View 19-217W1D-DP1Q2QY3T_4232984.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet 0603 Package Chip LED (0.4mm Height)
19-217/W1D-DP1Q2QY/3T
Features
Package in 8mm tape on 7diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. The product itself will remain within RoHS compliant version.
Descriptions
The 19-217 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc.
Applications
Automotive: backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use.
Device Selection Guide Part No.
19-217/W1D-DP1Q2QY/3T
Chip
Material InGaN
Emitted Color Pure White
Lens Color
Yellow Diffused
Everlight Electronics Co., Ltd. Device No:DSE-197-W19
http://www.everlight.com Prepared date: 27-Jul-2005
Rev 1
Page: 1 of 12
Prepared by: Kenny Wang
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/W1D-DP1Q2QY/3T
Package Outline Dimensions
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. Device No:DSE-197-W19
http://www.everlight.com Prepared date: 27-Jul-2005
Rev 1
Page: 2 of 12
Prepared by: Kenny Wang
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/W1D-DP1Q2QY/3T
Absolute Maximum Ratings (Ta=25)
Parameter Reverse Voltage Forward Current Operating Temperature Storage Temperature Soldering Temperature Electrostatic Discharge Power Dissipation Peak Forward Current (Duty 1/10 @1KHz) Soldering Temperature Symbol VR IF Topr Tstg Tsol ESD Pd IFP Rating 5 25 -40 ~ +85 -40 ~ +90 260 (for10seconds) 150 110 100 Unit V mA V mW mA
Reflow Soldering : 260 for 10 sec. Tsol Hand Soldering : 350 for 3 sec.
Notes: *We only guarantee the ESD <2000V after customer to process.
Everlight Electronics Co., Ltd. Device No:DSE-197-W19
http://www.everlight.com Prepared date: 27-Jul-2005
Rev 1
Page: 3 of 12
Prepared by: Kenny Wang
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/W1D-DP1Q2QY/3T
Electro-Optical Characteristics (Ta=25)
Parameter
Luminous Intensity Viewing Angle Forward Voltage
Symbol Iv 21/2 VF IR
Min. 45.0 ----2.70 -----
Typ. ----130 ---------
Max. 112.0 ----3.20 50
Unit mcd deg V A
Condition
IF=5mA
Reverse Current
VR=5V
Bin Range Of Luminous Intensity & Forward Voltage
Symbol Bin Code P1 IV P2 Q1 Q2 29 30 VF 31 32 33 Min. 45.0 57.0 72.0 90.0 2.7 2.8 2.9 3.0 3.1 Max. 57.0 72.0 90.0 112 2.8 2.9 3.0 3.1 3.2 V IF=5mA mcd Unit Condition
Notes:
1.Tolerance of Luminous Intensity 10% 2.Tolerance of Forward Voltage 0.05V
Everlight Electronics Co., Ltd. Device No:DSE-197-W19
http://www.everlight.com Prepared date: 27-Jul-2005
Rev 1
Page: 4 of 12
Prepared by: Kenny Wang
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/W1D-DP1Q2QY/3T
Chromaticity Coordinates Specifications for Bin Grading Group Bin Code CIE_x 0.254 0.254 0.274 0.274 0.254 0.254 0.274 0.274 0.274 0.274 0.294 0.294 0.274 0.274 0.294 0.294 CIE_y 0.230 0.263 0.258 0.291 0.198 0.230 0.226 0.258 0.226 0.258 0.286 0.254 0.258 0.291 0.319 0.286
Condition
X2
X1
D
1
IF=5mA
2
Notes:
1.The C.I.E. 1931 chromaticity diagram ( Tolerance 0.01). 2.The products are sensitive to static electricity and care must be fully taken when handling products.
Everlight Electronics Co., Ltd. Device No:DSE-197-W19
http://www.everlight.com Prepared date: 27-Jul-2005
Rev 1
Page: 5 of 12
Prepared by: Kenny Wang
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/W1D-DP1Q2QY/3T CIE Chromaticity Diagram
Everlight Electronics Co., Ltd. Device No:DSE-197-W19
http://www.everlight.com Prepared date: 27-Jul-2005
Rev 1
Page: 6 of 12
Prepared by: Kenny Wang
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/W1D-DP1Q2QY/3T
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd. Device No:DSE-197-W19
http://www.everlight.com Prepared date: 27-Jul-2005
Rev 1
Page: 7 of 12
Prepared by: Kenny Wang
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/W1D-DP1Q2QY/3T
Label explanation
CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is 0.1mm , Unit = mm
Everlight Electronics Co., Ltd. Device No:DSE-197-W19
http://www.everlight.com Prepared date: 27-Jul-2005
Rev 1
Page: 8 of 12
Prepared by: Kenny Wang
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/W1D-DP1Q2QY/3T
Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel
Note: The tolerances unless mentioned is 0.1mm,Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd. Device No:DSE-197-W19
http://www.everlight.com Prepared date: 27-Jul-2005
Rev 1
Page: 9 of 12
Prepared by: Kenny Wang
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/W1D-DP1Q2QY/3T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10%
No. 1
Items Reflow Soldering
Test Condition Temp. : 2605 Min. 5sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Temp. : -40 IF = 20 mA 85/ 85%RH
Test Sample Hours/Cycles Size 6 Min. 300 Cycles 22 PCS.
Ac/Re 0/1
2
Temperature Cycle
22 PCS.
0/1
3
Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity
300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs.
22 PCS.
0/1
4 5 6 7
22 PCS. 22 PCS. 22 PCS. 22 PCS.
0/1 0/1 0/1 0/1
Everlight Electronics Co., Ltd. Device No:DSE-197-W19
http://www.everlight.com Prepared date: 27-Jul-2005
Rev 1
Page: 10 of 12
Prepared by: Kenny Wang
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/W1D-DP1Q2QY/3T
Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd. Device No:DSE-197-W19
http://www.everlight.com Prepared date: 27-Jul-2005
Rev 1
Page: 11 of 12
Prepared by: Kenny Wang
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/W1D-DP1Q2QY/3T
4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com
Everlight Electronics Co., Ltd. Device No:DSE-197-W19
http://www.everlight.com Prepared date: 27-Jul-2005
Rev 1
Page: 12 of 12
Prepared by: Kenny Wang

▲Up To Search▲

Price & Availability of 19-217W1D-DP1Q2QY3T

	To Download 19-217W1D-DP1Q2QY3T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .