 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| IRL3103D2PBF l l l l l l PD-95435 Copackaged HEXFET(R) Power MOSFET and Schottky Diode Generation 5 Technology Logic Level Gate Drive Minimize Circuit Inductance Ideal For Synchronous Regulator Application Lead-Free FETKYTM MOSFET & SCHOTTKY RECTIFIER D VDSS = 30V RDS(on) = 0.014 G ID = 54A S Description The FETKY family of copackaged HEXFET power MOSFETs and Schottky Diodes offer the designer an innovative board space saving solution for switching regulator applications. A low on resistance Gen 5 MOSFET with a low forward voltage drop Schottky diode and minimized component interconnect inductance and resistance result in maximized converter efficiencies. The TO-220 package is universally preferred for all commercial-industrial applications at power dissipation levels to approximately 50 watts. The low thermal resistance and low package cost of the TO-220 contribute to its wide acceptance throughout the industry. TO-220AB Absolute Maximum Ratings Parameter ID @ TC = 25C ID @ TC = 100C IDM PD @TA = 25C PD @TC = 25C VGS TJ TSTG Continuous Drain Current, VGS @ 10V Continuous Drain Current, VGS @ 10V Pulsed Drain Current Power Dissipation Power Dissipation Linear Derating Factor Gate-to-Source Voltage Operating Junction and Storage Temperature Range Soldering Temperature, for 10 seconds Mounting torque, 6-32 or M3 srew Max. 54 34 220 2.0 70 0.56 16 -55 to + 150 300 (1.6mm from case ) 10 lbfin (1.1Nm) Units A W W W/C V C Thermal Resistance Parameter RJC RJA Junction-to-Case Junction-to-Ambient Typ. Max. 1.8 62 Units C/W 06/22/04 IRL3103D2PBF MOSFET Electrical Characteristics @ TJ = 25C (unless otherwise specified) V(BR)DSS V(BR)DSS/TJ Parameter Drain-to-Source Breakdown Voltage Breakdown Voltage Temp. Coefficient Static Drain-to-Source On-Resistance Gate Threshold Voltage Forward Transconductance Drain-to-Source Leakage Current Gate-to-Source Forward Leakage Gate-to-Source Reverse Leakage Total Gate Charge Gate-to-Source Charge Gate-to-Drain ("Miller") Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Internal Drain Inductance Internal Source Inductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Input Capacitance RDS(on) VGS(th) gfs IDSS IGSS Qg Qgs Qgd td(on) tr td(off) tf LD LS Ciss Coss Crss Ciss Min. 30 1.0 23 Typ. 0.037 9.0 210 20 54 4.5 7.5 2300 1100 310 3500 Max. Units Conditions V V GS = 0V, ID = 250A V/C Reference to 25C, ID = 1mA 0.014 V GS = 10V, ID = 32A 0.019 V GS = 4.5V, ID = 27A V V DS = V GS, ID = 250A S V DS = 25V, ID = 34A 0.25 V DS = 30V, VGS = 0V mA 35 V DS = 24V, VGS = 0V, TJ = 125C 100 V GS = 16V nA -100 V GS = -16V 44 I D = 32A 14 nC V DS = 24V 24 V GS = 4.5V, See Fig. 6 V DD = 15V ID = 34A ns R G = 3.4, V GS =4.5V R D = 0.43 , Between lead, 6mm (0.25in.) nH G from package and center of die contact V GS = 0V V DS = 25V pF = 1.0MHz, See Fig. 5 V GS = 0V, VDS = 0V D S Body Diode & Schottky Diode Ratings and Characteristics Parameter IF (AV) ISM Min. Typ. Max. Units ( Schottky) Pulsed Source Current (Body Diode) Diode Forward Voltage Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Forward Turn-On Time VSD1 VSD2 trr Qrr ton Conditions MOSFET symbol 5.0 showing the A integral reverse 220 p-n junction and Schottky diode. 1.3 V TJ = 25C, IS = 32A, VGS = 0V 0.6 V TJ = 25C, IS = 3.0A, VGS = 0V 51 77 ns TJ = 25C, IF = 32A 47 71 nC di/dt = 100A/s Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD) D G S Notes: Repetitive rating; pulse width limited by max. junction temperature. ( See fig. 10 ) Pulse width 300s; duty cycle 2%. Uses IRL3103 data and test conditions IRL3103D2PBF 1000 VGS 15V 12V 10V 8.0V 6.0V 4.0V 3.0V BOTTOM 2.5V TOP 1000 100 ID , Drain-to-Source Current (A) ID , Drain-to-Source Current (A) VGS 15V 12V 10V 8.0V 6.0V 4.0V 3.0V BOTTOM 2.5V TOP 100 10 10 2.5V 2.5V 1 0.1 20s PULSE WIDTH T J = 25C 1 10 A 100 1 0.1 20s PULSE WIDTH TJ = 150C 1 10 A 100 VDS , Drain-to-Source Voltage (V) VDS , Drain-to-Source Voltage (V) Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics 30 30 IS, Source-to-Drain Current ( A ) 20 IS, Source-to-Drain Current ( A ) VGS 10V 8.0V 6.0V 4.0V 2.0V BOTTOM 0.0V TOP 20 0.0V 10 VGS 10V 8.0V 6.0V 4.0V 2.0V BOTTOM 0.0V TOP 0.0V 10 0 0.0 20s PULSE WIDTH TC = 25C 0.2 0.4 0.6 0.8 1.0 A 0 0.0 20s PULSE WIDTH TC = 150C 0.2 0.4 0.6 0.8 A VDS, Drain-to-Source Voltage (V) VDS, Drain-to-Source Voltage (V) Fig 3. Typical Reverse Output Characteristics Fig 4. Typical Reverse Output Characteristics IRL3103D2PBF 5000 VGS , Gate-to-Source Voltage (V) C, Capacitance ( pF ) 4000 V GS = 0V, f = 1MHz C iss = C gs + C gd , C ds SHORTED C rss = C gd C oss = C ds + C gd 15 ID = 32A VDS = 24V VDS = 15V 12 3000 9 Ciss Coss 2000 6 1000 3 Crss 0 1 10 100 A 0 0 20 40 60 80 VDS , Drain-to-Source Voltage (V) QG , Total Gate Charge (nC) Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage 60 1000 I D , Drain-to-Source Current (A) 50 ID , Drain Current (A) TJ = 25C 100 40 TJ = 150C 30 20 10 10 0 25 50 75 100 125 150 1 2.0 3.0 4.0 5.0 VDS = 15V 20s PULSE WIDTH 6.0 7.0 8.0 9.0 A TC , Case Temperature ( C) VGS , Gate-to-Source Voltage (V) Fig 7. Maximum Drain Current Vs. Case Temperature Fig 8. Typical Transfer Characteristics IRL3103D2PBF 2.0 RDS(on) , Drain-to-Source On Resistance (Normalized) ID = 54A 1.5 1.0 0.5 0.0 -60 -40 -20 VGS = 10V 0 20 40 60 80 100 120 140 160 TJ , Junction Temperature ( C) Fig 9. Normalized On-Resistance Vs. Temperature 10 Thermal Response (ZthJC ) 1 D = 0.50 0.20 0.10 0.1 P DM 0.05 0.02 0.01 SINGLE PULSE (THERMAL RESPONSE) Notes: 1. Duty factor D = t /t t 1 t2 1 2 0.01 0.00001 2. Peak TJ = P DM x Z thJC + T C A 1 0.0001 0.001 0.01 0.1 t 1 , Rectangular Pulse Duration (sec) Fig 10. Maximum Effective Transient Thermal Impedance, Junction-to-Case IRL3103D2PBF TO-220AB Package Outline Dimensions are shown in millimeters (inches) 10.54 (.415) 10.29 (.405) 3.78 (.149) 3.54 (.139) -A6.47 (.255) 6.10 (.240) -B4.69 (.185) 4.20 (.165) 1.32 (.052) 1.22 (.048) 2.87 (.113) 2.62 (.103) 4 15.24 (.600) 14.84 (.584) LEAD ASSIGNMENTS 1.15 (.045) MIN 1 2 3 LEAD ASSIGNMENTS IGBTs, CoPACK 1 - GATE 2 1- GATE- DRAIN 1- GATE 32- DRAINSOURCE 2- COLLECTOR 3- SOURCE 3- EMITTER 4 - DRAIN HEXFET 14.09 (.555) 13.47 (.530) 4- DRAIN 4.06 (.160) 3.55 (.140) 4- COLLECTOR 3X 3X 1.40 (.055) 1.15 (.045) 0.93 (.037) 0.69 (.027) M BAM 3X 0.55 (.022) 0.46 (.018) 0.36 (.014) 2.54 (.100) 2X NOTES: 1 DIMENSIONING & TOLERANCING PER ANSI Y14.5M, 1982. 2 CONTROLLING DIMENSION : INCH 2.92 (.115) 2.64 (.104) 3 OUTLINE CONFORMS TO JEDEC OUTLINE TO-220AB. 4 HEATSINK & LEAD MEASUREMENTS DO NOT INCLUDE BURRS. TO-220AB Part Marking Information E X AMP L E : T H IS IS AN IR F 1010 L OT CODE 1789 AS S E MB L E D ON WW 19, 1997 IN T H E AS S E MB L Y L INE "C" INT E R NAT ION AL R E CT IF IE R L OGO AS S E MB L Y L OT CODE P AR T NU MB E R Note: "P" in assembly line position indicates "Lead-Free" DAT E CODE YE AR 7 = 1997 WE E K 19 L INE C Data and specifications subject to change without notice. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. 06/04 Note: For the most current drawings please refer to the IR website at: http://www.irf.com/package/ |
Price & Availability of IRL3103D2PBF
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |