 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TELEDYNE RELAYS CENTIGRID SURFACE MOUNT COMMERCIAL RELAY DPDT (R) SERIES S172 SERIES DESIGNATION S172 S172D DPDT basic relay RELAY TYPE DPDT relay with internal diode for coil transient suppression INTERNAL CONSTRUCTION DESCRIPTION The S172 Surface Mount Centigrid(R) relay is an ultraminiature, hermetically sealed, armature relay for commercial applications. Its low profile height (.470) and .100" grid spaced terminals, which precludes the need for spreader pads, makes it an ideal choice where extreme packaging density and/or close PC board spacing are required. The specially formed leads are pre-tinned to make the relays ideal for all types of surface mount solder reflow processes. The basic design and internal structure are similar to the Teledyne DPDT Centigrid(R) relay (114 Series). Unique construction features and manufacturing techniques provide overall high reliability and excellent resistance to environmental extremes: * * * * * All welded construction. Unique uni-frame design providing high magnetic efficiency and mechanical rigidity. High force/mass ratios for resistance to shock and vibration. Advanced cleaning techniques provide maximum assurance of internal cleanliness. Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities. UNI-FRAME UPPER STATIONARY CONTACT LOWER STATIONARY CONTACT ARMATURE MOVING CONTACT ENVIRONMENTAL AND PHYSICAL SPECIFICATIONS Temperature (Ambient) Vibration Shock Enclosure Weight Reflow Temperature -55C to +85C 10 g's to 500 Hz (Note 3) 30 g's for 6 msec. (Note 3) half-sine All welded, hermetically sealed 0.15 oz (4.3 gms.) max. 260C max. temp. 5 min. max. above 180C The S172 Series utilizes an internal discrete silicon diodes for coil suppression with electrical characteristics as specified herein. By virtue of its inherently low intercontact capacitance and contact circuit losses, the S172 relay is an excellent subminiature RF switch for frequency ranges well into the UHF spectrum (see Figure 1). Applications include telecommunications, test instruments, mobile communications, attenuators, and automatic test equipment. 94 SERIES S172 GENERAL ELECTRICAL SPECIFICATIONS Contact Arrangement Rated Duty Contact Resistance Contact Load Ratings (DC) (See Fig. 2 for other DC resistive voltage/current ratings) Contact Life Ratings (@ 25C) (Notes 1 & 2) 2 Form C (DPDT) Continuous 0.15 ohm max. before life; 0.3 ohm max. after life at 1A/28VDC, (measured 1/8" from header) Resistive: 1 Amp/28VDC Inductive: 200 mA/28VDC (320 mH) Lamp: 100 mA/28VDC Low Level: 10 to 50 A/10 to 50 mV 5,000,000 cycles (typical) at low level 0,500,000 cycles (typical) at 0.5A/28VDC resistive 0,100,000 cycles min. at all other loads specified above 2A/28VDC Resistive (100 cycles min.) Contact factory 6.0 msec max. at nominal rated coil voltage S172: 3.0 msec max. S172D: 6.0 msec max. 0.4 pf typical 1,000 megohms min. between mutually isolated terminals Atmospheric pressure: 300 VRMS/60 Hz 60 VDC Min. 2.0 VDC Max. (@ 25C) (Note 2) GENERIC PART NUMBERS Coil Voltage (VDC) Coil Resistance (Ohms 20%) Pick-up Voltage (VDC, Max.) Pulse Operation Coil Operating Power at Nominal Voltage (Milliwatts) Nom. Max. Contact Overload Rating Contact Carry Rating Operate Time Release Time lntercontact Capacitance Insulation Resistance Dielectric Strength Diode P.I.V. S172D Negative Coil Transient S172D DETAILED ELECTRICAL SPECIFICATIONS S172-5 S172D-5 5.0 5.8 64 3.8 405 S172-12 S172D-12 12.0 16.0 400 9.0 360 S172-26 S172D-26 26.5 32.0 1600 18.0 440 TYPICAL DC CONTACT RATINGS (RESISTIVE) NOTES: 300 LOAD VOLTAGE (VDC) 250 200 150 100 50 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 LOAD CURRENT (AMPS DC) 1. Characteristics shown as "typical" are based on available data and are best estimates. No on-going verification tests are performed. 2. Unless otherwise specified, parameters are initial values. 3. Relay contacts will exhibit no chatter in excess of 10 sec or transfer in excess of 1 sec. 4. Position of leads as they emerge from relay base. 5. Leads will fit noted pad layout with no overhang. 6. Lead ends are coplanar within .008" wide tolerance zone. 7. Terminals coated with SN60 or SN63 solder per QQ-S-571. Base material exposed at sheared end of leads. FIGURE 2 OUTLINE DIMENSIONS AND RECOMMENDED PAD LAYOUT (Notes 4, 5, 6 & 7) .031 REF (.79) .335 MAX (8.51) .035 REF (.89) 4 MAX TYP 4 MAX TYP .045 MIN 8 PL (1.14) .370** MAX (9.40) .100 TYP (2.54) .375 SQ MAX (9.53) +.030 .378 -.020 TYP (9.60 +.76 ) -.51 .200 (5.08) .200 (5.08) .410 MIN (10.41) 7 8 (-) 1 5 4 3 6 2 TERMINAL LOCATIONS AND SCHEMATIC DIAGRAMS .100 4 PL (2.54) 7 8 1 S172 .280 MAX* (7.11) O.017 REF (.43) 2 2 TYP .200 (5.08) 6 2 * Unless otherwise specified .280" or .380" height may be supplied. To order the lower profile, add /28 to the part number. e.g. 172-26/28 (NOTE: /28 will not be marked on relay). Unless otherwise specified, relays may be supplied with either can height. ** Max. overall height for the higher profile S172 will be .470 (11.94) RECOMMENDED PAD LAYOUT (NOTE 5) ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) 5 4 (+) 3 S172D (c)1996 TELEDYNE RELAYS 95 12525 Daphne Avenue Hawthorne, California 90250 |
Price & Availability of S172D-12
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |