View IFR6813_4159214.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Microwave
IFR 6813/6815 Microwave Generator
Low Phase Noise Synthesized Source with 1Hz resolution
*
Three models covering frequencies: 10 MHz to 20 GHz 10 MHz to 40 GHz 10 MHz to 46 GHz Optional step attenuators Integrated FM option, external FM standard, swept, CW and CW list mode available Optional trigger board Modular design for rapid service Built-in user level calibration
List Mode Frequency list mode provides up to 1024 frequencies that can be entered into a list and output on receipt of a trigger command. The trigger modes comprise: internal continuous, internal single step, RS-232 control lines and external. The trigger sources can be from either: menu softkey, GPIB or RS-232 command (GET or *TRG) or a TTL trigger if the optional trigger board is fitted. List mode can be enabled in either forward or reverse direction through the frequency list. Several lists can be stored as instrument settings to internal memory or floppy disks. By using a 6230A or L series detector it is possible to carry out level calibration.
* *
* * *
Synthesized Generator The synthesized generator has low phase noise and 1 Hz frequency resolution. VCOs are used for frequencies above 3 GHz and an integrated RF synthesizer for the 10 MHz to 3 GHz range. Internal filtering results in excellent harmonic performance of <-55 dBc. Optional step attenuators are available to set low output powers for amplifier or receiver testing. In CW mode the generator can be used for local oscillator substitution. A power sweep is provided for amplifier gain compression testing. External FM can be applied by connecting an AF source to the rear panel. With the FM option, an internal generator provides frequency modulation of the source. When used with a scalar analyzer the generator provides a swept synthesized output for frequency characterization of components and systems.
SPECIFICATION
SOURCE
Functionality Synthesized CW Frequency List mode External frequency modulation Frequency Range 6813 10 MHz to 20 GHz 6815 10 MHz to 46 GHz 6815R 10 MHz to 40 GHz Resolution (Settable) 6813 6815 1 Hz to 20 GHz 1 Hz to 46 GHz Synthesized sweeper CW Power sweep Internal frequency modulation with Option 023
For the very latest specifications visit
www.aeroflex.com
CW Accuracy (Frequency Standard error x Frequency) 10 Hz Swept Accuracy (Typical) 300 ms Step Time 10 MHz to 3 GHz 3 GHz to 46 GHz 1 ms Step Time 10 MHz to 3 GHz 3 GHz to 46 GHz 10 ms Step Time 10 MHz to 3 GHz 3 GHz to 46 GHz List Mode Step Time <500 s minimum step time per point 10 MHz to 3 GHz <4 kHz 3 GHz to 46 GHz <40 kHz Levelled Power Range 6813 6815 10 MHz to 20 GHz 10 MHz to 8 GHz 8 GHz to 20 GHz 6815R 20 GHz to 24 GHz 24 GHz to 40 GHz 40 GHz to 46 GHz -10 -10 -10 -10 -10 -10 to to to to to to +10 dBm +8 dBm +5 dBm +4 dBm 0 dBm 0 dBm typ* +10 dBm typ +7 dBm typ +6 dBm typ +3 dBm typ <20 kHz <200 kHz <1 kHz <10 kHz <100 Hz <1 kHz
Internal Modulation Generator Option 023 & 022 (Group Delay) FM Source Modulation signal: sinewave, 0.1 Hz to 500 kHz, resolution 0.1 Hz Other specifications as for External Frequency Modulation except: Accuracy (1 kHz modulating frequency) 20 - 400 kHz deviation 5 % of indication 1 Hz excluding residual FM Pulse Generator Source Modes Trigger Modes Pulse Widths (PW) Resolution Pulse Period (PRI) Resolution Pulse Delay Resolution Sync Output Inputs/Outputs Trigger in/out Rear panel BNC connector provides either trigger input or sync output dependant upon trigger mode. TTL level Single Pulse External, Internal continuous 120 ns to >1 second 120 ns 240ns to 7 seconds (PRF <1 Hz to 4.16 MHz) 120 ns Zero to 100 ms where zero is <120 ns ref trigger or sync pulse falling edge 120 ns 120 ns pulse referred to trigger. Available at trigger socket
* Excluding the effect of connector moding 6813 + Option 011 (70 dB Step Attenuator) 10 MHz to 3 GHz -80 to +8 dBm 3 GHz to 20 GHz -80 to +7 dBm 6813 + Option 012 (90 dB Step Attenuator) 10 MHz to 3 GHz -100 to +8 dBm 3 GHz to 20 GHz -100 to +7 dBm 6815/6815R + Option 013 (70 dB Step Attenuator) 10 MHz to 8 GHz -10 to +6 dBm +8 dBm typ 8 GHz to 20 GHz -10 to +2 dBm +4 dBm typ 20 GHz to 24 GHz -10 to +1 dBm +3 dBm typ 24 GHz to 40 GHz -10 to -3 dBm 0 dBm typ
Note: For option 002 (Field Replaceable connectors) guaranteed levelled output is reduced by 0.5 dB.
Internal Levelling Accuracy at 0 dBm (no options fitted) 10 MHz to 3 GHz, 0.7 dB 3 GHz to 24 GHz, 1.0 dB 24 GHz to 40 GHz, 1.5 dB Levelled Power Accuracy With Options 011, 012 and 013 10 MHz to 3 GHz <1 dB ( 0.3 dB 2% of attenuator setting in dB whichever is greater) 3 GHz to 24 GHz <1 dB ( 1 dB 4% of attenuator setting in dB whichever is the greater) 24 GHz to 40 GHz <1.5 dB ( 1 dB 4% of attenuator setting in dB whichever is the greater) Linearity (No Options Fitted) Over Levelled Power Range Relative to 0 dBm 10 MHz to 40 GHz <0.5 dB
Settable Power Range* -110 dBm to +20 dBm *dependant on attenuator option Settable Power Resolution 0.01 dB Power Sweep Range (from Maximum Levelled Power) Without Attenuator >20 dB External Frequency Modulation Peak deviation (1 V peak input) 10 MHz - 375 MHz 1 kHz to 5 MHz 375 MHz - 750 MHz 250 Hz to 1.25 MHz 750 MHz - 1.5 GHz 500 Hz to 2.5 MHz 1.5 GHz - 3 GHz 1 kHz to 5 MHz 3 GHz - 46 GHz 20 kHz to 1 MHz Accuracy (1 kHz modulating frequency) 20-400 kHz deviation 3 % of indication 1 Hz excluding residual FM -3 dB bandwidth, AC coupled mode 10 MHz - 3 GHz 3 GHz - 46 GHz -3 dB bandwidth, DC coupled mode 10 MHz - 3 GHz 3 GHz - 46 GHz <100 Hz to >1 MHz typical <100 Hz to >500 kHz typical DC to >1 MHz typical DC to >500 kHz typical
Power Stability With Temperature (Typical) 10 MHz to 40 GHz <0.1 dB/C
Harmonics and Sub-Harmonics Over Levelled Power Range Harmonics <70 MHz, <-25 dBc 70 MHz to 24 GHz, <-55 dBc 24 GHz to 40 GHz, <-20 dBc Sub-Harmonics 10 MHz to 3 GHz, <-60 dBc 3 GHz to 20 GHz, none 24 GHz to 40 GHz, <-40 dBc Spurious Signals (Typical) For carrier frequencies <375 MHz Offset: 30 kHz to 150 kHz, <-50 dBc 150 kHz to 1 MHz, <-55 dBc > 1 MHz, <-55 dBc
For carrier frequencies >375 MHz Offset: 30 kHz to 150 kHz, <-50 dBc 150 kHz to 1 MHz, <-60 dBc > 1 MHz, <-60 dBc Phase Noise Ageing 2 in 107 per year (OCXO) External Frequency Standard 1 MHz or 10 MHz, Connector: BNC
REAR PANEL CONNECTORS
RS-232 9 way D-type connector, male, Baud rate 300 to 9600 GPIB Interface GPIB is IEEE 488.1 and 488.2 compatible. Frequency Standard In/Out BNC 1 MHz or 10 MHz input and 10 MHz output selectable from front panel Mod In/Out BNC Mod in/out Rear panel BNC connector, TTL level.Impedance approx 100 External Monitor Standard VGA, 640 by 480 color output, 15 way high density D-type female connector Voltage Output Auxiliary 9-pin connector. Settable for 0 to 10 V ramp, fixed voltage External Levelling Input Input voltage range: 0 to +1 V, Connector: BNC (f)
TRIGGER BOARD OPTION 24
Measured Phase Noise at 1 GHz
External Trigger Input Connector: BNC (f) TTL input to trigger sweep in frequency list mode, Connector: BNC (f) Lock Output Connector: BNC (f) TTL output indicating source locked
GENERAL FEATURES
Display Color active matrix TFT liquid crystal display with 16.5 cm (6.5") visible diagonal Data Storage and Firmware Upgrade 3.5" floppy disc drive, 1.44 Mb Weight - Model and Option Dependent 16 kg (35 Ib) Size (Not including front handles) 230 mm H x 430 mm W x 570 mm D (9" H x 17" W x 22" D) Power Supply Auto-sensing 90 V to 265 V, 45 Hz to 65 Hz AC. Plus 90 V to 110 V, 400 Hz AC. Consumption 150 W Rated Range of Use Temperature Humidity Temperature Humidity Altitude 6813 0 to +50C 6815 +5C to +45C Up to 93% RH at +40C -40 to +71C Up to 93% RH at +40C Up to 4570 m (15000 ft)
Measured Phase Noise at 10 GHz
Source Match (Typical) 1 MHz to 3 GHz, <-15 dB 3 GHz to 20 GHz, <-10 dB 20 GHz to 40 GHz, <-8 dB Output Connector 6813 Precision N type, female (standard) or Precision 3.5 mm, female (option) 6815 Precision 2.92 mm female or Field replaceable connectors (option)
FREQUENCY STANDARD
Internal 10 MHz OCXO Drift 5 in 108 over 0 to 55C
Conditions of Storage and Transportation
For the very latest specifications visit
www.aeroflex.com
ELECTROMAGNETIC COMPATIBILITY Conforms with the protection requirements of the EEC Council Directive 89/336/EEC. Conforms with the limits specified in the following standards: IEC/EN61326-1 : 1997, RF Emission Class B, Immunity Table 1, Performance Criteria B SAFETY Conforms with the requirements of EEC Council Directive 73/23/EEC (as amended) and the product safety standard IEC/EN 61010-1 : 2001 + C1 : 2002 + C2 : 2003 for class 1 portable equipment, for use in a Pollution Degree 2 environment. The instrument is designed to be operated from an Installation Category 2 supply.
Specifications involving 2.92 mm connectors above 40 GHz are not traceable to national standards as these do not exist at present. Typical specifications are non-warranted.
ACCESSORIES
6230A/L SCALAR DETECTORS Accessories for level calibration
6230A series Standard Detectors (-65 dBm to +20 dBm) typical
ACCESSORIES Miscellaneous Electrical Cables
43129/189 43139/042 GPIB Cable BNC (m) to BNC (m) 1.5 m
VERSIONS AND OPTIONS
When ordering please quote the full ordering number information. Ordering Numbers
6813 6815 6815R
Standard Microwave Cables Versions
10 MHz to 20 GHz Generator 10 MHz to 46 GHz Generator 10 MHz to 40 GHz Generator 54351/022 54351/025 54351/027 0.5 m, 18 GHz, N (m) to N (m) 0.5 m, 26.5 GHz, 3.5 mm (m) to 3.5 mm (m) 0.5 m, 40 GHz, 2.92 mm (m) to 2.92 mm (m)
Attenuators Supplied Accessories
46882/662 43123/076 37591/755 Operating Manual AC Supply Lead Front Panel Cover 56534/901 56534/902 56534/903 56534/904 Precision Fixed Coaxial Attenuator 3 dB DC to 18 GHz 5 W, N(m) to N(f) Precision Fixed Coaxial Attenuator 6 dB DC to 18 GHz 5 W, N(m) to N(f) Precision Fixed Coaxial Attenuator 10 dB DC to 18 GHz 5 W, N(m) to N(f) Precision Fixed Coaxial Attenuator 20 dB DC to 18 GHz 5 W, N(m) to N(f)
Options
002 011 012 013 023 024 Field Replaceable Precision N (f) or 3.5 mm (f) RF Connectors (6813), 2.92 mm (f) 6815, 6815R 20 GHz 70 dB Step Attenuator (only available for 6813) 26.5 GHz 90 dB Step Attenuator (only available for 6813) 40 GHz 70 dB Step Attenuator (only available for 6815) Internal Modulation Trigger board
MISCELLANEOUS
46885/038 46880 46882/351 84501 46662/695 54152/001 54211/008 Rack Mount Kit for 6800 Service Manual Maintenance Manual Soft Carrying Case Flight Case 3.5 mm Torque Wrench Compact Keyboard
Complementary Product
6146 6147 54441/019 500 MHz to 18 GHz Pulse Modulator 70 MHz to 40 GHz Pulse Modulator AC Power Supply for 6146 & 6147
Note : All specifications quoted are for operation at calibration temperature 3C. Specifications involving Type N connectors above 18 GHz are not traceable to national standards as these do not exist at present.
CHINA Beijing Tel: [+86] (10) 6467 2761 2716 Fax: [+86] (10) 6467 2821 CHINA Shanghai Tel: [+86] (21) 6282 8001 Fax: [+86] (21) 62828 8002 FINLAND Tel: [+358] (9) 2709 5541 Fax: [+358] (9) 804 2441 FRANCE Tel: [+33] 1 60 79 96 00 Fax: [+33] 1 60 77 69 22
GERMANY Tel: [+49] 8131 2926-0 Fax: [+49] 8131 2926-130 HONG KONG Tel: [+852] 2832 7988 Fax: [+852] 2834 5364 INDIA Tel: [+91] 80 5115 4501 Fax: [+91] 80 5115 4502 KOREA Tel: [+82] (2) 3424 2719 Fax: [+82] (2) 3424 8620
SCANDINAVIA Tel: [+45] 9614 0045 Fax: [+45] 9614 0047 SPAIN Tel: [+34] (91) 640 11 34 Fax: [+34] (91) 640 06 40 UK Burnham Tel: [+44] (0) 1682 604455 Fax: [+44] (0) 1682 662017
UK Stevenage Tel: [+44] (0) 1438 742200 Fax: [+44] (0) 1438 727601 Freephone: 0800 282388 USA Tel: [+1] (316) 522 4981 Fax: [+1] (316) 522 1360 Toll Free: 800 835 2352
As we are always seeking to improve our products, the information in this document gives only a general indication of the product capacity, performance and suitability, none of which shall form part of any contract. We reserve the right to make design changes without notice. All trademarks are acknowledged. Parent company Aeroflex, Inc. (c)Aeroflex 2004.
w w w.aeroflex.com info-test@aeroflex.com
Part No. 46891/167, Issue 2, 11/04

▲Up To Search▲

Price & Availability of IFR6813

	To Download IFR6813 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .