 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| New Product SS22S, SS23S & SS24S Vishay General Semiconductor Surface Mount Schottky Barrier Rectifier FEATURES * Low profile package * Ideal for automated placement * Low forward voltage drop, low power losses * High efficiency * High surge capability DO-214AC (SMA) * Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C * Solder dip 260 C, 40 s * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in low voltage, high frequency inverters, freewheeling, dc-to-dc converters, and polarity protection applications. (Note: These devices are not Q101 qualified.) MECHANICAL DATA Case: DO-214AC (SMA) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: Color band denotes the cathode end PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM VF at IF = 2.0 A TJ max. 2A 20 V, 30 V, 40 V 40 A 0.517 V 150 C MAXIMUM RATINGS (TA = 25 C unless otherwise noted) PARAMETER Device marking code Maximum repetitive peak reverse voltage Maximum average forward rectified current (Fig. 1) Peak forward surge current 10 ms single half sine-wave superimposed on rated load Voltage rate of change (rated VR) Operating junction and storage temperature range VRRM IF(AV) IFSM dV/dt TJ, TSTG SYMBOL SS22S 22S 20 SS23S 23S 30 2.0 40 10 000 - 55 to + 150 SS24S 24S 40 UNIT V V A A V/s C Document Number: 89008 Revision: 19-May-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 New Product SS22S, SS23S & SS24S Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER Instantaneous forward voltage (1) Reverse current (2) Typical junction capacitance TEST CONDITIONS IF = 1 A, IF = 2 A, rated VR 4.0 V, 1 MHz TJ = 25 C TJ = 25 C TJ = 100 C SYMBOL VF IR CJ TYP 0.436 0.517 13 1.65 130 MAX. 0.55 200 8 UNIT V A mA pF Notes: (1) Pulse test: 300 s pulse width, 1 % duty cycle (2) Pulse test: Pulse width 40 ms THERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER Typical thermal resistance (1) Note: (1) P.C.B. mounted with 0.4 x 0.4" (10 x 10 mm) copper pad areas SYMBOL RJA RJL SS22S SS23S 75 25 SS24S UNIT C/W ORDERING INFORMATION (Example) PREFERRED P/N SS24S-E3/61T SS24S-E3/5AT UNIT WEIGHT (g) 0.064 0.064 PREFERRED PACKAGE CODE 61T 5AT BASE QUANTITY 1800 7500 DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 2.4 1.2 Resistive or Inductive Load 2.0 1.0 D = 0.3 D = 0.2 D = 0.1 D = 1.0 D = 0.5 D = 0.8 Average Forward Rectified Current (A) Average Power Loss (W) 1.6 0.8 1.2 0.6 T 0.8 P.C.B. Mounted on 0.4 x 0.4" (10 x 10 mm) Copper Pad Areas 0.4 0.4 0.2 D = tp/T 0 100 125 150 175 0 0.5 1.0 1.5 2.0 tp 2.5 0 0 25 50 75 Lead Temperature (C) Average Forward Current (A) Figure 1. Forward Current Derating Curve Figure 2. Forward Power Loss Characteristics www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 89008 Revision: 19-May-08 New Product SS22S, SS23S & SS24S Vishay General Semiconductor 50 100 000 Instantaneous Reverse Current (A) Peak Forward Surge Current (A) At rated TL 8.3 ms Single Half Sine-Wave 40 TJ = 150 C 10 000 TJ = 125 C 1000 30 20 100 10 10 TJ = 25 C 0 0 10 100 1 10 20 30 40 50 60 70 80 90 100 Number of Cycles at 60 Hz Percent of Rated Peak Reverse Voltage (%) Figure 3. Maximum Non-Repetitive Peak Forward Surge Current Figure 5. Typical Reverse Leakage Characteristics 100 1000 TJ = 25 C f = 1.0 MHz Vsig = 50 mVp-p Instantaneous Forward Current (A) 10 TJ = 125 C Junction Capacitance (pF) 0.9 1.1 1.3 TJ = 150 C 100 1 TJ = 25 C 0.1 0.1 10 0.3 0.5 0.7 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 4. Typical Instantaneous Forward Characteristics Figure 6. Typical Junction Capacitance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AC (SMA) Cathode Band Mounting Pad Layout 0.066 (1.68) MIN. 0.074 (1.88) MAX. 0.065 (1.65) 0.049 (1.25) 0.110 (2.79) 0.100 (2.54) 0.177 (4.50) 0.157 (3.99) 0.012 (0.305) 0.006 (0.152) 0.060 (1.52) MIN. 0.208 (5.28) REF. 0.090 (2.29) 0.078 (1.98) 0.060 (1.52) 0.030 (0.76) 0.008 (0.203) 0 (0) 0.208 (5.28) 0.194 (4.93) Document Number: 89008 Revision: 19-May-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of SS22S08
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |