![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
SiI 3512 SATALink 2-Port PCI Host Controller Based on the proven architecture of the industry-leading SiI 3112 SATALinkTM PCI host controller, the SiI 3512 is a single-chip PCI to 2-port Serial ATA host controller. The chip is redesigned to fit in a smaller package (128 pin TQFP, 14x14mm) and to comply to the PCI 2.3 specification. Its compact size makes it ideal for space constrained applications. Like its predecessor, the chip is fully Serial ATA 1.0compliant and is interoperable with all Serial ATA devices in the market. Based on a 32-bit/66 MHz PCI interface, the SiI 3512 provides support for two independent Serial ATA devices and may be incorporated into motherboard or PCI add-in card designs. Users of the SiI 3112 can easily migrate to the SiI 3512 because its driver structure is similar to that of the SiI 3112. The SiI 3512 is the best price/ performance Serial ATA device that is both flexible and robust for today's demanding storage applications. When connectivity to more than two devices is required, multiple SiI 3512 devices may be used in the same application. With the SiI 3512, Silicon Image provides customers with drivers for the Windows, Linux and Netware operating systems for both RAID and non-RAID operations. Software RAID 0 (striping) and RAID 1 (mirroring) functions are supported through Silicon Image's SATARaidTM RAID management software utility. The SiI 3512 is designed for optimum performance and price. It leverages much of the circuit innovation at the physical layer of Silicon Image's proprietary reduced overhead Multi-layer Serial Link (MSLTM) architecture, pioneered and proven through its PanelLink(R) products and extended to the SATALink and Fibre Channel SerDes storage products. MSL technology is a multi-layer approach to providing cost-effective, multi-gigabit semiconductor solutions on a single chip for high-bandwidth applications. Ch. 0 TM Target Applications * PC Motherboards * PC Add-in Cards * Server Motherboards * Host Bus Adapters * RAID Subsystems * Embedded Applications 1.5 Gbps Serial ATA Hard Disk Drive Motherboard PCI Bus 266 MB/s 32-bit 33/66 MHz PCI-to-Serial ATA Host Controller SiI 3512 Ch. 1 TM 1.5 Gbps Serial ATA Hard Disk Drive SiI 3512 SATALink 2-Port PCI Host Controller SiI 3512 Bus Interface Data FIFO Serial ATA Transport Link & PHY Channel 0 1.5 Gbps (150 MB/s) TM SATALinkTM PCI to 2-Port Serial ATA Host Controller 32-bit 33/66 MHz SiI 3512 Features General PCI DMA Engine PCI Interface Arbiter PLL Flash & EEPROM Interface * Serial ATA - 1.5 Gbps (150 MB/s) * Compliant with Serial ATA 1.0 specification * Integrated Serial ATA Transport, Link logic and PHY layer * Supports 48-bit sector address feature set * Two independent bus master DMA channels with 256B FIFO per channel * Supports Virtual DMA in PCI with serial link in legacy PIO mode * Supports command buffering for ATA TF shadow registers * Supports up to 4 MB external Flash or EPROM for BIOS expansion * Supports ATAPI devices such as CD-ROM, CD-RW, DVD-ROM, DVD+R, etc. * Hot-Plug capable * Selectable drive strength for backplane applications * LED support for each channel * Supports spread spectrum clocking to reduce EMI PCI DMA Engine Bus Interface Data FIFO Serial ATA Transport Link & PHY Channel 1 1.5 Gbps (150 MB/s) TM Power * Core: 1.8V, I/O: 3.3V operating voltage with 5V tolerance * ACPI: PCI Bus Power Management Spec 1.1 compliant Contents Include: Hardware * SiI 3512 reference design board Software * Base Operating System Drivers: Windows 98, ME, NT4, 2000 and XP * SiI Configuration Utility * Flash Utility * Base BIOS Documentation * SiI 3512 Reference Board User's Guide * SiI 3512 Data Sheet * Serial ATA PCB Design Guide * SiI 3512 Reference Board Schematics Package * 128-pin, 14x14 mm TQFP (Thin Quad Flat Pack) Transfer Rates * Supports PIO and DMA modes * Supports Serial ATA Gen. 1 transfer rates of 1.5 Gbps Silicon Image's SiI 3512 Starter Kit PCI Features * 32-bit, 33/66 MHz PCI * PCI 2.3 compliant Part Number - SII3512CT128 The CP3512SATA150 Starter Kit includes hardware, software and documentation to quickly bring Serial ATA interface compliance to PC systems, server systems, motherboards, add-in cards and embedded solutions. (c)2003 Silicon Image, Inc. All rights reserved. Silicon Image, the Silicon Image logo, MSL, SATALink, the SATALink logo, SATARaid, PanelLink, SiI, SiI 3112 and SiI 3512 are trademarks or registered trademarks of Silicon Image, Inc. in the United States and other countries. Other trademarks are property of their respective holders. Product specifications are subject to change without notice. Printed in the U.S.A. 2/03 SiI PB-0039 Silicon Image, Inc. 1060 E. Arques, Sunnyvale, CA 94085 T 408.616.4000 F 408.830.9530 www.siliconimage.com |
Price & Availability of SII3512
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |