View MKP3382_4167683.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

BCcomponents
DATA SHEET
MKP 338 2 Interference suppression film capacitors
Product specification Supersedes data of 2000-06-08 File under BCcomponents, BC05 2000 Sep 11
BCcomponents
Product specification
Interference suppression film capacitors
MKP RADIAL POTTED TYPE
MKP 338 2
PITCH 7.5/10/15/22.5/27.5 mm PITCH 7.5 mm (bent back leads)
296x12(full_width)
P = 7.5, 10 and 15 mm
P(bent back leads) = 7.5 mm
P = 22.5 and 27.5 mm
CBA899
Fig.1 Simplified outlines.
FEATURES * 7.5 to 27.5 mm lead pitch * Supplied loose in box, taped on ammopack or reel * Consists of a low-inductive wound cell of metallized polypropylene film, potted in a flame-retardant case. APPLICATIONS * For X2 electromagnetic interference suppression * Specially designed to meet the REQUIREMENTS of the "IEC 60384-14 2nd edition and EN 132400", requiring for X2 a 2.5 kV peak pulse voltage test and both UL1414 and CSA-C22.2 No 1 specifications. DETAIL SPECIFICATION For more detailed data and test requirements see "Type detail specification HQN-384-14/111".
QUICK REFERENCE DATA DESCRIPTION Capacitance range (E12 series) Capacitance tolerance Rated (AC) voltage, 50 to 60 Hz Rated (DC) voltage Climatic category Rated temperature Maximum application temperature Reference specifications Safety approvals: 250 V 275 V CSA-C22.2 No 1; UL1414; note 2 CSA-C22.2 No 8; note 1 SEV; VDE; FI; N; D; S; IMQ; OVE; CCEE; note 2 305 V Materials Safety class Notes 1. Pending. 2. Approved. UL1283; note 2 qualified in accordance with UL94V-O X2 1 nF to 3.3 F 20%; 10%; 5% 275 V 630 V 55/105/56/B 105 C 105 C IEC 60384-14 2nd edition and EN 132400 VALUE
2000 Sep 11
2
BCcomponents
Product specification
Interference suppression film capacitors
SAFETY APPROVALS SAFETY APPROVALS (X2) UL1414 VOLTAGE 250 V (AC) VALUE 1 nF to 1 F
MKP 338 2
FILE NUMBERS E112471
UL1283
305 V (AC)
1 nF to 3.3 F
E109565
CSA-C22.2 No.1
250 V (AC)
1 nF to 1 F
LR94054
CSA-C22.2 No.8
275 V (AC)
1 nF to 3.3 F
pending
SEV (EN132400)
275 V (AC)
1 nF to 3.3 F
99,6 60107,02
V DE
VDE (EN132400)
275 V (AC)
1 nF to 3.3 F
115223
FI (EN132400)
275 V (AC)
1 nF to 3.3 F
FI 11681
N
D
NEMKO (EN132400)
275 V (AC)
1 nF to 3.3 F
P99102661
DEMKO (EN132400)
275 V (AC)
1 nF to 3.3 F
99-03462
SEMKO (EN132400)
275 V (AC)
1 nF to 3.3 F
9839136/02
IMQ (EN132400)
275 V (AC)
1 nF to 3.3 F
V4693
.. OVE
OVE (EN132400)
275 V (AC)
1 nF to 3.3 F
E260-009
CCEE
275 V (AC)
1 nF to 3.3 F
CH0038043-99
2000 Sep 11
3
BCcomponents
Product specification
Interference suppression film capacitors
COMPOSITION OF CATALOGUE NUMBER TYPE AND PITCHES 7.5 mm 7.5 mm (bent back) 338 2 10.0 mm 15.0 mm 22.5 mm 27.5 mm Example: CAPACITANCE (numerically)
MKP 338 2
MULTIPLIER (nF) 0.1 1 10 100 2 3 4 5
X2
104 = 10 x 10 = 100 nF
2222
338
2X XX X
TYPE 338 2
PACKAGING(1) loose in box taped
X2
STANDARD DIMENSIONS lead length 3.5 mm lead length 5.0 mm lead length 25.0 mm pitch = 7.5 mm or bent back to 7.5 mm
20%
PREFERRED TYPES 2222 338 20... 2222 338 22... see Handbook 2222 338 24... 2222 338 26... ON REQUEST 2222 338 21... 2222 338 23... see Datasheet 2222 338 25... 2222 338 27... ON REQUEST 2222 338 2.... 2222 338 2.... 2222 338 2.... 2222 338 2.... see Type 2222 338 2.... detail 2222 338 2.... specification 2222 338 2.... 2222 338 2.... 2222 338 2.... 2222 338 2....
338 2
loose in box taped
X2
ALTERNATIVE LARGER PITCH SIZES lead length 3.5 mm lead length 5.0 mm 20% lead length 25.0 mm H = 18.5 mm; for P0 = 12.7 mm; note 2 ALTERNATIVE C-TOL lead length 3.5 mm 10% 5% 10% 5% 10% 5% 10% 5% 10% 5%
loose in box 338 2
lead length 5.0 mm lead length 25.0 mm pitch = 7.5 mm or bent back to 7.5 mm
X2
taped
H = 18.5 mm; for P0 = 12.7 mm; note 2
Notes 1) For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2) H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information".
2000 Sep 11
4
BCcomponents
Product specification
Interference suppression film capacitors
MKP 338 2 GENERAL DATA
MKP 338 2
PITCH 7.5/10 mm PITCH 7.5 mm (bent back leads)
l 296x12(full_width) h
b
l
b
h h' F' Odt (1) F H 10 Odt
lt P
15
CBA859
(1) F - F' < 0.3 mm F = 7.5 +0.6/-0.1 mm
Fig.3 Outline.
Specific reference data for the 275 V AC (X2) capacitors VALUE DESCRIPTION at 1 kHz Tangent of loss angle: C 100 nF Rated voltage pulse slope (dU/dt)R at 385 V (DC) R between leads, for C 0.33 F at 100 V; 1 minute R between leads and case; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s: Withstanding (AC) voltage between leads and case 10 x 10-4 20 x 10-4 100 V/s >15000 M >30000 M 2200 V; 1 minute 2050 V; 1 minute 100 x 10-4 at 10 kHz at 100 kHz
2000 Sep 11
5
BCcomponents
Product specification
Interference suppression film capacitors
URac = 275 V (X2); URdc = 630 V CATALOGUE NUMBER LOOSE IN BOX C (F) DIMENSIONS(1) b x h (h') x l (mm) MASS (g) short leads lt = 3.5+1/-0.5 mm lt = 5.0 1.0mm C-tol = 20% catalogue Pitch = 7.5 0.4 mm; dt = 0.50 0.05 mm 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.01 0.015 0.022 0.033 0.047 5.0 x 10.5 x 10.0 6.0 x 11.5 x 10.0 0.9 1.0 4.0 x 9.0 x 10.0 0.5 2222 338 20102 2222 338 20152 2222 338 20222 2222 338 20332 2222 338 20472 2222 338 20682 2222 338 20103 2222 338 20153 2222 338 20223 2222 338 20333 2222 338 20473 .. 22102 .. 22152 .. 22222 .. 22332 .. 22472 .. 22682 .. 22103 .. 22153 .. 22223 .. 22333 .. 22473 .. 24102 .. 24152 .. 24222 .. 24332 .. 24472 .. 24682 .. 24103 .. 24153 .. 24223 .. 24333 .. 24473 number(3) last 5 digits(3) long leads lt = 25.0 2.0mm
MKP 338 2
AMMOPACK OR REEL(2)
C-tol = 20% last 5 digits(3) ammopack; pitch = 7.5 mm; dt = 0.50 mm .. 26102 .. 26152 .. 26222 .. 26332 .. 26472 .. 26682 .. 26103 .. 26153 .. 26223 .. 26333 .. 26473 reel; pitch = 7.5 mm (bent back); dt = 0.60 mm
Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm
0.068 0.1 Notes
6.0 x 12.0 (14.0) x 12.5
1.3
2222 338 20683 2222 338 20104
.. 22683 .. 22104
.. 24683 .. 24104
.. 26683 .. 26104
1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". a) For pitch = 7.5 mm: H = 18.5 mm and P0 = 12.7 mm. b) For pitch = 7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. The reel diameter = 500 mm; reel diameter = 356 mm is available on request. 3. The shading indicates preferred types.
2000 Sep 11
6
BCcomponents
Product specification
Interference suppression film capacitors
MKP 338 2 GENERAL DATA
MKP 338 2
PITCH 15/22.5/27.5 mm PITCH 7.5 mm (bent back leads)
296x12(full_width)
l
b
l
b
h
h h'
lt P Odt 10
F' (1) F H Odt
15
(1) F - F' < 0.3 mm F = 7.5 +0.6/-0.1 mm
CBA750
Fig.4 Outline.
Specific reference data for the 275 V AC (X2) capacitors VALUE DESCRIPTION at 1 kHz Tangent of loss angle: 100 nF < C 470 nF 470 nF < C 1 F C > 1 F Rated voltage pulse slope (dU/dt)R at 385 V (DC) R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between leads and case; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s: C 1 F C > 1 F Withstanding (AC) voltage between leads and case 2200 V; 1 minute 1800 V; 1 minute 2050 V; 1 minute 10 x 10-4 20 x 30 x 10-4 10-4 20 x 10-4 70 x 10-4 100 x 10-4 at 10 kHz at 100 kHz
- -
-
100 V/s >15000 M >5000 s >30000 M
2000 Sep 11
7
BCcomponents
Product specification
Interference suppression film capacitors
URac = 275 V (X2); URdc = 630 V CATALOGUE NUMBER LOOSE IN BOX C (F) DIMENSIONS(1) b x h (h') x l (mm) short leads MASS (g) lt = 3.5 0.3 mm lt = 5.0 1.0 mm C-tol = 20% catalogue Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm number(4) last 5 digits(4) long leads lt = 25.0 2.0 mm
MKP 338 2
REEL(2)(3)
C-tol = 20% last 5 digits(4) pitch = 7.5 mm (bent back); dt = 0.80 mm
0.15 0.22 0.33
7.0 x 13.5 (15.5) x 17.5 8.5 x 15.0 (17.0) x 17.5 10.0 x 16.5 (18.5) x 17.5 8.5 x 18.0 x 26.0 10.0 x 19.5 x 26.0 12.0 x 22.0 x 26.0 15.0 x 25.0 x 31.0 18.0 x 28.0 x 31.0 21.0 x 31.0 x 31.0
1.9 2.6 3.1
2222 338 20154 2222 338 20224 2222 338 20334
.. 22154 .. 22224 .. 22334
.. 24154 .. 24224 .. 24334
.. 26154 .. 26224 .. 26334
Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm 0.47 0.68 1 4.4 5.5 7.8 2222 338 20474 2222 338 20684 2222 338 20105 .. 22474 .. 22684 .. 22105 .. 24474 .. 24684 .. 24105 not available
Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 1.5 2.2 3.3 Notes 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter "Packaging information". 3. For pitch = 7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. The reel diameter = 500 mm; reel diameter = 356 mm is available on request. 4. The shading indicates preferred types. 12.8 17.2 20.4 2222 338 20155 2222 338 20225 2222 338 20335 .. 22155 .. 22225 .. 22335 .. 24155 .. 24225 .. 24335 not available
2000 Sep 11
8
BCcomponents
Product specification
Interference suppression film capacitors
CONSTRUCTION Description * Low-inductive wound cell of metallized polypropylene (PP) film, potted with epoxy resin in a flame-retardant case * Radial leads, solder-coated: - Copper clad steel wire for original pitch = 7.5 and 10 mm - Copper wire for original pitch = 15, 22.5 and 27.5 mm * Small stand-off pips allow removal of solder flux etc. during cleaning of the printed-circuit board.
MKP 338 2
SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION
AND SHOCK
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board: * For pitches 15 mm capacitors shall be mechanically fixed by the leads. * For larger pitches the capacitors shall be mounted in the same way and the body clamped. SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD The maximum length and width of film capacitors is shown in Fig.6: * Eccentricity as in Fig.6. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. * Product height with seating plane as given by "IEC 60717" as reference: hmax h + 0.3 mm or hmax h' + 0.3 mm.
144x12(halfpage)
MKP metallized polypropylene film
144x12(halfpage) metal spray layer eccentricity connecting wire
CBA198
bmax = b + 0.3 mm
lmax = l + 0.3 mm
CBA116
Fig.5 Construction. Fig.6 Lay-out. Mounting NORMAL USE The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to this handbook, chapter "Packaging information". Storage temperature * Storage temperature: Tstg = -25 to +40 C with RH maximum 80% without condensation. RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified, all electrical values apply to an ambient temperature of 23 1 C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 2%. For reference testing, a conditioning period shall be applied over 96 4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%.
2000 Sep 11
9
BCcomponents
Product specification
Interference suppression film capacitors
CHARACTERISTICS Capacitance
MKP 338 2
CBA505
296x12(full_width) 4 C/C (%) 2 typical
0
max. -2
-4
-6 -50
min. 0 50 Tamb (C) 100
Fig.7 Capacitance change at 1 kHz as a function of temperature. Tangent of loss angle
296x12(full_width) 10 3 dissipation factor (x 10-4)
CBA212
10 2
220 n
F 1 C> 1F C F<
C 220 nF
4
< 7 nF
10 1
10 n
nF 47 F10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.8 Tangent of loss angle as a function of frequency: typical curves.
2000 Sep 11
10
BCcomponents
Product specification
Interference suppression film capacitors
Impedance
MKP 338 2
296x12(full_width) 10 3 Impedance () 10
2
CBA857
1 nF 4.7 10 nnF F
10
1
47 n F 100 nF
470 nF
10 0
100 330
0 nF
0 nF
10-1
10-2 10 4
10 5
10 6
10 7
f (Hz)
10 8
Fig.9 Impedance as a function of frequency: typical curves for 20% values. Resonant frequency
2 296x12(full_width) 10
CBA858
f (MHz)
10 1
X2 10 0
10-1 1nF 10 nF 100 nF 1000 nF C (nF)
Fig.10 Resonant frequency as a function of capacitance: typical curves for 20% values.
2000 Sep 11
11
BCcomponents
Product specification
Interference suppression film capacitors
MKP 338 2
Maximum RMS voltage and AC current (sinewave) as a function of frequency for Tamb 105 C
296x12(full_width) 10 3 AC voltage (V)
CBA723
10 2
10 1 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.11 AC voltage (RMS value) as a function of frequency at Tamb 105 C.
296x12(full_width) 10 3 AC current (mA)
CBA724
3300 nF
1000 nF 10
2
470 nF
100 nF 10 1 47 nF
10 nF 10
0
4.7 nF
1nF 10
-1
10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.12 AC current (RMS value) as a function of frequency at Tamb 105 C.
2000 Sep 11
12
BCcomponents
Product specification
Interference suppression film capacitors
Insulation resistance
MKP 338 2
296x12(full_width) 10 6 RC (s)
CBA204
10 5
10 4 0 20 40 60 80 Tamb(C) 100
Fig.13 RC product as a function of ambient free air temperature: typical curve.
APPLICATION NOTES * For X2 electromagnetic interference suppression in across the line applications (50/60 Hz) with a maximum mains voltage of 275 V (AC). * These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse program must be used, such as: 2222 375 .....; 2222 383 ..... or 2222 479 ..... * The maximum ambient temperature must not exceed 105 C. * Rated voltage pulse slope: - If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 385 V (DC) and divided by the applied voltage.
2000 Sep 11
13
BCcomponents
Product specification
Interference suppression film capacitors
MARKING Product marking The capacitors are marked by laser print (see Figs 14 to 16) with the following information: 1. Rated capacitance code in accordance with "IEC 60062" 2. Tolerance on rated capacitance; M = 20%; K = 10%; J = 5% 3. Rated (AC) voltage (e.g. 275 V) 4. Sub-class (e.g. X2) 5. Manufacturer's type designation (e.g. 338 2) 6. Code for dielectric material (MKP) for capacitors with original pitch = 15, 22.5 and 27.5 mm 7. Manufacturer 8. Year and week of manufacture (e.g. 0001) for capacitors with original pitch = 15, 22.5 and 27.5 mm 9. Safety approvals: products will be marked with european approvals and with UL and CSA marks.
MKP 338 2
144x12(halfpage)
FRONT FACE
1n0 M 338 2 BC 275V~X2 250V~ ND
V DE
OVE
PB501
CBB058
Fig.14 Example of marking for a capacitor with original pitch = 7.5 and 10 mm.
HEAD FACE 144x12(halfpage)
FRONT FACE
220n M 275V~X2 338 2 MKP
BC
PB501 OVE
V DE
0001
250V~ N
D
CBB059
Fig.15 Example of marking for a capacitor with original pitch = 15 mm.
144x12(halfpage)
HEAD FACE
470n 275V~ X2 338 2 MKP BC 0001 PB501
D
OVE
N
V DE
250V~
CBB060
Fig.16 Example of marking for a capacitor with original pitch = 22.5 or 27.5 mm
2000 Sep 11
14
BCcomponents
Product specification
Interference suppression film capacitors
Package marking The package containing the capacitors is marked as shown Fig.17.
MKP 338 2
Barcode label marking LINE 1 2 3 4 5 6 7 MARKING EXPLANATION Manufacturer's name Country of origin Sub-family Type description and sub class Capacitance value, tolerance, voltage and climatic category ("IEC 60068-1") Safety approvals Preference origin code: A Country of origin in code: 170 (Belgium) Responsible production centre: HQ Work order: WO Wage number of final inspection (only for capacitors with original pitch = 7.5 and 10 mm) Product type description Quantity and production period, year and week code Product code (12NC)
8 9 10
Fig.17 Barcode label.
2000 Sep 11
15
BCcomponents
Product specification
Interference suppression film capacitors
QUICK REFERENCE TEST REQUIREMENTS (see note 1) TEST Robustness of leads Tensile strength: "IEC 60068-2-21" Bending: "IEC 60068-2-21" Resistance to soldering heat: "IEC 60068-2-20" Component solvent resistance Robustness of component Rapid change of temperature: "IEC 60068-2-14" Vibration: "IEC 60068-2-6" Shock: "IEC 60068-2-27" Climatic sequence Dry heat: "IEC 60068-2-2" Damp heat, cyclic, test Db, first cycle: "IEC 60068-2-30" Cold: "IEC 60068-2-1" Damp heat, cyclic, test Db, remaining cycles: "IEC 60068-2-30" Voltage proof: "IEC 60384-14" Other applicable tests Damp heat, steady state: "IEC 60068-2-3" 56 days; 40 C; 90 to 95% RH no load Vp = 1200 V (DC); 1 minute |C/C| 5% Vp = 1200 V (DC); 1 minute 2 hours; -55 C 16 hours; 105 C 5 cycles 1 cycle = 30 minutes at -55 C and 30 minutes at 105 C 10 to 55 Hz; amplitude 0.75 mm; 6 hours half sinewave; 490 m/s2; 11 ms load 10 N; 10 s load 5 N; 4 x 90 solder bath: 260 C; 10 s no visible damage legible marking |C/C| 5% PROCEDURE (quick reference)
MKP 338 2
REQUIREMENTS
isopropyl alcohol; 23 C; 5 minutes
tan 80 x 10-4 (C 1 F); note 2 tan 50 x 10-4 (C > 1 F); note 2
|C/C| 5% tan 80 x 10-4 (C 1 F); note 2 tan 50 x 10-4 (C > 1 F); note 2
|C/C| 5% tan 80 x 10-4 (C 1 F); note 2 tan 50 x 10-4 (C > 1 F); note 2 Rins 50% of specified value
tan 80 x 10-4 (C 1 F); note 2 tan 50 x 10-4 (C > 1 F); note 2 Rins 50% of specified value |C/C| 10% tan 80 x 10-4 (C 1 F); note 2 tan 50 x 10-4 (C > 1 F); note 2 Rins 50% of specified value
Endurance (AC): "IEC 60384-14"
3 x 2.5 kV pulse voltage for X2; 1000 hours; 1.25 x URac at 105 C; once per hour; 0.1 s; 1000 V (RMS) via resistor of 47 ; Vp = 1200 V (DC); 1 minute
2000 Sep 11
16
BCcomponents
Product specification
Interference suppression film capacitors
MKP 338 2
TEST Charge and discharge: "IEC 60384-14"
PROCEDURE (quick reference) 10000 cycles; 5 ms; 1.5 x dV/dt |C/C| 10%
REQUIREMENTS
tan 80 x 10-4 (C 1 F); note 2 tan 50 x 10-4 (C > 1 F); note 2 Rins 50% of specified value
Passive flammability: "IEC 60384-14" Active flammability: "IEC 60384-14" Heat storage: "IEC 60384-14"
class B 20 x 2.5 kV discharge 1000 hours; 105 C
no burning no burning |C/C| 5% tan 80 x 10-4 (C 1 F); note 2 tan 50 x 10-4 (C > 1 F); note 2
Resistance to soldering heat with preheating: "IEC 60384-14" Active flammability test
preheating: 105 C; solder bath: 260 C; 10 s voltage proof up to 2 x peak impulse voltage of 4.13 or until breakdown (100 V/sec, current limited 2mA)
|C/C| 5% tan 80 x 10-4 (C 1 F); note 2 tan 50 x 10-4 (C > 1 F); note 2
no burning failed capacitors connected to a 250 Vac power supply during 5 minutes. Notes 1. For detailed information: see "Type detail specification HQN-384-14/111". 2. Measuring frequency 10 kHz for C 1 F and 1 kHz for C > 1 F.
2000 Sep 11
17

▲Up To Search▲

Price & Availability of MKP3382

	To Download MKP3382 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .