) 0.7 to 1.5 Ncm max. (1.0 to 2.1 oz.-inch max.) 0.2 to 0.3 Ncm max. (0.3 to 0.45 oz.-inch max.) 25 Ncm max. (2.1 lb-inch max.) 80 Ncm max. (6.8 lb-inch max.) 40 Ncm max. (3.4 lb-inch max.) 150 Ncm max. (13 lb-inch max.) 250 Ncm max. (21 lb-inch max.) 7 g to 9 g per module (0.25 to 0.32 oz.)
ENVIRONMENTAL
Operating Temperature Range Climatic Category Sealing Storage Temperature P11A - 55 C to + 125 C 55/125/21 IP64 - 55 C to + 125 C P11S - 55 C to + 125 C 55/125/56 IP64 - 55 C to + 150 C
MARKING
* Potentiometer Module VISHAY logo, nominal ohmic value (, k, M), two stars identify P11A version, tolerance in % - variation law, manufacturing date (four digits), "3" for the lead 3 * Switch Module Version, manufacturing date (four digits), "c" for common lead * Indent Module Version, manufacturing date (four digits) Document Number: 51031 Revision: 16-Jun-08
PACKAGING
* Box
For technical questions, contact: sfer@vishay.com
www.vishay.com 2
P11
Vishay Sfernice
12.5 mm Modular Panel Potentiometers Cermet (P11S) or Conductive Plastic Elements (P11A)
PERFORMANCES
TESTS Load Life Temperature Cycle Moisture Rotational Life Climatic Sequence Shock Vibration CONDITIONS 1000 h at + 70 C (90'/30') - 55 C to + 125 C, 5 cycles + 40 C, 93 % relative humidity P11S/P11A: 50 000 cycles Dry heat at + 125 C/damp heat cold - 55 C/damp heat 5 cycles 50 g, 11 ms 3 shocks - 3 directions 10 to 55 Hz 0.75 mm or 10 g, 6 h TYPICAL VALUE AND DRIFTS P11S total resistance shift 2% contact resistance variation 4% total resistance shift 0.2 % 56 days total resistance shift 2% insulation resistance > 1000 M total resistance shift 5% contact resistance variation 5% total resistance shift total resistance shift resistance setting change total resistance shift voltage setting change 1% 0.2 % 0.5 % 0.2 % 0.5 % typical P11A 10 % 5% 0.5 % typical 21 days 5% > 10 M 6% 4% 0.2 % 0.5 % typical 0.2 % 0.5 % typical
SAP ORDERING INFORMATION (Part Number 18 digits)
P 1 1 S 2 Q 0 E A S Y 0 0 1 0 3 M A
MODEL P11
STYLE S= CERMET ELEMENT A= CONDUCTIVE PLASTIC (AUDIO)
NUMBER LOCATING OF BUSHING PEG MODULES 1 2 3 4 5 6 7
SHAFT
SHAFT STYLE
LEADS
RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL
STANDARD RESISTANCE ELEMENT DATA
P11S CERMET STANDARD RESISTANCE VALUES 22 47 50 100 200 470 500 1K 2.2K 4.7K 5K 10K 22K 47K 50K 100K 220K 470K 500K 1M 2.2M 4.7M www.vishay.com 3 LINEAR LAW NON LINEAR LAW P11A CONDUCTIVE PLASTIC LINEAR LAW TYPICAL TCR - 55 C/+ 125 C P11A
MAX. MAX. MAX. CUR. MAX. MAX. MAX. CUR. MAX. MAX. MAX. CUR. POWER WORKING THROUGH POWER WORKING THROUGH POWER WORKING THROUGH P11S AT 70 C VOLTAGE WIPER AT 70 C VOLTAGE WIPER AT 70 C VOLTAGE WIPER W 1 V 4.69 6.85 7.07 10 14.8 21.6 22.4 31.6 46.9 63.5 70.7 100 148 217 224 316 350 350 350 350 350 350 mA 213 146 141 100 67.4 46.1 44.7 31.6 21.3 14.5 14.1 10 6.7 4.6 4.47 3.16 1.59 0.75 0.70 0.35 0.16 0.07 W V mA W V mA
ppm/C
0.5 15.3 15.8 22.4 33.2 48.5 50.0 79.7 105 153 158 224 332 350 350 350 32.7 31.6 22.4 15.1 10.3 10.0 7.07 4.77 3.26 3.16 2.24 1.51 0.74 0.70 0.35 0.5 22.4 33.2 48.5 50.0 79.7 105 153 158 224 332 350 350 22.4 15.1 10.3 10.0 7.07 4.77 3.26 3.16 2.24 1.51 0.74 0.70
150
500
1 0.56 0.26 0.25 0.12 0.05 0.02
0.5 0.26 0.12 0.25
0.5 0.5 0.26 0.25
For technical questions, contact: sfer@vishay.com
Document Number: 51031 Revision: 16-Jun-08
P11
12.5 mm Modular Panel Potentiometers Vishay Sfernice Cermet (P11S) or Conductive Plastic Elements (P11A)
SAP ORDERING INFORMATION (Part Number 18 digits)
P 1 1 S 2 Q 0 E A S Y 0 0 1 0 3 M A
MODEL P11
STYLE
NUMBER OF MODULES A B C D E F G Q T V O 1/4" 1/4" 1/4" 1/4" 1/4" 3/8" 8 7 6 10
BUSHING L Old Codes 1/4" 7, 77, 77-3 3/8" 71 1/2" 72 3/8" 71H 1/2" 72H 3/8" 2, 03, 08 TP QP VP 2P 7P ,,,, 8 Q 8 T 9.5 V, CC, CC-3
LOCATING PEG
SHAFT
SHAFT STYLE
LEADS
RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL
BUSHING DIMENSIONS
A B
PANEL AND SHAFT SEALED: BUSHING G
O 8 (0.315)
8 (0.315)
C
J
6.7 (0.264)
K
All models have the same bushing Dia. 8 mm - L 8 mm
PANEL CUT OUT
Bushings F and V Bushings A, B, C, D, E, T and Q Bushing G
BUSHING D AND E WITH LOCKING NUT
Wrench 10 or 3/8" A B
OH G
G OH
7.2 (0.284) O 8.5 (0.335)
C
J
BUSHINGS A B C J G H Shafts Bushing Lead Versions X.. Y.. K Panel Cutout Threat Wrench Nut Style O O L
T Q DIMENSIONS mm ( 0.5) all Dia. 3 4 8 6 7 8 8 8 6.7 10.4 7.2 8.5 12 5 9.1 5.2 6.5 0.75 8 10 5 9.1 6.2 7.5
G
V 6 10 9.5 7 11.1 8.2 10.5 12
A 1/8" 1/4" 1/4" 0.200 0.357 0.197 0.268 0.313
B C D E DIMENSIONS INCHES ( 0.01) 1/8" 1/8" 1/8" 1/8" 1/4" 1/4" 1/4" 1/4" 3/8" 1/2" 3/8" 1/2" 0.200 0.357 0.197 0.268 0.313 0.200 0.200 0.200 0.357 0.197 0.268 0.313 slotted
F 1/4" 3/8" 3/8" 0.278 0.436 0.323 0.394 0.500
O
0.357 0.357 0.197 0.197 0.268 0.268 32 threads/inch 0.313 0.313 slotted
Notes: * Hardware supplied in separate bags * Slotted bushing for locking nut option Document Number: 51031 Revision: 16-Jun-08 For technical questions, contact: sfer@vishay.com www.vishay.com 4
P11
Vishay Sfernice
12.5 mm Modular Panel Potentiometers Cermet (P11S) or Conductive Plastic Elements (P11A)
SAP ORDERING INFORMATION (Part Number 18 digits)
P 1 1 S 2 Q 0 E A S Y 0 0 1 0 3 M A
MODEL
STYLE
NUMBER OF MODULES
BUSHING
LOCATING PEG Old Codes A= B= C= 0= B24 B30 B53 Without peg
SHAFT
SHAFT STYLE
LEADS
RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL
LOCATING PEGS (Anti-Rotation Lug)
The locating peg is provided by a plate mounted on the bushing and positioned by the module sides. Four set positions are available, clock face orientation: 12, 3, 6, 9.
CODE
VERSION
BUSHING A, B, C, D, E, T, Q 2 6.2 2 7.75 -
BUSHING EFFECTIVE F, V HIGH PEG
O d mm All P11 bushings have a double flat. When panel mounting holes have been punched accordingly, an anti-rotation lug is not necessary. A L mm O d mm B
L 12
2 6.2 2 7.75 3.5 13.5
0.7
0.7
L mm O d mm C
1.1
9
3
L mm
6
Od
Locating pegs are supplied in separate bags with nuts and washers
www.vishay.com 5
For technical questions, contact: sfer@vishay.com
Document Number: 51031 Revision: 16-Jun-08
P11
12.5 mm Modular Panel Potentiometers Vishay Sfernice Cermet (P11S) or Conductive Plastic Elements (P11A)
SAP ORDERING INFORMATION (Part Number 18 digits)
P 1 1 S 2 Q 0 E A S Y 0 0 1 0 3 M A
MODEL
STYLE
NUMBER OF MODULES
BUSHING
LOCATING PEG
SHAFT O L Old Codes AA 3 9.5 K AB 3 12.5 M AJ 3 22 R AP = Custom shaft BA 1/8" 3/8" CK BB 1/8" 1/2" CM BG 1/8" 5/8" CDM BG 1/8" 5/8" CD BH 1/8" 3/4" CH BJ 1/8" 7/8" CR CC = Concentric shaft EA 4 9.5 E EB 4 12.5 F EJ 4 22 G FG 6 16 D FH 6 19 I FL 6 25 N FR 6 50 S GG 1/4" 5/8" VD GH 1/4" 3/4" VHM, VH GJ 1/4" 7/8" VR GL 1/4" 1" VN GO 1/4" 1.5" VL
SHAFT STYLE Slotted Round Flatted Knurled/ K= splined D = Custom S= R= F=
LEADS
RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL
SHAFTS
The shaft length are always measured from the mounting face. Standard shafts are designed by a 3 letter code (3 digits). Shafts slots are aligned to 10 of the wiper position. All standard shafts are slotted except flatted and splined, see exeptions for bushing. FLATTED SHAFT BUSHING: Q SPLINED SHAFT: FHK
O7 O6
BUSHING: SHAFT:
19.1
F GHF
5.5 0.05
BUSHING: SHAFT:
+0
A BGF
O 3.17 - 0.03 2.4 0.05
19
15.9 0.3 at 45
8 0.5
CUSTOM SHAFTS When special shafts are required - flat, threated ends, special shaft lengths, etc. a drawing is required.
+0
O 6.35 - 0.05
8 0.5
STANDARD COMBINATION OF SHAFT STYLES AND BUSHINGS
SHAFT DIA. 3 3.17 3.17 3.17 4 6 6.35 BUSHING' CODE T A B C Q V F SHAFT LENGTH AND STYLE AVAILABLE IN STANDARD (Others on request) AAS ABS AJS BAS BBS BGS BGF BHS BJS BBS BGS BHS BJS BGS BHS BJS EAS EBS EJS FHK FGS FLS FRS GGS GHS GJS GLS GOS GHF For technical questions, contact: sfer@vishay.com www.vishay.com 6
Document Number: 51031 Revision: 16-Jun-08
P11
Vishay Sfernice
12.5 mm Modular Panel Potentiometers Cermet (P11S) or Conductive Plastic Elements (P11A)
SAP ORDERING INFORMATION (Part Number 18 digits)
P 1 1 S 2 Q 0 E A S Y 0 0 1 0 3 M A
MODEL
STYLE
NUMBER OF MODULES
BUSHING
LOCATING PEG
SHAFT
SHAFT STYLE
LEADS Available leads A00 W00 X00 Y00 A10 W10 X03 A13 W20 X04 A14 X10 A20 X13 A23 X14 A24 X20 X23 X24
RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL Z00 Z03 Z04 Z10 Z13 Z14 Z20 Z23 Z24
FIRST DIGIT Soldering lugs - 4.70 mm (0.185") pin spacing X PCB pins Z PCB pins with front support plate Y A PCB pins with front and back support plates W PCB pins - vertical mounting with 2 extra pins - 1 module only
SECOND DIGIT 5.08 mm (0.200") pin spacing for X, Z, W pins section 0.9 x 0.3 mm2 (0.035" x 0.012") 2.54 mm (0.100") pin spacing for X, Z, W 1 pin section 0.6 x 0.3 mm2 (0.024" x 0.012") 5.08 mm (0.200") pin spacing for X, Z, W 2 pins section 0.6 x 0.3 mm2 (0.024" x 0.012") 0
THIRD DIGIT 0 5.08 mm (0.200") space between modules 3 7.62 mm (0.300") space between modules 4 10.16 mm (0.400") space between modules
DIMENSIONS
SOLDER LUGS Y
12.5 (0.492)
5 (0.197) 1.8 (0.07) 2.4 (0.09) 0.9 0.9 (0.035) (0.035)
PCB PIN OUT
X-X2 X1
6.85 (0.270) 3.71 (0.146)
12.5 (0.492) 4.7 (0.185)
13 (0.512) 4.7 (0.185)
J
123 5.08 (0.200)
123 2.54 (0.100)
HORIZONTAL MOUNTING
FRONT AND REAR SUPPORT PLATES
REAR SUPPORT PLATE
VERTICAL MOUNTING
A B 12.7 (0.500)
FRONT SUPPORT PLATE
Z
Z1
Z2 W-W2
C
K
4 (0.157)
W1
E
F
6.35 (0.250)
A/A2
1 2 3 3.81 (0.150) 3.81 (0.150)
A1
123
123 3.81 (0.150)
123 3.81 (0.150) 12.7 (0.500) 1 23 5.08 (0.200) 12 3 2.54 (0.100) 12.7 (0.500)
5.08 (0.200)
5.08 (0.200) 2.54 (0.100)
5.08 (0.200)
THE POSITION OF EACH MODULE IS FREE G T Q V BUSHINGS DIMENSIONS mm ( 0.5) E Leads Z00 3.15 1.85 1.85 3.85 E Leads Z1. Z2. A.. 2.8 1.6 1.6 3.6 F Leads Z0.: 5.08 mm (0.200") J Leads X.. Y.. 6.7 5 5 7 E Leads Z0. with Rotary Switch 1.45 0.15 0.15 2.15 www.vishay.com 7
A 0.071 0.063 0.200 0.006
B C D E DIMENSIONS INCHES ( 0.01) 0.071 0.071 0.071 0.071 0.063 0.063 0.063 0.063 Leads A.. Z1. Z2.: 3.81 mm (0.150") 0.200 0.200 0.200 0.200 0.006 0.006 0.006 0.006
F 0.150 0.140 0.278 0.0846
For technical questions, contact: sfer@vishay.com
Document Number: 51031 Revision: 16-Jun-08
P11
12.5 mm Modular Panel Potentiometers Vishay Sfernice Cermet (P11S) or Conductive Plastic Elements (P11A)
SAP ORDERING INFORMATION (Part Number 18 digits)
P 1 1 S 2 Q 0 E A S Y 0 0 1 0 3 M A
MODEL
STYLE
NUMBER OF MODULES
BUSHING
LOCATING PEG
SHAFT
SHAFT STYLE
LEADS
RESISTANCE CODE/ TOLERANCE/ TAPER OR SPECIAL Resistance Code: 102 = 1 k to 105 = 1 M Tolerance Code: M = 20 %, K = 10 %, J = 5 % Taper: A, L, W, F, S, R or special code given by Vishay
RESISTANCE CODE
See Conversion Table for ohmic value
TOLERANCE
Standard: M = 20 % On request: K = 10 %, J = 5 % (cermet only)
VARIATION LAWS
90 % F R Vs % 50 % Ve S
POWER RATING CHART
Rated Power (W)
P11S Linear Law 1
A
P11S Non Linear Law 0.5 P11A Linear Law 0.25 P11A Non Linear Law 0 0 10 20 30 40 50 60 70 80 90 100 110 120 130
W
20 % 10 % 50 % 15 31
L
Electrical travel 270 Electrical travel with switch 238 Mechanical travel 300
15 31
Ambient Temperature (C)
SPECIAL CODES GIVEN BY VISHAY
CIRCUIT DIAGRAM
a (1) b (2) cw c (3)
OPTION AVAILABLE * Custom shaft * Design on request * Specific linearity * Specific interlinerarity * Specific variation law * Multiple assemblies with various modules
Document Number: 51031 Revision: 16-Jun-08
For technical questions, contact: sfer@vishay.com
www.vishay.com 8
P11
Vishay Sfernice
12.5 mm Modular Panel Potentiometers Cermet (P11S) or Conductive Plastic Elements (P11A)
P11 OPTION: ROTARY SWITCH MODULES
* Rotary switchs * Current up to 2 A * Actuation CW or CCW position
MODULES: RS ON/OFF SWITCH RSI CHANGEOVER SWITCH The position of each module is free. RS and RSI rotary switches are housed in a standard P11 module size 12.7 x 12.7 x 5.08 mm (0.5" x 0.5" x 0.2"). They have the same terminal styles as the assembled electrical modules. An assembly can comprise 1 or more switch modules. Switch actuation is described as seen from the shaft end. D:means actuation in maximum CCW position F:means actuation in maximum CW position The switch actuation travel is 25 with a total mechanical travel of 300 5 and electrical travel of electrical module is 238 10. RDS SINGLE POLE SWITCH, NORMALLY OPEN In full CCW position, the contact between 1 and 3 is open. It is made at the beginning of the travel in CW direction. RSF SINGLE POLE SWITCH, NORMALLY OPEN In full CW position, the contact between 1 and 3 is open. It is made at the beginning of the travel in CCW direction. RSID SINGLE POLE CHANGEOVER In full CCW position, the contact is made between 3 and 2 and open between 3 and 1. Switch actuation (CW direction) reverses these positions. RSIF SINGLE POLE CHANGEOVER In full CW position, the contact is made between 1 and 2 and open between 1 and 3. Switch actuation (CCW direction) reverses these positions.
SWITCH SPECIFICATIONS Switching Power Maximum Switching Current Maximum Maximum Current Through Element Contact Resistance Dielectric Strength Terminal to Terminal Terminal to Bushing 62.5 VA 15 VA = 0.25 A 250 V 0.5 A 30 V = 2A 30 m 1000 VRMS 2000 VRMS 250 V 30 V = 106 M 10 000 actuations 25 - 40 C to + 85 C
Maximum Voltage Operation Insulation Resistance Between Contacts Life at Pmax. Minimal Travel Operating Temperature
ELECTRICAL DIAGRAM
RSD RSF
RSID CCW POSITION
RSIF CW POSITION
1
3
1
2 3*
1* 2
3
Note: * Common
ORDERING INFORMATION (First order only)
RSID
RSD RSF RSID RSIF SPST: Single pole, open switch in CCW position - 2 pins SPST: Single pole, open switch in CW position - 2 pins SPDT: Single pole, changeover switch in CCW position - 3 pins SPDT: Single pole, changeover switch in CW position - 3 pins
www.vishay.com 9
For technical questions, contact: sfer@vishay.com
Document Number: 51031 Revision: 16-Jun-08
P11
12.5 mm Modular Panel Potentiometers Vishay Sfernice Cermet (P11S) or Conductive Plastic Elements (P11A)
P11 OPTION: PUSH/PUSH OR MOMENTARY/PUSH SWITCH MODULES
3.3 (0.013) 40.8 (1.60) ab c 12 3
* Push/push or momentary push
1.3 (0.051) 28 (1.10) 44 (0.15) (0.15) 3.6 (0.14)
* Current up to 2 A
MODULES: PUSH/PUSH SWITCH RSPP MOMENTARY/PUSH SWITCH RSMP They have to be the last element of potentiometer Options: 2 reversing switches F2 6 reversing switches F6 4 reversing switches F4 8 reversing switches F8
SWITCH SPECIFICATIONS Switching Power Maximum Switching Current Maximum Maximum Current Through Element Contact Resistance Dielectric Strength Terminal to Terminal Terminal to Bushing 50 VA 0.5 A 2A 100 m 1500 VRMS 2000 VRMS 250 V 103 M 100 000 actuations 3.3 mm to 4.7 mm - 20 C to + 70 C
Not available with panel sealed option. Number of modules before the switch limited to 3 modules. Length of shaft (FMF) 25 mm maximum. RSPP F2: PUSH/PUSH SWITCH WITH TWO REVERSING SWITCHES Idle position: The contact is made between 1 and 2 and a and b. It is open between 2 and 3 and b and c.
Maximum Voltage Operation Insulation Resistance Between Contacts Life at Pmax. Minimal Travel Operating Temperature
Pushed position: The contact is made between 2 and 3 and b and c. It is open between 1 and 2 and a and b.
ELECTRICAL DIAGRAM
RSPP F2 IDLE POSITION PUSHED POSITION
a
b
c
1
ORDERING INFORMATION (First order only for special code creation)
2
3
RSPP
RSPP: Push/push RSMP: Momentary/push
F2
F2: 2 reversing switches (standard version) F4: 4 reversing switches F6: 6 reversing switches F8: 8 reversing switches
Document Number: 51031 Revision: 16-Jun-08
For technical questions, contact: sfer@vishay.com
www.vishay.com 10
P11
Vishay Sfernice
12.5 mm Modular Panel Potentiometers Cermet (P11S) or Conductive Plastic Elements (P11A)
P11 OPTION: CONCENTRIC SHAFTS
The CC concentric shaft versions allies the total flexibility of the P11 modular system to the advantage of having two separate shafts. The outer 6 mm or 1/4" or 1/8" dia. shaft drives the modules situated immediately behind the panel, before the spacer module. The inner 3 mm or 1/8" or 0.07" dia. shaft drives the modules situated after the spacer module. Spacer is available with a choice of two spacer thickness: 5.08 mm designations or 2.54 mm designation. See dimensional drawing BUSHING CODE V F A OUTER SHAFT DIAMETER DIAMETER 6 6.35 (1/4") 3.17 (1/8") LENGTH L 16 16 12.7 (1/2") SHAFT STYLE R R R DIAMETER 3 3.17 (1/8") 1.8 (0.07")
l L Spacer module 5.08 2.54
INNER SHAFT DIAMETER LENGTH l 28.5 28.5 22.2 (7/8") SHAFT STYLE R R R
ORDERING INFORMATION (First order only for special code creation)
5.08
2.54: Mechanical spacer of 2.54 mm 5.08: Mechanical spacer of 5.08 mm Customer should define witch modules is driven by each shaft (see example of ordering information at the end of the data sheet)
P11 OPTION: DETENT MODULES
The valley detents mechanism is housed in a standard P11 module. Up to 21 detents position available. Count detents as follows: 1 for CCW position, 1 for full CW position, plus the other positions forming equal resistance increments (linear taper) - not equal angles. Available now: CVID - CVIF - CVIM CV3 - CV11 - CV21
CVID CVIM CVIF CV11
270 =n - 1 = + 15
ORDERING INFORMATION (First order only for special code creation)
CV1M
CV1M CV1M J84 CV1D CV1F CV3 CV11 CV21 1 detent at half travel CV1M with accuracy of center point 2 % (all laws except S) 1 detent at CCW position 1 detent at CW position 3 detents 11 detents 21 detents
P11 OPTION: NEUTRAL MODULES "EN"
Neutral or screen module is housed in a standard P11 module. It is used as a screen between two electrical modules. The leads can be connected to ground.
ORDERING INFORMATION (First order only for special code creation)
EN
EN Neutral module For technical questions, contact: sfer@vishay.com Document Number: 51031 Revision: 16-Jun-08
www.vishay.com 11
P11
12.5 mm Modular Panel Potentiometers Vishay Sfernice Cermet (P11S) or Conductive Plastic Elements (P11A)
P11 OPTION: CENTER CURRENT TAP "J"
The extra terminal is a solder lug connected at 50 % of electrical travel and siluated in the potentiometer module opposite the terminals. Center tap short circuit 11 of travel.
ORDERING INFORMATION (First order only)
J
J Center tap
P11 OPTION: SPECIAL LINEARITY - CONFORMITY
E V
V
The independent linearity (conformity for the non linear laws) is the maximum gap V between the actual variation curve and the theorical variation curve the nearest to it. The linearity and the conformity are expressed in percentage of the total applied voltage E V max. linearity conformity = ---------------------E They are measured over 90 % of actual electrical travel (centered). On request linearity can be guaranteed in linear law.
Limits of linearity test Effective electrical travel
ORDERING INFORMATION (First order only)
J123
J123 J145 Linearity 3 % (linear law) Linearity 2 % (linear law) For other request, contact us.
P11 OPTION: SPECIAL INTERLINEARITY - INTERCONFORMITY
E V
It is the maximum deviation between the actual voltage outputs of 2 or more pot modules in the same assembly. It is expressed as a percentage of the total applied voltage, or in dB attenuation. Interlinearity is measured between 2 pot modules, over 10 to 90 % of the attenuation.
V2
C V1
Limits of test Effective electrical travel
The interlinearity or interconformity is expressed as a percentage of the total applied voltage: C I % = -----E Or in decibels by comparison between outputs V1 and V2 V1 I dB = 20 log ----V2
V1
V2
ORDERING INFORMATION (First order only)
J44
J44 Interlinearity 2 % (linear law) For other request, contact us. For technical questions, contact: sfer@vishay.com www.vishay.com 12
Document Number: 51031 Revision: 16-Jun-08
P11
Vishay Sfernice
12.5 mm Modular Panel Potentiometers Cermet (P11S) or Conductive Plastic Elements (P11A)
EXAMPLES OF FIRST ORDER INFORMATION
FIRST EXAMPLE: Triple module (switch is counted as a module)
P
1
1
S
3
Q
0
A
P
S
Y
0
0
BUSHING Q WITHOUT LOCATING CUSTOM SHAFT MODEL STYLE SOLDER LUGS 3 MODULES (O7: L8) SLOTTED P11 S PEG ORDERING INFORMATION: PART NUMBER SHAFT AND BUSHING MODULE NO. 1 MODULE NO. 2 MODULE NO. 3 P11S3Q0APSY00..... See drawing of special shaft attached RSID 103 M A 503 M A J123 J
SPECIAL TO BE DEFINED BY VISHAY
SECOND EXAMPLE: Concentric shaft with 2 modules on each shaft
P
1
1
S
5
V
0
C
C
R
Y
0
0
MODEL STYLE 5 MODULES BUSHING V P11 S (O10: L9,5) ORDERING INFORMATION: PART NUMBER SHAFT AND BUSHING MODULE NO. 1 MODULE NO. 2 MODULE NO. 3 MODULE NO. 4 MODULE NO. 5 CV1M 502 K A 5.08 103 K A 103 K A
WITHOUT LOCATING PEG
STANDARD CONCENTRIC SHAFT CCR
SOLDER LUGS
SPECIAL TO BE DEFINED BY VISHAY
P11S5V0CCRY00.....
Driven by outer shaft Driven by outer shaft Mechanical spacer 5,08 mm J44 J44 Driven by inner shaft Driven by inner shaft
PART NUMBER DESCRIPTION (used on some Vishay document or label, for information only)
P11S MODEL 2 MODULES Q BUSHING 0 EA S Y00 10K 20 % TOL. A TAPER SPECIAL SPECIAL e3 LEAD (Pb)FREE
SHAFT LOCATING LEADS VALUE SHAFT STYLE PEG
www.vishay.com 13
For technical questions, contact: sfer@vishay.com
Document Number: 51031 Revision: 16-Jun-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 18-Jul-08
www.vishay.com 1

▲Up To Search▲

Price & Availability of P11

	To Download P11 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .