 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TLP261J Tentative TOSHIBA Photocoupler GaAs IRED + Photo-Triac TLP261J Unit: mm Triac Drivers Programmable Controllers AC-Output Modules Solid-State Relays The TOSHIBA mini-flat coupler TLP261J is a small-outline coupler suitable for surface mount assembly. The TLP261J consists of a photo-triac optically coupled to a gallium arsenide infrared-emitting diode. * * * * * * * Peak off-state voltage Trigger LED current On-state current Isolation voltage Zero-crossing function UL-recognized Option (V4) type VDE-approved Maximum operating insulation voltage : EN60747-5-2 satisfied : 565 VpK TOSHIBA Weight: 0.09 g 11-4C3 : UL1577, file No. E67349 : 600 V (min) : 10 mA (max) : 70 mA (max) : 3000 Vrms (min) : 6000 Vpk Highest permissible overvoltage Note: When an EN60747-5-2 approved type is needed, be sure to specify "Option (V4). * Construction Mechanical Rating Creepage distance Clearance Insulation thickness : 4.0 mm (min) : 4.0 mm (min) : 0.4 mm (min) Trigger LED Current Trigger LED Current (mA) Classification* VT =3 V, Ta = 25C Min (IFT7) Standard Max 7 10 T7 T7, blank Product Classification Marking Pin Configuration 1 6 3 ZC 1 : Anode 3 : Cathode 4 : Terminal 1 6 : Terminal 2 4 *Ex. (IFT7); TLP261J (IFT7) Note: Be sure to use standard product type names when submitting type names for safety certification testing, i.e., TLP261J (IFT7): TLP261J. 1 2005-02-22 TLP261J Maximum Ratings (Ta = 25C) Characteristic Symbol Rating Unit Forward current Forward current derating (Ta 53C) LED IF IF / C IFP VR Tj VDRM Ta = 25C Ta = 70C IT(RMS) IT / C ITP ITSM Tj Tstg Topr Tsol (Note 1) BVS 50 -0.7 mA mA / C A V C V mA mA / C A A C C C C Vrms Peak forward current (100 s pulse, 100 pps) Reverse voltage Junction temperature Off-state output terminal voltage On-state RMS current 1 5 125 600 70 40 -0.67 Detector On-state current derating (Ta 25C) Peak on-state current (100 s pulse, 120 pps) Peak nonrepetitive surge current (PW = 10 ms, DC = 10%) Junction temperature 2 1.2 100 -55~125 -40~100 Storage temperature range Operating temperature range Lead soldering temperature (10 s) Isolation voltage (AC, 1 min., R.H 60%) 260 3000 Note 1: Device considered as a two-terminal device: Pins 1 and 3 shorted together and pins 4 and 6 shorted together. Recommended Operating Conditions Characteristic Symbol Min Typ. Max Unit Supply voltage Forward current Peak on-state current Operating temperature VAC IF ITP Topr 15 -25 20 240 25 1 85 Vac mA A C 2 2005-02-22 TLP261J Individual Electrical Characteristics (Ta = 25C) Characteristic Symbol Test Condition Min Typ. Max Unit Forward voltage LED VF IR CT IDRM VTM IH dv / dt dv / dt(c) IF = 10 mA VR = 5 V V = 0, f = 1 MHZ VDRM = 600 V ITM = 70 mA Vin = 240 Vrms, Ta = 85C (Fig. 1) Vin = 60 Vrms, IT = 15 mA (Fig. 1) 1.0 200 1.15 30 10 1.7 0.6 500 0.2 1.3 10 1000 2.8 V A pF nA V mA V/s V/s Reverse current Capacitance Peak off-state current Peak on-state voltage Detector Holding current Critical rate of rise of off-state voltage Critical rate of rise of commutating voltage Coupled Electrical Characteristics (Ta = 25C) Characteristic Symbol Test Condition Min Typ. Max Unit Trigger LED current Inhibit voltage Leakage in inhibited state Turn-on time IFT VIH IIH tON VT = 3 V IF = Rated IFT IF = Rated IFT VT = Rated VDRM VD = 3 1.5 V, RL = 20 IF = rated IFT x 1.5 200 30 10 20 600 100 mA V A s Coupled Electrical Characteristics (Ta = 25C) Characteristic Symbol Test Condition Min Typ. Max Unit Capacitance (input to output) Isolation resistance CS RS VS = 0, f = 1 MHZ VS = 500 V, R.H. 60% AC, 1 minute 5x10 10 0.8 10 14 pF Vrms Vdc 3000 5000 5000 Isolation voltage BVS AC, 1 second, in oil AC, 1 minute, in oil Fig. 1: dv / dt test circuit Rin + VCC - 120 3 4 1 6 Vin 5 V, VCC 0V dv/dt(c) dv/dt RL ~ 4 k 3 2005-02-22 TLP261J IF - Ta 60 120 IT(RMS) - Ta 50 100 Allowable forward current IF (mA) 40 R.M.S on-stage current IT (RMS) (mA) 0 20 40 60 80 100 120 80 30 60 20 40 10 20 0 -20 0 -20 0 20 40 60 80 100 120 Ambient temperature Ta (C) Ambient temperature Ta (C) IFP - DR 3000 Pulse width 100 s Ta = 25 C 100 50 30 Ta = 25 C IF - VF Allowable pulse forward current IFP (mA) (mA) Forward current IF -3 -2 -1 0 1000 500 300 10 5 3 1 0.5 0.3 100 50 30 10 3 10 3 10 3 10 3 10 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Duty cycle ratio DR Forward voltage VF (V) VF/Ta - IF -3.2 -2.8 -2.4 -2.0 -1.6 -1.2 -0.8 -0.4 0.1 1000 500 IFP - VFP Pulse forward current IFP (mA) Forward voltage temperature coefficient VF/Ta (mV/C) 300 100 50 30 10 5 3 1 0.6 Pulse width 10 s Repetitive frequency = 100 Hz Ta = 25 C 1.0 1.4 1.8 2.2 2.6 3.0 0.3 1 3 10 30 50 Forward current IF (mA) Pulse forward voltage VFP (V) 4 2005-02-22 TLP261J Normalized IFT - Ta 3 2 VT = 3 V 3 2 Normalized IH - Ta Trigger LED current IFT (arbitrary unit) 0.5 Holding current IH (arbitrary unit) 1.2 1 1.2 1 0.5 0.3 0.3 0.1 -40 -20 0 20 40 60 80 100 0.1 -40 -20 0 20 40 60 80 100 Ambient temperature Ta (C) Ambient temperature Ta (C) 10 3 Normalized IDRM - Ta VDRM = Rated 1.4 Normalized VDRM - Ta 10 2 Off-state output terminal voltage VDRM (arbitrary unit) 20 40 60 80 100 Peak off-state current IDRM (arbitrary unit) 1.2 1.0 0.8 10 1 0.6 10 0 0.4 0 0.2 -40 -20 0 20 40 60 80 100 Ambient temperature Ta (C) Ambient temperature Ta (C) Normalized VIH - Ta 3 2 3 2 Normalized IIH - Ta Inhibit voltage VIH (arbitrary unit) 0.5 Inhibit current VIH (arbitrary unit) 1.2 1 1.2 1 0.5 0.3 0.3 IF = Rated IFT VT = Rated VDRM 0.1 -40 IF = Rated IFT 0.1 -40 -20 0 20 40 60 80 100 -20 0 20 40 60 80 100 Ambient temperature Ta (C) Ambient temperature Ta (C) 5 2005-02-22 TLP261J RESTRICTIONS ON PRODUCT USE * The information contained herein is subject to change without notice. 20070701-EN * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 6 2005-02-22 |
Price & Availability of TLP261J
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |