 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TLP320,TLP320-2,TLP320-4 TOSHIBA Photocoupler GaAs Ired & Photo-Transistor TLP320, TLP320-2, TLP320-4 Telecommunication Office Machine Telephone Use Equipment The TOSHIBA TLP320, -2 and -4 consists of a photo-transistor optically coupled to a gallium arsenide infrared emitting diode. The TLP320-2 offers two isolated channels in an eight lead plastic DIP package, while the TLP320-4 provides four isolated channels in a sixteen plastic DIP package. This is suitable for application of AC input current up to 150mA. * * * * * * IF maximum rating: 150mA Collector-emitter voltage: 55V (min.) Current transfer ratio: 25% (min.) (IF = 20mA) Isolation voltage: 5000Vrms (min.) UL recognized: file No. E67349 BSI approved: BS EN60065:2002, certificate no.7426 BS EN60950-1:2002, certificate no.7427 TOSHIBA Weight: 0.26g 11-5B2 Unit in mm Pin Configurations (top view) TLP320 1 2 1 : Anode Cathode 2 : Cathode Anode 3 : Emitter 4 : Collector 4 3 1 2 3 4 TLP320-2 8 7 6 1 2 3 TLP320-4 16 15 14 13 12 11 10 9 TOSHIBA Weight: 0.54g 11-10C4 5 1,3 : Anode Cathode 2,4 : Cathode Anode 5,7 : Emitter 6,8 : Collector 4 5 6 7 8 1,3,5,7 : Anode Cathode 2,4,6,8 : Cathode Anode 9,11,13,15 : Emitter 10,12,14,16 : Collector TOSHIBA Weight: 1.1g 11-20A3 1 2007-10-01 TLP320,TLP320-2,TLP320-4 Absolute Maximum Ratings (Ta = 25C) Rating Characteristic Symbol TLP320 Forward current LED Forward current derating Pulse forward current Junction temperature Collector-emitter voltage Emitter-collector voltage Detector Collector current Collector power dissipation (1 circuit) Collector power dissipation derating (1 circuit, Ta 25C) Junction temperature Storage temperature range Operating temperature range Lead soldering temperature Total package power dissipation Total package power dissipation derating (Ta25C) Isolation voltage (Note 1) IF IF /C IFP Tj VCEO VECO IC PC PC / C Tj Tstg Topr Tsol PT PT / C BVS 250 -2.5 150 -1.5 125 -55~125 -55~100 260 (10s) 200 2.0 150 -1.5 (Ta 25C) 1 (100s pulse, 100pps) 125 55 7 80 100 -1.0 TLP320-2 TLP320-4 Unit mA mA / C A C V V mA mW mW / C C C C C mW mW / C Vrms 5000 (AC, 1min., R.H. 60%) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). (Note 1) Device consider a two terminal: LED side pins shorted together and detector side pins shorted together. Recommended Operating Conditions Characteristic Supply voltage Forward current Collector current Operating temperature Symbol VCC IF IC Topr Min. -25 Typ. 5 20 1 Max. 24 120 10 85 Unit V mA mA C Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2 2007-10-01 TLP320,TLP320-2,TLP320-4 Individual Electrical Characteristics (Ta = 25C) Characteristic Forward voltage LED Forward current Capacitance Collector-emitter breakdown voltage Detector Emitter-collector breakdown voltage Collector dark current Capacitance collector to emitter Symbol VF IF CT V(BR) CEO V(BR) ECO ICEO CCE Test Condition IF = 100 mA VF = 0.7 V V = 0, f = 1 MHz IC = 0.5 mA IE = 0.1 mA VCE = 24 V VCE = 24 V, Ta = 85C V = 0, f = 1 MHz Min. -- -- -- 55 7 -- -- -- Typ. 1.4 2.5 60 -- -- 10 2 10 Max. 1.7 20 -- -- -- 100 50 -- Unit V A pF V V nA A pF Coupled Electrical Characteristics (Ta = 25C) Characteristic Symbol IC / IF Current transfer ratio IC / IF (high) Test Condition IF = 20 mA, VCE = 1 V IF = 100 mA, VCE = 1 V IC = 2.4 mA, IF = 20 mA IC = 2.4 mA, IF = 100 mA VF = 0.7V, VCE = 24 V IC (IF = -20mA) / IC (IF = +20mA) (Note) Min. 25 20 -- -- -- 0.5 Typ. -- -- -- -- 1 1 Max. -- 80 0.4 0.4 10 2 Unit % Collector-emitter saturation voltage Off-state collector current CTR symmetry (Note) VCE (sat) IC(off) IC (ratio) V A -- Isolation Characteristics (Ta = 25C) Characteristic Capacitance input to output Isolation resistance Symbol CS RS Test Condition VS = 0, f = 1 MHz VS = 500 V, R.H. 60% AC, 1 minute Isolation voltage BVS AC, 1 second, in oil DC, 1 minute, in oil Min. -- 5x10 10 Typ. 0.8 10 14 Max. -- -- -- -- -- Unit pF Vrms Vdc 5000 -- -- -- 10000 10000 (Note) IC1 = 1V) I (I = I , V IC(ratio) = C2 F F2 CE IC1(IF = IF1, VCE = 1V) IF1 IC2 IF2 VCE 3 2007-10-01 TLP320,TLP320-2,TLP320-4 Switching Characteristics (Ta = 25C) Characteristic Rise time Fall time Turn-on time Turn-off time Turn-on time Storage time Turn-off time Symbol tr tf ton toff tON ts tOFF RL = 1.9 k VCC = 5 V, IF = 16 mA (Fig.1) VCC = 10 V, IC = 2 mA RL = 100 Test Condition Min. -- -- -- -- -- -- -- Typ. 2 3 3 3 2 15 25 Max. -- -- -- -- -- -- -- s s Unit Fig. 1 Switching time test circuit IF RL VCC VCE IF tS VCE 4.5V 0.5V tON tOFF 4 2007-10-01 TLP320,TLP320-2,TLP320-4 IF - Ta 200 200 PC - Ta Allowable forward current IF (mA) Allowable collector power dissipation PC (mW) 160 160 TLP320 120 120 TLP320-2, -4 80 80 40 40 0 -20 0 20 40 60 80 100 120 0 -20 0 20 40 60 80 100 120 Ambient temperature Ta (C) Ambient temperature Ta (C) IFP - DR 5000 3000 Pulse width 100s Ta = 25C 100 50 Ta = 25C IF - V F Allowable pulse forward current 1000 (mA) Forward current IF 10-3 3 10 -2 30 10 5 3 (mA) IFP 500 300 100 50 30 1 0.5 0.3 10 3 3 10-1 3 100 Duty cycle ratio DR 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Forward voltage VF (V) VF / Ta - IF -3.2 1000 500 300 IFP - VFP Forward voltage temperature coefficient VF / Ta (mV / C) -2.4 -2.0 -1.6 -1.2 -0.8 -0.4 0.1 Pulse forward current IFP (mA) -2.8 100 50 30 10 5 3 1 0.6 Pulse width 10s Repetitive frequency = 100Hz Ta = 25C 0.3 1 3 10 30 50 1.0 1.4 1.8 2.2 2.6 Forward current IF (mA) Pulse forward voltage VFP (V) 5 2007-10-01 TLP320,TLP320-2,TLP320-4 IC - IF 200 100 Ta = 25C 2000 VCE=5V 1 0.4 10 5 3 1 0.5 0.3 0.1 0.1 1000 500 300 Ta = 25C IC / IF - IF (mA) 50 30 VCE=5V Collector current IC Current transfer ratio IC / IF (%) 100 50 30 10 5 3 1 0.1 1 0.4 0.3 1 3 10 30 100 0.3 1 3 10 30 100 Forward current IF (mA) Forward current IF (mA) ICEO - Ta 101 VCE=24V Collector dark current ICEO (A) 100 10 5 10 -1 10 -2 10 -3 10 -4 0 20 40 60 80 100 120 Ambient temperature Ta (C) 6 2007-10-01 TLP320,TLP320-2,TLP320-4 RESTRICTIONS ON PRODUCT USE * The information contained herein is subject to change without notice. 20070701-EN * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 7 2007-10-01 |
Price & Availability of TLP32007
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |