 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722 WWW.CONWIN.COM PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS 3.3V SURFACE MOUNT LVPECL CLOCK CW 0729 FPLD52TBG5 155.52M FPLD52TBG5 ABSOLUTE M AXIMUM RATING S PARAMETER Storage Temperature Supply Voltage (Vcc) UNITS MINIMUM -40 -0.5 NOMINAL MAXIMUM 85 7.0 UNITS C Vdc TABLE 2.0 MINIMUM (Fo) 16.384 -50 0 3.135 NOMINAL 3.3 MAXIMUM 400 50 70 3.465 60 5 1 UNITS MHz ppm C Vdc mA ps RMS ps RMS NOTE 1 TABLE 1.0 NOTE DESCRIPTION OPERATING SPECIFIC ATIONS PARAMETER Center Frequency Total Frequency Tolerance Operating Temperature Range Supply Voltage Supply Current Jitter (BW=10Hz to 20MHz) Jitter (BW=12kHz to 20MHz) (Vcc) (Icc) INPUT CHARACTERISTICS PARAMETER Disable Input Voltage (High) Enable Input Voltage (Low) (Vih) (Vil) MINIMUM 2.275 NOMINAL MAXIMUM 1.68 UNITS Vdc Vdc TABLE 3.0 NOTE 2 2 TABLE 4.0 MINIMUM 2.275 45 NOMINAL 50 MAXIMUM 50 1.68 55 1 10 UNITS Ohms Vdc Vdc % ns ms NOTE 3 The Connor-Winfield FPLD52TBG5 is a fixed frequency, surface mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and a 50ppm overall stability. Operating at 3.3V supply voltage, the FPLD52TBG5 provides LVPECL Differential Outputs with Enable/Disable function. FEATURES 3.3V OPERATION - LVPECL OUTPUT CHARACTERISTICS PARAMETER LOAD Voltage (High) (Low) Duty Cycle Rise / Fall Time 20% to 80% Start-up Time LVPECL DIFFERENTIAL OUTPUTS ENABLE / DISABLE FUNCTION PAD 2 LOW JITTER <1pS RMS OVERALL FREQUENCY TOLERANCE: 50ppm TEMPERATURE RANGE: 0 to 70C (Voh) (Vol) 4 PACKAG E CHARACTERISTICS Package TABLE 5.0 Non-hermetic package consisting of an FR4 substrate with grounded metal cover. TABLE 6.0 See solder profile page 2. Ultrasonic cleaning is not recommended. SURFACE MOUNT PACKAGE TAPE AND REEL PACKAGING RoHS 5/6 COMPLIANT PROCESS RECOMMENDATIONS Soldering Process Wash Notes 1) Includes initial tolerance, deviation over temperature, supply and load variations, shock, vibration and 20 years aging. 2) When the oscillator is disabled, the true output is in a low state (Vol) and the complementary output is in the high state (VoH). 3) Output must be terminated into 50 ohms to Vcc - 2V or Thevenin equivalent. 4) Duty Cycle measured at 1.977V. ORDERING INFORMATION FPLD52TBG5 -155.52MHz LVPECL CLOCK SERIES CENTER FREQUENCY DATA SHEET #: Ec238 PAGE 1 OF 2 REV: 01 DATE: 07/27/06 Specifications subject to change without notice. aCopyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722 WWW.CONWIN.COM PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS Package Outline Pin Connections CW FPLD52TBG5 155.52M N/C ENABLE / DISABLE GROUND Q OUTPUT Q OUTPUT Vcc Dimensional Tolerance: .005" (.127mm) Output Waveform Suggested Pad Layout 80% 50% 20% Test Circuit Temperature 225C 183C 150C 100C Solder Profile Ramp-Up Rate 3C/second max. from 150C to 225C. 225C tp Ramp-Down Rate 6C/second max. 2 N/C E/D 25C 0 60-120s Max. 360 Sec. Max. 10-30s 60-150s Max. Time DATA SHEET #: Ec238 PAGE 2 OF 2 REV: 01 DATE: 07/27/06 Specifications subject to change without notice. aCopyright 2001 Connor-Winfield all rights reserved. |
Price & Availability of FPLD52TBG5-15552M
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |